1
Download Operating Instructions - ACS-Control
Transcript
Prosonic M - HART dist./meas. value Appendix 008 the following are displayed: - distance membrane to level - measured value check distance 051 manual distance = ok distance too small range of mapping. 052 accept proposed value or specify range of mapping start mapping 053 dist./meas. value 008 the following are displayed: - distance membrane to level - measured value off on dist. unknown distance too big 015 in safety dist. 016 from blocking distance Default: 0,1m warning self holding alarm max. scale 046 diameter vessel 047 max. scale 046 dist./meas. value 008 echo quality 056 ackn. alarm 017 no yes the following are displayed: - distance membrane to level - measured value is displayed 20 mA value 069 offset 057 simulation output damping 058 Default: 2 s will be added to the measured level blocking dist. is displayed output current 065 059 Return to Group selection safety distance 067 specify value fixed cur. value sep. character 096 simulation value sim. level sim. volume sim. current display test 097 0A5 measured level 0A6 detection window off on reset distance unit 066 off on . period , comma measured dist. sim. off 064 0C5 temperature unit 0C6 0A7 application par. 0A8 not modified modified download mode 0C8 parameter only param. + cust. map mapping only L00-FMU4xxxx-19-00-02-en-005 Endress+Hauser ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected] 71 71
