Transcript
K-5841 OFFSET KITCHEN SINK Roughing-In Product Information Applicable product: Drop-in kitchen sink with two holes Drop-in kitchen sink with four holes Under-mount kitchen sink with four holes Fixture*: Sink Bowl area, large Recommended accessories: P-Trap K-5841-2 K-5841-4 K-5841-4U Optional accessories: Bottom bowl rack, left bowl Bottom bowl rack, right bowl Duostrainer® sink strainer Install this product according to the installation guide. NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Bowl depth Drain hole Faucet hole Drop-in models Ø 1-3/8″ (35 mm) Under-mount model Ø 2-3/8″ (60 mm) * Approximate measurements for comparison only. Included component: Cut-out template Undermount sink kit 23″ (584 mm) 2-1/4" (57 mm) 2-1/4" (57 mm) K-6160 K-6162 K-8801 Installation Notes 17-1/8″ (435 mm) x 18-5/16″ (465 mm) 11-1/16″ (281 mm) x 17-5/16″ (440 mm) 9″ (229 mm) Ø 3-7/8″ (98 mm) Bowl area, medium K-9000 Fixture conforms to standard ASME A112.19.1/CSA B45.2. All dimensions are nominal. 1148647-7 1054375 K-5841-4 13-1/2" (343 mm) 4" (102 mm) 4" (102 mm) 6-3/4" (171 mm) 2-5/16" 2-1/4" (59 mm) (57 mm) K-5841-2 13-1/2" (343 mm) 2-1/4" (57 mm) 2-5/16" (59 mm) 9-1/4" (235 mm) 2-1/4" (57 mm) 2-1/4" (57 mm) 7-11/16" (195 mm) 13-1/2" (343 mm) 4" (102 mm) 18-1/8" (460 mm) 33" (838 mm) 9/16" (14 mm) 9-5/8" (244 mm) 15" (381 mm) 1-1/2" OD OFFSET KITCHEN SINK 1148646-1-C K-5841-4U 1-1/2" OD 22" (559 mm) 4" (102 mm) 2-5/16" (59 mm)
