Download Operating Instructions WA 8

5 Installation
5.4.4
Cross-slide height
Check
Fig. 5-29 Cross slide height check
Insert a card approx. 0.5 mm thick between the underside of the crosscut fence
and the sliding table surface. The card must move freely in all positions. The
crosscut fence must be parallel to the sliding table surface.
Adjustment
Fig. 5-30 Cross slide height adjustment
Adjust the height of the bolt at the end of the swinging arm and relock the nut.
If the gap between the underside of the crosscut fence and the surface of the
sliding table changes as the sliding table is moved, the parallelism of the telescopic part of the arm and the surface of the sliding table must be checked.
61
Installation