Download Viatek UBF01-G Use and Care Manual
Transcript
Tabletop Bladeless Fan Instructions The Bladeless Tabletop Fan can be powered either by battery or USB connection. 1. To use USB power, simply plug the included cord into the side of the fan (see Fig. 1). You may plug the USB end of the cord into a desktop computer, laptop, or any other USB outlet to power the fan. 2. To install batteries, slide the panel at the bottom of the fan in the direction indicated by the arrow on the panel (see Fig. 2). Install 4 AAA batteries and replace the panel. Fig. 1 Fig. 2 The adjustable angle back on the Tabletop Fan can be used to direct the breeze. 1. Extend the easel from the back of the fan (see Fig. 4). 2. Lean the fan back to rest on the easel (See Fig. 5). Fig. 3 Fig. 4 Fig. 5 The cooling sponge can be used to activate the Tabletop Bladeless Fan’s Cool Breeze feature. 1. To access the sponge, slide off the back panel by pushing it down (see Fig. 6). 2. Remove the cooling sponge and dampen with water. The sponge should not be wet to the point of dripping. If necessary, gently press the excess moisture from the sponge before freezing. Lay sponge flat in freezer so that it freezes in a shape that fits in the fan properly. Once the sponge is frozen, place it in the back of the fan (see Fig. 7). You may also apply fragrance to the cooling sponge to act as an air freshener, but it is recommended that a modest amount of fragrance is used the first time so that you can better gage how strong you would like the scent in the future. 3. Replace the back panel, starting from the position in Fig. 8 and pushing up. The Cool Breeze feature is now activated, making your Tabletop Bladeless Fan’s breeze extra cool. It is recommended that the sponge be allowed to dry completely while installed in the back of the fan so that it retains its shape. Fig. 6 Model No. BFT01 Fig. 7 REV- 02/25/13 PATENT PENDING For customer service call 888.7.VIATEK or visit us online at viatekproducts.com For Canada customer service call 423.402.9010 or visit us online at viatekproducts.com Pour le service a la clientele appelez le 888.7.VIATEK ou visitez viatekproducts.com Para servicio al consumidor llame al 888.7.VIATEK o visite viatekproducts.com Read instructions Before Operating MADE IN CHINA Viatek No Question Protection - Protect your product with Viatek Warranty Services. Product is replaced or reimbursed 100%. Protection for 1-year beyond our standard warranty, No shipping charges, no deductible, Your product is protected from any mechanical or electrical failures caused by power surges or manufacturer’s defects. Order online at viatekproducts.com today. © 2012 VIATEK CONSUMER PRODUCTS GROUP, INC. All specifications and prices are subject to change without notice. All rights reserved. Fig. 8