1
Download General International 30-300 M1 Use and Care Manual
Transcript
SPECIFICATIONS FEATURES • Heavy duty enclosed stand protects motor from dust and wood chips. TABLE SIZE 25 9/16” X 20” (650 X 508 mm) EXTENSION WING (2) SIZES 15” X 21 1/4” (380 X 538 mm) • Positive gear design for quick and accurate table adjustments. TOTAL SURFACE OF WORK TABLE 55’’ X 20” (1437 X 506 mm) • Large cast iron extension wings. MAX. PLANING WIDTH 20” (508 mm) • Built in table rollers reduce friction. MAX. THICKNESS OF STOCK 8” (202 mm) • Large handwheel quickly adjusts table height. MAX. DEPTH OF CUT 3/ ” (2.3 mm) 32 • Convenient top mounted return rollers allow smooth stock handling for consecutive planing/multiple passes. MIN. LENGTH OF STOCK 6 3/4” (172 mm) NUMBER OF KNIVES 3 • Comes with knife setting gauge. CUTTERHEAD SPEED 5000 RPM • Equipped with three (3) drive belts. CUTS PER INCH (26 mm) 78 @ 16 FPM (4.87 MPM) 62.5 @ 20 FPM (6.10 MPM) • Built-in mobile base with one-step lock-pedal. CUTTERHEAD DIAMETER 3.15” (80 mm) FEED RATES (2) 16 & 20 FPM (4.87 & 6.1 MPM) MOTOR 5 HP, 220 V, 1 PH, 23.2 A WEIGHT 880 LBS (400 kg) PARTS LIST 30-300 PART N0. DESCRIPTION 30300-77 30300-78 30300-79 30300-80 30300-82 30300-83 30300-84 30300-85 30300-86 30300-87 30300-88 30300-89 30300-90 30300-91 30300-92 30300-93 30300-94 30300-95 30300-96 30300-97 30300-98 30300-99 30300-100 30300-101 30300-102 30300-103 30300-104 30300-105 30300-106 30300-107 30300-108 30300-109 30300-110 SAFETY HATCH CAP SCREW PULLEY GUARD BOLT NUT BELT PULLEY COVER NUT SWITCH BOARD SWITCH HEX NUT NAME PLATE RIVET CHAIN RELIEF BUSHING POWER SUPPLY WIRE TOOTH WASHER CAP SCREW SET SCREW LABEL COLLAR SHAFT IDLE PULLEY BRACKET SHAFT HANGER SPRING WASHER BRACKET CAP SCREW LABEL WARNING LABEL CAP SCREW SPECIFICATION M8 X 1.25P - 40 5/16" - 18NC 5/16" - 18NC 3/16" x 24 2x5 06B x 67P BW-5 M6 X 1.0P - 12 M8 X 1.25P - 8 8.2 X 22 X 3t M6 X 1.0P X 12 M6 X 1.25 X 18 M5 X 0.8 X 10 QTY 1 1 1 2 2 3 3 1 2 1 1 2 1 4 1 1 1 2 11 1 1 1 1 1 1 1 1 1 2 1 2 1 1 NOTES 15 PARTS LIST 30-300 PART N0. 30300-01 30300-02 30300-03 30300-04 30300-05 30300-06 30300-07 30300-08 30300-09 30300-10 30300-11 30300-12 30300-13 30300-14 30300-15 30300-20 30300-21 30300-22 30300-23 30300-24 30300-25 30300-27 30300-28 30300-29 30300-30 30300-31 30300-32 30300-33 30300-34 30300-35 30300-36 30300-37 30300-38 30300-39 30300-40 30300-41 30300-42 30300-43 30300-44 30300-45 30300-46 30300-47 30300-48 NOTES 22 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G DESCRIPTION GEAR BOX OIL SEAL BEARING GEAR CAP SCREW WASHER CAP SCREW BEARING GEAR SHAFT KEY GEAR KEY SHAFT GEAR KEY BALL SPRING SHAFT OIL SEAL SPROCKET CHAIN HEX. HD. SCREW CLUTCH HANDLE WASHER HEX. HD. SCREW OIL RING KNOB PIN PACKING PIECE COVER CAP SCREW OIL PLUG CAP SCREW KNIFE SETTING GAUGE ROD (NOT SHOWN) KNIFE SETTING GAUGE FOOT (NOT SHOWN) C-CLIP (NOT SHOWN) 17-19 MM WRENCH (NOT SHOWN) 12-14 MM WRENCH (NOT SHOWN) 8-10 MM WRENCH (NOT SHOWN) SCREW (FOR DUST CHUTE) (NOT SHOWN) WASHER (FOR DUST CHUTE) (NOT SHOWN) SPECIFICATION TC 28 X 40 X 8 6204 ZZ M6 X 1.0P - 25 6.2 x 22 x 3t M6 X 1.0P - 12 .6201 5 X 5 X 12 5 X 5 X 10 6 X 6 X 40 6 SC24 06B x 47 M6 X 1.0P - 16 6.3 X 13 X 1.5t M6 X 1.0P - 12 P-12 8 x 20 M6 X 1.0P - 25 PT1 / 4-19 M8 X 1.25P - 50 QTY 1 1 2 1 1 2 1 5 1 1 1 1 2 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 5 2 4 1 2 4 1 1 1 6 6
