Download Vermont Casting DVT38S2IN User's Manual

Chateau™ Direct Vent Gas Fireplace
Remote Control Transmitter
Operating Instructions
Introduction
This transmitter operating range is approximately 20 feet (6 m). The transmitter operates on one of 1,048,576 security
codes that are programmed into the transmitter at the factory; this transmitter operates on radio frequencies with nonTransmitter
Wall Clip
Slot
Off
Continuous
Pilot Button
Mode Button
The transmitter operates on (2) 1.5V AAA batteries. It is recommended that ALKALINE batteries always be used for longer
battery life and maximum operational performance.
��
On H/L
Button
ON H/L
Before using the transmitter, install the (2) AAA transmitter batteries into the battery compartment. (Use caution that batteries
are installed in the proper direction.)
OFF/CONTINUOUS
PILOT BUTTON
MODE
SET
Set Button
Battery
Compartment
FP1818
ON H/L
1
FP1818
Skytech remote
9/07
Key Settings
1. ON H/L
OFF
Continuous
Pilot
2
MODE
3
2. OFF
CONTINUOUS PILOT
3. MODE
4. SET
SET
— Turns unit to ON and operates
the flame control HI or LO.
4
— Shuts the unit OFF and activates the continuous pilot on
feature.
— Changes unit from manual
mode to thermostatic mode.
— Sets temperature in thermo
mode.
LCD - Liquid Crystal Display
7
2
�����
1
4
3
����
���
����
5
1.
2.
3.
4.
5.
6.
DISPLAY
° F or ° C
FLAME
ROOM
TEMP
SET
7. PILOT
Indicates CURRENT room temperature.
Indicates degrees Fahrenheit or Celsius
Indicates burner/valve in operation
Indicates remote is in THERMOSTATIC mode
Appears during manual operation
Appears while setting the desired temperature in the thermostatic mode
Appears in the Continuous Pilot mode
6
20011957
10
FP1819
LCD display
9/07