1
Download Version 7.0.0 User's guide
Transcript
Mapix V7.0.0 User’s guide 4.6 37 The grid To determine the position of each spot, a grid containing the parameters (spot spacing, diameter, etc...) used at slide creation must be assigned. To assign a grid, you can use either a GAL file, which is a standard ATF file generated by the spotter itself, or the grid creation tool. 4.6.1 Open an existing grid file (GAL file) You can import an existing GAL file by using the icon «Open a grid / Import a grid from a GAL file» at the tool window or at the «Analyze» tab of the Main Menu. If the image corresponds only to a part the slide, and the GAL file contains the complete grid a message will ask to confirm for loading the grid: Select «Yes» to continue, then select the block corresponding to the image: Selecting the “Apply” option, Mapix will automatically open the part of the grid corresponding to the selected block. With the option “Open whole grid” the whole grid will be charged independently of the blocs present in the image. Finally, the option “Cancel” will stop the grid opening process. Parc Activestre – 31390 CARBONNE – France Tel : +33 561 971 974 / Fax : +33 561 971 975 ‐ [email protected]
