Download Kontron User's Guide
Transcript
KTD-N0857-A Page 6 3 Specifications 3.1 Functional Specifications Specifications System on Chip (SoC): NVIDIA® Tegra® 3 Quad Cortex-A9 multi-processing ARM® cores up to 1.3 GHz core frequency ARMv7 instruction set 32 kB data and 32 kB instruction L1 cache per core Shared 1 MB L2 cache DDR3 memory interface up to DDR3L-1600 with maximum size of 2 GB SPITM flash controller Three USB ports (EHCI) with one client interface Audio-Video Processor (AVP, GeForce® GPU) with a dual display controller Two integrated audio controllers (PCM and Inter-IC Sound, called IIS or I2S) One Secure Digital / MultiMedia Card (SD/MMC) controller with four instances Three PCI Express® ports (only single lane configuration) One S-ATA® 2.0 port Some pins are useable as GPIOs (max. 18 x 3.3V) or as special function pins (e.g. keyboard) Five UARTs with 16450/550 compatible mode (only two UARTs available) Onchip SPITM Flash Controller Supports FIFO and DMA mode access Maximum transfer rate of 35 Mbps Onchip Universal Serial Bus (USB) All ports are capable to handle USB 2.0 (EHCI) One port alternatively supports USB client functionality Supports USB 1.1 low and full speed devices without a companion USB 1.1 host controller Onchip Graphics Processing Unit (GPU) Ultra low power GPU up to 520 MHz internal clock and 12 cores Two independent display controllers support 2D/3D graphics rendering 1080p Video Encode Processor to deliver full HD video streams OpenGL® ES 2.0 support HDMI® V1.4a interface (max. 1920x1080 pixels) Low Voltage Differential Signaling (LVDS) flatpanel interface supports 18/24 bit color depth with a maximal resolution of 1920x1200 pixels Full hardware acceleration of video decode standards (extract): H.264, MPEG4 and VC1 KTT30/mITX Users Guide