Download YARDGARD Select 328801A Installation Guide
Transcript
3 Instrucciones de instalación del YARDGARD SELECT™ STAGE 3: GATE INSTALLATION • Determine which post will be the latch post and which will be the hinge post. Escanee para ver el video de instalación • Loosely install top post hinge with pin pointing up approximately 8˝ from the top of the hinge post (Fig. 19). • Loosely install self-closing post hinge with pin pointing up approximately 10˝ from the bottom of the hinge post (Fig. 19). • Loosely install top gate hinge to gate frame approximately 7˝ from the top of the hinge post (Fig. 19). • Loosely install self-closing gate hinge to gate frame approximately 7˝ from the bottom of the gate (Fig. 19). • Align the gate by placing it level with the top of the fence. Adjust the hinges to allow for full swing. Tighten all hinges. • Install gate latch to the gate frame at the desired height. Install PVC Post Protector to the latch post at where latch will close. (Fig. 19) NOTE: Easy-to-install double gate and decorative fence medallions are available on homedepot.com. Top GATE Hinge Fig. 19 Gate Installation Top POST Hinge ÍNDICE 48" Gate Latch PRIMEROS PASOS ETAPA 1: INSTALACIÓN DEL ARMAZÓN DE LA VALLA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ETAPA 3: INSTALACIÓN DEL PORTÓN . . . . . . . . . . . 21 Herramientas y materiales. . . . . . . . . . . . . . . . . . . . . . . 13 Lista de piezas del portón de cierre automático . . . . . . . 21 Lista de piezas del armazón de la valla. . . . . . . . . . . . . 13 Hinge Post Paso 1: Instalación de los postes de esquina, PVC Post Protector de extremo y de portón . . . . . . . . . . . . . . . . . . . . . . . . . 14 Paso 2: Instalación de los postes de línea . . . . . . . . . . . 15 Self-Closing POST Hinge Latch Post Paso 3: Instalación de los herrajes de poste. . . . . . . . . . 16 Paso 4: Instalación del travesaño superior. . . . . . . . . . . 17 ETAPA 2: INSTALACIÓN DE LOS PANELES DE LA VALLA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Herramientas y materiales. . . . . . . . . . . . . . . . . . . . . . . 18 Self-Closing GATE Hinge Herramientas y materiales. . . . . . . . . . . . . . . . . . . . . . . 21 Instalación del portón . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 COMO RECORDATORIO... • ¿Ha completado su Guía de planificación y compra YARDGARD SELECT™? • ¿Ha comprado todos los componentes del YARDGARD SELECT™ requeridos? • ¿Tiene listas todas las herramientas y materiales recomendados? Lista de piezas de los paneles de la valla. . . . . . . . . . . . 18 Paso 1: Instalación del alambre tensor . . . . . . . . . . . . . 19 Gate Frame PAGE 10 Post YARDGARD SELECT™ - FENCE FRAMEWORK INSTALLATION INSTRUCTIONS Paso 2: Instalación de los paneles de la valla. . . . . . . . . 20 YARDGARD - FENCE FRAMEWORK INSTRUCTIONS PAGE 11 © 2014 SELECT Midwest™Air Technologies, Inc INSTALLATION • 6700 Wildlife Way, Long Grove, IL 60047 • SERVICIO AL CLIENTE: 800-628-8815