1
Download Stellaris Peripheral Driver Library User's Guide
Transcript
Flash Parameters: ulUser0 is the value to store in USER Register 0. ulUser1 is the value to store in USER Register 1. Description: This function sets the contents of the user registers (0 and 1) to the specified values. Returns: Returns 0 on success, or -1 if a hardware error is encountered. 10.3 Programming Example The following example shows how to use the flash API to erase a block of the flash and program a few words. unsigned long pulData[2]; // // Set the uSec value to 20, indicating that the processor is running at // 20 MHz. This call is only needed on a Sandstorm or Fury device. // FlashUsecSet(20); // // Erase a block of the flash. // FlashErase(0x800); // // Program some data into the newly erased block of the flash. // pulData[0] = 0x12345678; pulData[1] = 0x56789abc; FlashProgram(pulData, 0x800, sizeof(pulData)); September 05, 2012 143
