Download Symmons S-86-1-X-BODY Instructions / Assembly

Location:
Temptrol®
Shower & Tub-Shower Mixing Valve
Models S-86-1-BODY-X, S-86-2-BODY-X
Specification & Parts Assembly Submittal
Model Numbers
Feature Highlights
 S-86-1-BODY-X Shower Valve
4-Port Temptrol Shower mixing valve with integral
volume control. Includes plug installed in tub supply
output port.
 S-86-2-BODY-X Tub-Shower Valve
4-Port Temptrol Tub-Shower mixing valve with
integral diverter.
Warranty
■■ Symmons Temptrol 4-port pressure-balancing mixing valve
with adjustable stop screw to limit handle turn
■■ Integral service stops to allow water shut-off for servicing
valve
■■ Supply input ports 1/2 inch sweat
■■ Output ports NPS Threaded 1/2 inch
■■ Integral volume control port (S-86-1-BODY-X only)
■■ Integral diverter (S-86-2-BODY-X only)
Standards / Certifications
■■ Limited Lifetime - to the original end purchaser in
residential/consumer installations.
■■ 5 years - for commercial installations
ASME A112.18.1-2005/CSA B125.1-05
Dimensions Temptrol Shower & Tub-Shower Valve, 4-port valve with service stops
Service stop
4-11/16"
(119 mm)
2-5/16"
Output
(59 mm)
port
4-5/8"
(118 mm)
(open, fully CCW)
Cold supply
input port
Hot supply
input port
1-5/16"
(33 mm)
1-1/4"
(32 mm)
2X 3/4"
(19 mm)
diameter
Adjustable screw
to limit handle turn
(max temperature)
Diverter /
Volume control
Tub supply port
2-5/8"
(67 mm)
1-5/16"
(33 mm)
11/16"
(17 mm)
2-7/16"
(61 mm)
3/16"
(6 mm)
Note: (1) Input supply ports are 1/2" sweat
Ouput ports NPS 1/2" threaded
(2) plug for tub supply port is required
for shower only valve installations
Parts Assembly
Temptrol Tub-Shower Valve, S-86-1-BODY-X / S-86-2-BODY-X
S-86-1-BODY-X.......Shower only valve (v1)
S-86-2-BODY-X.......Tub Shower valve (v2)
Service stop and retainer kit (T-52)
Shower
supply
output
Hot & cold seat
repair kit (TA-4)
Retainer
wrench, (T-55C)
Hot seat
removal tool
(T-35A)
Cold supply input
Temptrol
Valve
Cold seat
removal tool
(T-35B)
Retainer
hot
seat
Hot
supply
input
Service
stop
(v1) plug inserted
(v2) Tub supply
output
cold
seat
5/16" Allen
wrench
Pull out
to remove
Control spindle
assy. (TA-10)
5/16" wood
screw
(v1) Volume spindle...TA-25A
(v2) Diverter spindle..TA-25B
hot washer screw
hot washer
Control spindle
cold
washer
retainer
washer repair kit
cold
washer
(TA-9)
spindle cap gasket
Spindle cap assembly
(T-12A)
Spindle cap assy.
& control spindle
(TA-10/12)
spindle cap gasket
spindle cap
limit stop screw
o-ring
Spindle cap
washer
washer repair kit
washer
(T-16)
packing nut
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250 ■ Fax (800) 961-9621, (781) 664-1300
Website: www.symmons.com ■ Email: c u s t o m e r [email protected]
©2009, 2010 Symmons Industries, Inc. Printed in U.S.A.
■
060810
TEMP LIMIT
stop adjust