Download AssuredSAN 3000 Series RAIDar User Guide

Table 11
FA MIB 2.2 objects, descriptions, and values (continued)
Object
Description
Value
connUnitPortType
Port type
not-present(3), or n-port(5) for
point-to-point topology, or l-port(6)
connUnitPortFCClassCap
Bit mask that specifies the classes of
service capability of this port. If this
is not applicable, returns all bits set
to zero.
Fibre Channel ports return 8 for
class-three
connUnitPortFCClassOp
Bit mask that specifies the classes of
service that are currently operational.
If this is not applicable, returns all
bits set to zero.
Fibre Channel ports return 8 for
class-three
connUnitPortState
State of the port hardware
unknown(1), online(2), offline(3),
bypassed(4)
connUnitPortStatus
Overall protocol status for the port
unknown(1), unused(2), ok(3),
warning(4), failure(5),
notparticipating(6), initializing(7),
bypass(8)
connUnitPortTransmitter
Type
Technology of the port transceiver
unknown(1) for Fibre Channel ports
connUnitPortModuleType
Module type of the port connector
unknown(1)
connUnitPortWwn
Fibre Channel World Wide Name
(WWN) of the port if applicable
WWN octet for the port, or empty
string if the port is not present
connUnitPortFCId
Assigned Fibre Channel ID of this
port
Fibre Channel ID of the port
connUnitPortSn
Serial number of the unit (for
example, for a GBIC). If this is not
applicable, returns an empty string.
Empty string
connUnitPortRevision
Port revision (for example, for a
GBIC)
Empty string
connUnitPortVendor
Port vendor (for example, for a GBIC) Empty string
connUnitPortSpeed
Speed of the port in KByte per
second (1 KByte = 1000 Byte)
Port speed in KByte per second, or 0
if the port is not present
connUnitPortControl
Not supported
invalid(2) for an SNMP GET
operation and not settable through
an SNMP SET operation
connUnitPortName
String describing the addressed port
See External details for
connUnitPortTable on page 131
connUnitPortPhysical
Number
Port number represented on the
hardware
Port number represented on the
hardware
connUnitPortStatObject
Not supported
0 (No statistics available)
connUnitEventTable
Includes the following objects as specified by the FA MIB2.2 Spec
connUnitEventUnitId
connUnitId of the connectivity unit
that contains this port
Same as connUnitId
connUnitEventIndex
Index into the connectivity unit’s
event buffer, incremented for each
event
Starts at 1 every time there is a table
reset or the unit’s event table reaches
its maximum index value
All bits set to 1 if the Fibre Channel
ID is not assigned or if the port is not
present
AssuredSAN 3000 Series RAIDar User Guide 127