Download GEMA Operating Instructions - KW

GEMA Operating Instructions
80 mm (3.15 in)
120 mm (4.72 in)
66 mm (2.6 in)
106 mm (4.17 in)
Figure 16:
Dimensions and
mounting dimensions of
the HMI control unit
Depth = 60 mm (2.36 in)
4.5
Installation of the cabling
Prior to the installation of the cabling, read and understand this chapter and
observe the instructions and information given there.
Note: The pin assignments of the various connection cables can be found in
chapter 2 on page 7.
4.5.1
Assembled connection cables
We recommend to always use the supplied factory-assembled connection
cables delivered by KW-Generator GmbH & Co. KG. These cables have been
selected according to the special requirements of the described systems and
passed extensive tests. Therefore, they provide the best possible conditions for
an operation free of errors or malfunctions.
The connection cable between HMI control unit and joystick is pre-assembled
and supplied with 4-pole connection plugs.
The connection cables between GEMA generator and HMI control unit
(generator cable) as well as the cable for connecting the magnet plate (power
cable) are pre-assembled and supplied with the corresponding connection
plugs.
Note: If you do not want to use the supplied cables, please contact the service
at KW-Generator GmbH & Co. KG.
24