Download Arrow SBMAMW Instructions / Assembly

Step 1
You will need for this page:
SB
SFB
(QTY: 4)
(QTY: 1)
06L
69953 9
Plastic Foot
10682 4
Floor Section
10683 2
10685 2
10686 2
F/R Floor
Section
F/R Floor
Channel
Side Floor
Channel
LNS
1
(QTY: 8)
Assemble the Floor as shown and secure with four (4) Small Bolts and Nuts and one (1) Small Flat Head
Bolt and Nut in between middle Floor Section. Add a Plastic Foot to the Small Flat head Bolt when attaching
middle Floor Sections together.
DO NOT TIGHTEN BOLTS AT THIS TIME.
10682
10683
Do not tighten Small Bolts
until after Floor is square.
2
69953
SB
10683
10682
SFB
SB
SB
Slide the Front and Rear Floor Channels and Side Floor Channels onto the Floor as shown. Secure using
eight (8) Long Screws where holes align. At each Screw attach a Plastic Foot. Screws must enter from bottom.
10686
10685
10686
69953
10685
69953
LNS
69953
LNS
LNS
10685
10686
10685
10683
66
The Floor should be aligned with the
Front and Rear Floor Channels as
shown to the left.