Download Operating Instructions - ACS-Control

Configuration level
Name
Value range Description
Block parameter level (only visible with BlueControl!)
0
Released
1
Blocked
Block configuration level (only visible with BlueControl!)
0
Released
1
Block
Block calibration level (only visible with BlueControl!)
0
Released
1
Blocked
IPar
ICnf
ICal
Default
1
1
1
- the engineering tool for the BluePort controller series
+3 BlueControl
engineering tools with different functionality facilitating MIR-4x1 configuration
3 engineering tools with different functionality facilitating KS4x-1 configuration
and parameter
parameter setting
setting are
are available
available (see
and
(see chapter
chapter 10:
10: Accessory
Accessory equipment
equipment with
with
ordering
information).
In
addition
to
configuration
and
parameter
setting,
the
enordering information).
gineering
are used for and
dataparameter
acquisitionsetting,
and offer
storage
andused
print
In
additiontools
to configuration
the long-term
engineering
tools are
for
data acquisition
and offertools
long-term
storage to
and
print functions.
The engineefunctions.
The engineering
are connected
MIR-4x1
via the front-panel
" by
ring
tools
are
connected
to
KS4x-1
via
the
front-panel
interface
"BluePort
interface „BluePort„ by means of PC (Windows 95 / 98 / NT) and a PC adaptor.
means
of PCBlueControl:
(Windows 95
/ 98
/ NT)9:
and
a PC adaptor.
Description
see
chapter
BlueControl
(page 49)
Description BlueControl: see chapter 9: BlueControl (page 49)
4.3 Set-point processing
The set-point processing structure is shown in the following picture:
SP.x
126
125
Xeff
run
Ada
internal setpoint
Err
Ü
ù
programmer
timer
external
setpoint SP.E
INP2
0/4...20 mA
1
{
2
3
4
5
6
7
SP.Hi
0
*
SP.Lo
limitation
Ö
actual
r.SP setpoint
2.setpoint SP.2
- LED
ramp
Index:
Ü : int/ext-setpoint switching
* : configuration SP.Fn
Ö : SP / SP.2 switching
The ramp starts at process value
with the following switchings:
- int / ext-setpoint switching
- SP / SP.2switching
- Manual-/ Automatic switching
- at power on
Operating
KS4x-1
29
Set-point processing
ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
29