Transcript
K-5871 RIVERBYTM UNDER-MOUNT KITCHEN SINK Roughing-In Product Information Applicable product: Under-mount kitchen sink K-9000 Optional accessories: Under-mount sink kit 36″ (914 mm) Wood cutting board Bottom bowl rack, right side Duostrainer® sink strainer K-5807 K-6246 K-6255 K-8801 K-5871-5UA3 Fixture*: Bowl area 30-1/4″ (768 mm) x 17-1/4″ (438 mm) Water depth 9″ (229 mm) Drain hole Ø 3-7/8″ (98 mm) Faucet holes Ø 2-3/8″ (60 mm) * Approximate measurements for comparison only. Included components: Cut-out template Under-mount sink kit 23″ (584 mm) 1166727-7 1054375 Included accessories: Bottom bowl rack, left side Colander with integral cutting board Utility rack with soaking cup K-6237 K-6239 K-6194 4-1/2" (114 mm) Recommended accessories: P-Trap 16-1/2" (419 mm) Installation Notes Install this product according to the installation guide. NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Fixture conforms to ASME standard A112.19.1/CSA B45.2. All dimensions are nominal. 4" (102 mm) 4-1/2" (114 mm) 10" (254 mm) 2-1/16" (52 mm) 22" (559 mm) 25-13/16" (656 mm) 33" (838 mm) 9/16" (14 mm) 15" (381 mm) 1-1/2" OD RIVERBYTM UNDER-MOUNT KITCHEN SINK 1173298-1-C 9-5/8" (244 mm)
