Download PTC Translator Products User Guide - John J. Jacobs

System Messages
List of System Messages
A call was made to a function to convert an IGES NURBS curve entity to an IGES
composite entity and the IGES NURBS curve entity was not a definition of a
composite curve (only contained a single segment). The application should verify
that the correct call is being made.
IGEO_NURBSNOTCOPIOUS
The IGES NURBS curve data does not represent a copious data
entity.
A call was made to a function to convert an IGES NURBS curve to an IGES
copious data entity and the IGES NURBS curve entity does not define a copious
data entity. The application should verify that the correct call is being made.
IGEO_NURBSNOTLINE
The form of the IGES NURBS curve is not a line(1).
A call was made to a function to convert an IGES NURBS curve entity to an IGES
line entity and the IGES NURBS curve entity was not a definition of a line. The
application should verify that the correct call is being made.
IGEO_NURBSNOTPOINT
The IGES NURBS curve data does not represent a point entity.
A call was made to a function to convert an IGES NURBS curve to an IGES point
entity and the IGES NURBS curve entity does not define a point. The application
should verify that the correct call is being made.
IGEO_NURBSNOTUNKNOWN
The IGES NURBS curve data does not represent an unknown form.
A call was made to a function to convert an IGES NURBS curve to an IGES
unknown curve entity when the form of the IGES NURBS curve entity is not
unknown. The application should verify that the correct call is being made.
IGEO_OFFSETTYPENOTSUPPORTED
The IGES curve offset type is not currently supported.
The IGES offset curve type is currently not supported for the requested processing
of the IGES offset curve.
C-74
PTC Translator Products User Guide