Download Operating Instructions

6.6 MENU EDIT – PLANT CONFIGURATION
S p e c t r u m I/Q
Via this menu you can invert the spectral position of the user signal.
• Select menu item Edit >
Spectrum I/Q.
—> This function can also be selected by the context menu (right mouse
button).
In the menu the lines of all cassettes are listed, possible to set the spectral position.
• Via the check boxes select from which lines you would like to change the
spectral position (check box marked).
• Use button
in order to switch the selected lines to
spectral position "normal".
• Use button
in order to switch the selected lines to
spectral position "inverse".
—> This function is also possible in the output settings of the corresponding cassettes.
—> The changes are only effective when they were sent to the plant
.
Close the menu:
• Close the menu via the menu item Back or buttons
- 80 -
/
.
CCRS 1000 v.55