Transcript
6779-4466 6 Shelf Closet System A 6 ea ©2012 Whitmor, Inc. E 2 ea Shelf assembly F 12 ea Foot Shelf locking collar Assembly Time: Less than 45 minutes. B 2 ea Bottom vertical pole C 2 ea Middle vertical pole G 2 ea Vertical pole lock assembly (These two parts are pre-assembled) D 2 ea Top vertical pole with claw STEP 1. Start by sliding shelf locking collar (F), then shelf assembly (A) onto two bottom vertical poles (B). Repeat for second, and third shelf assemblies. Insert two feet (E) into bottom of bottom vertical poles (B). F A F A F A This product's intended use is for closet storage. STEP 2. Insert and lock two middle vertical poles (C) by sliding into (B) and locking. Tools Needed: No tools required. STEP 3. Slide shelf locking collar (F), then fourth shelf assembly (A) onto two middle vertical poles (C). Repeat for the fifth, and sixth shelf assemblies. D D G F F F F A F F F A F B E Shelf Closet System can be installed on a standard closet rod, or on a wire shelf. comes pre-assembled. Note: Poles (B&C) slide into groove and twist to lock. Note: Completed Note: G Part (G) A B STEP 4. Place two vertical pole lock assemblies (G) onto top of middle vertical poles (C). Insert top vertical poles with claw (D) and tighten (G). Part A B C D E F G F C C Reference F7495 F7496 F7497 F7498 F7499 F7500 F7501 MADE IN CHINA E 8680 Swinnea Road • Suite 103 • Southaven, MS • 38671 NEED HELP? For help with assembly, or if you are missing a part, please call Whitmor’s Customer Service Department, 1-888-944-8667 between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday. Or email: [email protected]. Visit us online at www.whitmor.com Rev#0 9.14.12 Printed in China
