Transcript
To install EZ Slide Cabinet Hardware, (metal slide on handles and pulls) 1. Place inside edge of handle over back edge of cabinet door or drawer. 2. Place other hand on the handle, and gently but firmly slide handle down, allowing the handle to spread over the cabinet edge. To fit your specific cabinet width, the handles can flex wider or narrower. You may need to try this for a good fit. www.YouTube.com/EZSlide1 for installation videos EZ Slide Cabinet Hardware –Pulls and Handles – No Drilling needed Made with recycled aluminum Like us on Follow us on Thank you! EZ Slide Cabinet Hardware EZ Slide Hardware
