Transcript
Protector Strip Installation Instructions 1. Sweep or vacuum area where Protector Strips are to be positioned. 2. Unroll Protector Strips so the rough side is facing upward. 3. Position Protector Strips on the floor, so the tires will be centered on the Protector Strips. 4. Protector Strips can be adhered to floor with double-sided foam tape (not included). Made in U.S.A. 6345 Nancy Ridge Drive, San Diego, CA 92121 (858) 625-0005 ● (800) 992-2018 ● Fax (858) 625-0010 ● Email: [email protected]
