1
Download HIPS and SIPS User Guide
Transcript
Convert Data: Options for Specific Formats navigation records in the file and multibeam will convert it from multibeam records. 5. Select either Navigation or Multibeam as the source of Attitude Data. Convert Side Scan 6. To convert side scan data, select the Convert Side Scan check box. Survey mode ELAC XSE data can be recorded as 108 beams or 126 beams (depending on the survey mode). The Pad Transducer 1 with NULL beams writes 63 beams to Transducer 1 so that the same HIPS Vessel File (HVF) can be used for both survey modes. 7. Click the Pad Transducer 1 with NULL beams check box so that the soundings associated with transducer 1 are padded to have 63 beams. 8. Click Next. Furuno 1. Make sure the Convert Side Scan option is checked to include side scan data with the bathymetric data. CARIS HIPS and SIPS User Guide 103
