1
Download ECS v3.5.2 User Guide
Transcript
LDAP SNMP TRAPS SERVERS Displays the IP address and port number of configured SNMP traps servers. Click the Add and Edit buttons to display the SNMP Trap Server Properties dialog box for adding SNMP traps servers and modifying settings. For more information, see Adding and Modifying SNMP Traps Servers on page 71. ADDING AND MODIFYING SNMP TRAPS SERVERS The SNMP Traps Server Properties dialog box enables you to define the IP address, port and enabled traps for each SNMP traps server. Type the traps server IP address, port number and use the Add and Remove buttons to select the traps you wish to monitor on the SNMP traps server. The default port for SNMP traps servers is 162. Figure 5-13 LDAP SNMP Traps Servers Properties Dialog Box The LDAP section of the Settings tab enables the LifeSize Gatekeeper to access LDAP directory services, including authentication, authorization, endpoint location, updating of endpoint information and retrieving Neighbor Gatekeeper lists. Note The available configuration options vary depending on which option you select in the Schema type field. For more information, see Options available when the Gatekeeper schema is selected on page 76 and Options available when the H.350 schema is selected on page 79. Settings Tab 71
