Download Resources User Guide - 2KB

UDPMAXPACKET=8192
Client /Server
Maximum UDP packet size. The correct value depends on the TCP/IP stack
size.
CLIENTPACKETGATE= n
Client
Number of packets that can be sent out from the client before a response back
from the server to eliminate buffer overflow. When using PC TCP, try setting
this to 4.
SERVERPACKETGATE= n
Server
Number of packets that can be sent out from the server before a response back
from the client to eliminate buffer overflow. When using PC TCP, try setting
this to 4.
SRVTIMEOUTMIN=15
Server
Number of minutes a server will wait until it logs a user off.
MAXSERVERS=3
Server
This can be set to the number of network protocols used to save memory. One
server application is generated to handle each protocol used. Set this switch to
the number of protocols used to use less memory. Maximum setting is 4.
SRVRELOGINOK=Y
Server
Let the Server allow a user to login from the same node without logging off
first.
AMS REALTIME Projects Switches
These switches can be added to the AMS REALTIME Projects configuration
file to specify defaults for the direct interface between AMS REALTIME
Projects and the AMS REALTIME Resources database.
RTRERRORLOG=filename
RTP <-> RTR
When executing the interface between AMS REALTIME Projects and AMS
REALTIME Resources, this file will contain any exception messages, such as
missing resources or activities.
RTRRZADJUSTLEVEL=N
RTP <-> RTR
If this switch is set to N, the requirement will be spread out over the duration of
the activity. If this is set to Y, the requirement will be front loaded at the
starting requirement date.
169
AMS REALTIME Resources User Guide
 Advanced Management Solutions, Inc., Issue 1.1