Download HomeSelects 6219 Instructions / Assembly

www.HomeSelects.com
Accessories included
Mount the metal clips to the surface where light is to be placed.
The mounting clips should be spaced 31” apart
Snap the fixture into the clips making sure it is secure
Never drill through fixture to mount. This will compromise the
water tight feature and could cause damage to the fixture.
4 Mounting the fixture
Assemble the light fixture using the clips.
Make sure the acrylic diffuser is seated correctly for a tight fit.
Install the T-8 fluorescent tubes carefully (tubes not included).
3 Assembly of light fixture
Connect the black supply wire to the black fixture wire.
Connect the white supply wire to the white fixture wire.
Connect the ground supply wire to the ground fixture wire.
2 Connecting the wires
Remove the metal fixture pan from the base housing
by pinching together the retainer clips.
Install the retainer clips by snapping them into the
base housing.
1 Assembly of the light fixture
INSTALLATION INSTRUCTIONS:
CAUTION: To prevent electric shock, do not insert
any objects through openings.
WARNING: Installation must be performed by a
qualified licensed electrician.
DANGER: Before installation, turn off the main
power at the circuit breaker.
Assembly and safety instructions
3.5”
WHITE Fixture Wire
BLACK Fixture Wire
BLACK Supply Wire
WHITE Supply Wire
GROUND Supply Wire
CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE
ANY QUESTIONS PRIOR TO INSTALLATION
Install the T-8 fluorescent tubes
Thank you for purchasing this Vapor Tight Light. For more information
please e-mail us at [email protected]
GROUND Fixture Wire
Wiring diagram
Install the diffuser retainer clips
Pinch the mounting clips to remove
and replace the light frame
(Mounting hole locations)
31”
50”
#6219 Fluorescent T-8 Light
T-8 Vapor Tight Light