Download Kontron User's Guide

6 Interfaces
®
VESA DDC2B/DPMS support
®
Flat-panel interface
®
Brightness and contrast control
Supported Resolutions for CRT
®
Up to 1024 x 768 x 16bpp (64k colors)
®
1280 x 1024 x 8bpp (256 colors)
Supported Resolutions for LCD (JIDI)
®
With LVDS transceiver on the backplane:
®
Only TTL signals:
up to 1024 x 768 x 16bpp (64k colors)
up to 640 x 480 x 16bpp (64k colors)
Simultaneous Resolution Mode (CRT and LCD)
®
Up to 800 x 600 x 16bpp
TV Output Support
®
6.9.1
PAL and NTSC composite 640 x 480 (only available on BIOS revisions XBD1R113.rom
and later)
Configuration
The graphics controller requires the following resources:
®
An IRQ
®
Several I/O addresses
®
Memory-address blocks in high memory
BIOS allocates the resources during AGP configuration. Many resources are set for compatibility with
industry-standard settings.
6.10
Digital Flat Panel Interface (JIDI)
Optionally, the X-board<861> supports the JUMPtec Intelligent Digital Interface (JIDI). It provides the
possibility to store controller specific panel configuration data in an external eeprom. It additionally
allows to store the panel ID regarding the JILI3 specification.
As a special feature also this panel ID can be directly keyed in the BIOS setup. Therefore an external
EEPROM on the panel interface is no longer necessary.
Please contact Kontron Embedded Modules Technical Support for more information.
6.11
Television Output
The X-board<861> supports television output (only available on BIOS revisions XBD1R113.rom and
later). Standard PAL and NTSC composite output supported.
Kontron User's Guide
X-board™ <861>
17