Download Installation and operating instructions

Basic control principles
Using two terminals
5.11
5
Using two terminals
When installing the terminal in a tractor in which there is already another terminal, you must configure
both terminals so that communication works between both units.
The following table will tell you which settings you need to configure, and the chapters in which these
are described.
30322537-02-EN
Parameter
Chapter
ISOBUS-UT: Function instance
Basic settings [➙ 36]
Login as ISOBUS-UT
Basic settings [➙ 36]
Communication with ISOBUS-TC
Configuring the Tractor ECU [➙ 53]
Configuring the list of connections
Configuring the list of connections [➙ 60]
V3.20140812
33