Download XiIIIPlus User's Guide

P
Parallel Communication Setting, 54
Parallel Data Port, 21, 104
Parallel Port Interconnections, 104
Parity Setting, 55
Password-Protected Parameters, 44
PAUSE Key Self Test, 89
PCMCIA Card Installation, 105
Power Cord
Overview, 3
Specifications, 98
POWER Switch, 25
Power-On Self Test, 87
Print Method Setting, 48
Print Mode Setting, 46
Print Modes, 8
Print Quality Problems, 84
Print Speed Setting, 46
Print Width Setting, 49
Printer
Anatomy Overview, 4
Configuration, 15–16, 46–65
Diagnostics, 87–91
Driver Configuration, 16
Printhead Pressure Adjustment, 78
Printing a Test Label, 19
Printing Specifications, 96
Protocol Setting, 55
R
Removal of Label Liner, 38
Reporting Damage, 2
Resynch Mode Setting, 62
Ribbon
Calibration, 17
Loading, 13, 39
Removal, 41
Requirements, 3
Specifications, 96
Ribbon Length Setting, 47
RS-232 Interconnections, 100–101
RS-422/RS-485 Interconnections, 103
RTC Settings
Date, 63
Time, 63
Zebra XiIIIPlus™ Printers User’s Guide
S
Save Changes Setting, 65
Save-a-Printhead Cleaning Film, 70–73
Self Tests
Additional Printer Self Tests, 87
CANCEL Key, 88
Communications Diagnostics Test, 91
FEED Key and PAUSE Key, 91
FEED Key, 90
PAUSE Key, 89
Power-On, 87
Sensor Profile Setting, 52
Sensor Type Setting, 48
Serial Communication Setting, 54
Serial Data Port, 22, 99–103
Setup Mode
Entering, 43
Leaving, 45
Software Configuration, 16
Specifications
Bar Codes, 95
General, 95
Media Handling, 93
Media, 97
Options, 93
Power Cord, 98
Printing, 96
Ribbon, 96
Standard Features, 93
ZPL Programming Language, 94
Start Print Signal Setting, 62
Storage, 2
Subnet Mask Setting, 64
System Interfaces, 21
T
Tear-Off Setting, 46
Test Label (Printing), 19
Toggle Positioning, 78
Transmissive Sensor Positioning, 10
Troubleshooting
Communications, 85–86
LED Error Conditions and Warnings, 81–83
Print Quality Problems, 84
Wrinkled Ribbon, 85
111