Transcript
® BULLETIN NO. SERVICE PARTS LIST 55-40-0600 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS BAND SAW TABLE CATALOG NO. 48-08-0260 STARTING SERIAL NO. 00 0 REVISED BULLETIN DATE June 2005 WIRING INSTRUCTION EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). NOTE: EARLY VERSIONS OF BAND SAW TABLES UTILIZE PLOW BOLTS (27a) AND NEW VERSIONS USE CARRIAGE BOLTS (27b). BE SURE TO CHECK THE BOLT CONFIGURATION BEFORE REPLACING. FIG. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27a 27b 28 29 30 31 32 PART NO. 45-88-0830 06-75-5825 42-28-0250 44-52-0250 43-34-0580 45-88-0915 06-55-2500 45-88-0830 06-57-4980 44-90-0290 40-50-2710 44-60-0840 06-83-2690 06-55-1500 28-10-0325 45-88-0915 06-75-4675 42-20-0620 43-74-0110 44-60-0850 44-40-0610 06-75-4696 42-60-0130 06-65-1585 42-68-0540 06-75-4696 42-32-0250 06-10-1205 06-75-3925 45-88-1020 42-90-0180 10-98-5225 42-40-0820 49-96-0120 DESCRIPTION OF PART 1/2" Bellville Washer 1/2-13 x 3-1/2" Socket Hd. Cap Screw Mounting Block Assembly Friction Pad Mounting Flange Assembly 3/8" Hardened Washer 3/8-16 Hex Nut 1/2" Bellville Washer 1/2-13 Jam Nut Split Ring 1" O.D. Lock Pin Spring Locking Pin 1/4-20 x 1-3/4" Socket Hd. Set Screw 1/4-20 Hex Nut Bandsaw Mounting Bracket 3/8" Hardened Washer 3/8-16 x 1" Socket Hd. Cap Screw Base Chain Hook Swivel Pin Crank Nut 3/8-16 x 1-1/4" Socket Hd. Cap Screw Chain 5/8" Pitch x 21" Long 3/16 x 1" Roll Pin Mounting Vise 3/8-16 x 1-1/4" Socket Hd. Cap Screw 3/8-16 x 1-1/2" Plow Bolt 3/8-16 x 1-1/2" Carriage Bolt 5/16-18 x 5/8" Socket Hd. Cap Screw 5/16" Flat Washer 3/4" N.P.T. Galv. Coupling Warning Label Bushing 5/16" Allen Wrench NO. REQ. (1) (1) (1) (1) (1) (2) (2) (2) (2) (1) (1) (1) (2) (2) (1) (2) (2) (1) (1) (1) (1) (2) (1) (1) (1) (2) (2) (2) (4) (4) (4) (1) (2) (1) MILWAUKEE ELECTRIC TOOL CORPORATION 13135 W. LISBON RD., BROOKFIELD, WI 53005 Drwg. 2
