Download Toro Chemical Injection Specifications

Chemical Injection
Micro-Irrigation
Mazzei® Injectors
Mazzei injectors offer an economical highly efficient means of injecting
gases and liquids, such as chlorine, fertilizers, and other agricultural
chemicals into a pressurized water system. Mazzei injectors use differential
pressure to create a low-pressure zone which draws the chemicals into a
pressurized water line.
Operation:
Mazzei injectors are venturi-type injectors:
When pressurized water enters the injector inlet, it is constricted toward the
injection chamber and changes into a high-velocity jet stream. The increase
in velocity through the injection chamber results in a decrease in pressure,
thereby enabling an additive material to be drawn through the suction port
and entrained into the water stream. As the jet stream is diffused toward the
injector outlet, its velocity is reduced and it is reconverted into pressure
energy (but at a pressure lower than injector inlet pressure).
Application:
• Agricultural irrigation systems using drip and/or sprinkler irrigation,
or any pressurized water system where a gas or liquid needs to be injected
Features and Benefits:
• Saves labor
• Safe to use as the chemicals are under vacuum, not pressure
• Ensures even distribution of chemicals
• No external power source is required in most systems
• Low maintenance - no moving parts
• Chemicals cannot be injected when the irrigation system is off
• Available in Polypropylene or PVDF (Kynar®) - Kynar is extremely
resistant to most chemicals, including acids
• Available with NPT or BSPT threads
Why PVDF (Kynar)?
Kynar is extremely resistant to most agricultural chemicals: Sulfuric acid,
Nitric acid, Chlorine, and Gypsum (Gypsum is very abrasive). Polypropylene
is not recommended for the above materials.
Required Information for Liquid Injection Applications
The following information and calculations are required to determine the proper size and model of
Mazzei injector for liquid fertilizer injection. Below is a worksheet.
1. Determine total water flow (gpm or lpm):
______
2. Determine rate of injection required in (gph or l/min):
______
3. Determine pressure differential across injector:
a. System, or pump pressure at inlet to injector in (psi or Kg/cm2)
______
b. Pressure (back pressure) at outlet of injector in (psi or Kg/cm2)
______
c. Available pressure differential (3a – 3b) in (psi or Kg/cm2)
______
d. Percentage pressure differential [(3c/3a)x(100)]
______%
3.4. Determine installation method:
a. If the pressure differential (3d above) is 20% or greater, the injector can be
utilized without a booster pump. See “Typical Installations” page.
b. If the pressure differential (3d above) is less than 20%, the injector must be
installed in series with a booster pump. See “Typical Installations” page.
Injector Selection:
The injector performance tables in this
brochure list the motive flow values and suction
capacities for Mazzei® injectors under various
pressure conditions. Other applications exist
that are not covered in this brochure. Please
consult a Toro Micro Irrigation representative for
help with those inquires.
From the calculations above, use the
performance tables in the back of this brochure
to select an injector model that can exceed the
required injection (suction) rate. The total
water flow of the system must be greater than
the injector’s motive flow capacity (water flow
through the injector). The injector may be
installed in a “bypass” so that only the required
part of the total water flow passes through the
injector.
1. Locate the injector inlet pressure (psi or
Kg/cm2), step 3a above, which most
closely corresponds to your maximum
available water pressure.
2. Locate the injector outlet pressure (psi
or Kg/cm2), step 3b above,which most
closely corresponds to your system
pressure downstream of the injector
after installation.
3. Review the performance tables to
locate an injector model that has a
suction capacity that is greater than the
required suction capacity (gph or
l/min), step 2 above. Use a metering
valve or orifice assembly to obtain the
precise suction required.
x
x
x
x
x
x
x
BSPT Polypropylene Green
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
BSPT PVDF Blue
283
287
384
384X
484
584C
484A
484X
584
684
878-02
885X-02
1078-02
1583A
1585X
1587
2081A
2083X
3090
4091
NPT Polypropylene Black
Injector
Model
Numbers
NPT PVDF Black
Injector Product Range
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Injector Models and Kit Assemblies
Injector
Size
In/Out
MNPT or BSPT
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
1.0"
1.0"
1.0"
1.5"
1.5"
1.5"
2.0"
2.0"
3.0"
4.0"
Maximum Suction Capacity
@ 50 psi
@ 3.4 bars
Suction
Line Kit
Only
gph
6.0 gph
8.3 gph
14.1 gph
33.9 gph
17.4 gph
25.6 gph
17.4 gph
41.7 gph
25.6 gph
25.0 gph
74.8 gph
140 gph
92.4 gph
227 gph
323 gph
261 gph
631.0 gph
1175.0 gph
1236 gph
2820 gph
lph
22.7 lph
31.4 lph
53.4 lph
128.4 lph
65.9 lph
96.9 lph
65.9 lph
157.8 lph
96.9 lph
95.0 lph
283 lph
530 lph
350 lph
860 lph
1222 lph
988 lph
2388 lph
4448 lph
4678 lph
10673 lph
K-184
K-184
K-184
K-184
K-184
K-184
K-184
K-184
K-184
K-184
K-183
K-183
K-183
K-183
K-183
K-183
K-282
K-282
N/A
N/A
Bypass &
Suction
Line Kit
K-184-A
K-184-A
K-184-A
K-184-A
K-184-A
K-184-A
K-184-B
K-184-B
K-184-B
K-184-B
K-181-A 02
K-181-A 02
K-181-A 02
K-183-A
K-183-A
K-183-A
K-282-A
K-282-A
N/A
N/A
* Bypass and suction line kit combination is not available with BSPT threads for 1" and larger injectors
** 1/2" NPT threads are compatible with 1/2" BSPT threads
*** The 1" injectors ending with part number 02 have a new check valve design the same as the 1 1/2" injectors
Bypass and Suction Line Kit:
Specifying Information
Example part number:
AIV1583A-P (1.5" MNPT black poly injector)
XXX
XXXXX
-
XXX
(blank) PVDF (Kynar®)
P
Polypropylene black
PPG
Polypropylene green
Injector model number
AIV NPT threads
AIC BSPT threads
Suction Line Kit:
1. Tubing clamp
2. Metering Valve
3. Tubing (10FT.)
4. Strainer
Note: Injector not
included in the kits
Typical Installations
Bypass installation
Injector installed around a
point of restriction such as a
regulator valve or gate valve
which creates a differential
pressure, thereby allowing the
injector to produce a vacuum.
Note: Always consult state and local requirements
for backflow protection and chemical use
Typical Installations
Bypass with reduced pressure
differental requirement.
Chemical injection can be turned
on or off with a controller.
Booster pump installation
Injector installed across
the differential pressure
created by an existing
booster or supply pump
in the system. It is
plumbed from the
discharge side to the
intake side of the pump.
Performance Table
Injector Performance Table
Water Suction Capacity • Injector Inlet Pressure 5-50 PSIG
Operating Pressure
PSIG
Injector
Inlet
5
10
15
20
25
30
35
40
45
50
Injector
Outlet
0
1
2
3
4
0
2
5
7
8
0
5
7
10
12
0
5
10
12
15
0
5
10
15
20
0
5
10
15
20
25
0
5
10
15
20
25
0
5
10
15
20
25
30
0
5
10
15
20
25
30
35
0
5
10
15
20
25
30
35
40
Model
283
1/2" Threads
Motive
Water
Flow
Suction
GPM
GPH
0.17
3.2
2.0
1.1
(3.5)
0.24
(26.0)
0.43
(37.0)
0.65
0.70
(27.0)
0.75
(31.0)
6.0
6.0
5.8
4.9
3.4
2.7
1.0
(33.5)
0.48
0.58
0.81
0.85
(39.0)
1.0
1.2
1.4
(16.5)
1.6
1.7
1.9
(28.6)
2.0
(32.0)
2.1
2.2
(39.6)
0.7
11.7
8.7
4.0
1.0
1.2
1.4
1.7
1.9
2.2
(28.7)
2.7
2.9
3.2
(29.5)
34.0
31.6
24.1
14.3
3.6
3.4
(33.3)
33.9
31.6
30.8
19.0
11.1
1.4
(26.1)
14.1
14.1
14.1
14.1
13.6
13.6
10.1
6.1
2.4
3.6
(36.8)
33.9
32.8
31.7
25.3
15.2
6.7
3.8
(41.0)
Model
484X
3/4" Threads
Motive
Water
Flow
Suction
GPM
GPH
1.2
23.5
16.7
11.9
7.4
(3.5)
18.8
14.0
6.1
2.8
1.7
29.8
23.1
11.9
3.8
(7.5)
18.8
11.4
8.3
1.0
2.1
38.7
21.0
15.7
(9.6)
18.0
15.7
9.5
7.8
1.0
17.9
17.3
13.8
7.4
1.0
17.2
17.0
16.6
11.3
7.1
(25.5)
33.8
29.1
19.2
10.7
(22.8)
2.1
2.1
(21.6)
33.9
24.7
17.3
7.0
(20.8)
2.0
1.7
(17.0)
33.1
22.4
11.2
(18.0)
14.5
14.5
14.5
13.7
9.4
3.0
14.2
14.2
14.0
14.0
12.6
7.5
2.0
13.7
13.8
13.8
13.7
13.8
12.2
6.1
1.2
14.6
10.5
6.7
1.0
(12.5)
29.7
17.2
3.0
(15.0)
14.2
14.4
13.9
10.7
4.5
484
(8.4)
27.8
11.7
4.2
(12.4)
1.6
Model
1/2" & 3/4" Threads
Motive
Water
Flow
Suction
GPM
GPH
(4.4)
17.5
13.6
2.0
(9.6)
13.1
13.2
9.3
6.4
2.5
14.2
14.3
12.7
6.7
(36.1)
8.3
8.3
8.3
8.0
5.9
4.5
3.0
1.2
384X
1/2" Threads
Motive
Water
Flow
Suction
GPM
GPH
(6.6)
13.4
11.4
8.5
4.9
(25.2)
8.1
8.0
6.8
5.0
3.0
1.1
8.1
8.1
7.4
6.3
4.3
2.7
0.3
8.1
8.1
8.1
6.9
5.5
4.0
2.4
Model
(2.9)
15.3
11.5
7.6
2.1
(20.5)
8.0
7.9
5.6
3.6
1.7
(35.0)
6.0
6.0
6.0
5.7
4.7
3.5
2.1
0.7
0.7
10.3
8.7
7.5
5.1
(12.9)
7.0
6.1
3.4
1.9
0.5
7.8
6.9
4.4
2.3
(24.5)
6.0
6.0
4.8
3.4
1.7
0.6
6.0
6.0
5.5
4.2
2.6
1.2
(29.5)
0.46
0.51
384
1/2" Threads
Motive
Water
Flow
Suction
GPM
GPH
(8.2)
6.8
4.1
2.9
1.3
(19.5)
6.0
5.8
3.8
2.4
0.8
(22.5)
0.41
0.42
(16.0)
5.9
4.8
2.6
0.7
(18.5)
0.39
0.32
Model
(3.9)
6.2
4.8
1.9
0.8
(11.5)
5.8
3.7
2.0
0.6
(15.0)
0.35
0.29
5.2
2.6
1.8
1.2
(7.7)
5.4
2.7
1.7
(10.5)
0.32
287
1/2" Threads
Motive
Water
Flow
Suction
GPM
GPH
(3.5)
4.7
2.8
1.2
(7.0)
0.28
Model
2.4
39.5
27.7
13.4
8.4
(13.2)
2.7
39.6
32.1
22.0
9.9
(16.5)
2.9
39.8
38.1
28.8
17.0
(19.8)
17.3
17.4
17.4
17.4
11.1
4.0
17.1
17.7
17.7
17.7
15.2
11.4
4.0
17.2
17.2
17.5
17.5
16.7
13.9
10.3
3.7
17.4
17.4
17.7
17.7
17.7
16.5
12.7
7.8
3.2
40.3
39.3
33.9
24.3
14.8
(23.5)
3.4
40.8
38.7
38.5
29.9
20.7
6.5
(26.1)
3.6
41.4
39.1
37.9
35.0
26.9
18.2
(29.6)
3.8
(32.6)
** Numbers in parenthesis indicate the injector outlet pressure when suction stops (Zero Suction Point). **
41.7
40.5
39.2
37.4
29.5
20.3
8.2
Performance Table
Injector Performance Table
Water Suction Capacity • Injector Inlet Pressure 5-50 PSIG
Operating Pressure
PSIG
Injector
Inlet
5
10
15
20
25
30
35
40
45
50
Injector
Outlet
0
1
2
3
4
0
2
5
7
8
0
5
7
10
12
0
5
10
12
15
0
5
10
15
20
0
5
10
15
20
25
0
5
10
15
20
25
0
5
10
15
20
25
30
0
5
10
15
20
25
30
35
0
5
10
15
20
25
30
35
40
Model
584
1/2" & 3/4" Threads
Motive
Water
Flow
Suction
GPM
GPH
2.1
(4.4)
3.0
(9.0)
3.6
(13.5)
4.2
(18.0)
4.7
(22.0)
5.1
(27.0)
5.5
(31.5)
5.9
(35.5)
6.3
(40.0)
6.6
(45.0)
29.2
28.9
28.5
25.4
10.0
28.3
28.2
27.5
13.3
11.0
28.2
27.9
28.0
14.0
11.0
24.8
24.8
23.7
19.2
14.6
25.2
25.2
25.1
20.8
12.2
25.3
25.4
24.9
25.2
18.2
11.6
25.5
25.5
25.4
25.3
21.9
16.5
25.6
25.6
25.6
25.5
25.2
21.3
15.0
25.9
26.0
26.0
25.9
25.7
23.6
19.4
13.5
25.6
25.6
25.6
25.5
25.4
24.5
21.6
15.8
2.8
Model
684
3/4" Threads
Motive
Water
Flow
Suction
GPM
GPH
3.5
(4.3)
5.0
(8.5)
6.1
(13.0)
7.0
(16.5)
7.8
(21.0)
8.6
(26.0)
9.3
(29.5)
9.9
(35.0)
10.5
(37.5)
11.1
(42.0)
27.4
20.3
13.8
6.6
5.6
27.2
27.3
18.5
10.9
6.1
26.1
26.1
25.1
12.9
7.0
25.1
25.2
25.2
18.4
10.4
24.8
24.9
24.9
24.4
5.2
24.5
24.6
24.6
24.6
14.7
6.8
24.7
24.6
24.7
24.8
24.9
12.9
25.0
25.0
25.1
25.0
25.1
24.7
10.8
25.0
25.0
25.0
25.1
25.1
25.1
20.6
8.4
25.0
25.0
25.0
25.1
24.9
25.0
17.1
9.2
6.7
Model
878
1" Threads
Motive
Water
Flow
Suction
GPM
GPH
3.7
(4.0)
5.2
(8.7)
6.3
(12.5)
7.3
(16.5)
8.2
(21.0)
9.0
(26.1)
9.7
(30.1)
10.3
(34.4)
11.0
(38.4)
11.6
(42.3)
62.9
36.1
23.8
7.3
1.7
93.8
62.0
36.5
15.8
3.7
87.4
62.1
45.5
23.6
7.2
82.9
80.5
48.6
33.6
21.0
82.3
81.3
73.2
45.3
20.1
79.9
79.2
77.0
65.4
35.4
9.1
79.4
79.4
77.5
74.5
52.3
30.3
77.5
77.5
77.5
77.5
73.6
50.6
28.2
79.6
79.6
79.6
79.6
78.8
67.0
44.2
22.0
74.8
74.8
74.8
74.8
74.8
68.3
56.2
36.6
9.6
Model
885X
1" Threads
Motive
Water
Flow
Suction
GPM
GPH
3.6
78.1
62.6
42.7
15.5
(4.0)
5.0
(14.0)
8.0
(17.0)
8.7
(36.0)
11.0
12.2
13.4
14.5
15.5
(34.4)
140.9
139.7
139.2
134.8
112.1
74.5
23.2
(31.0)
11.3
9.5
(30.0)
141.0
141.1
139.1
128.0
90.5
36.9
(27.0)
10.7
7.7
(26.0)
142.4
141.7
135.7
106.7
54.2
(24.0)
10.1
5.5
(21.9)
144.1
140.7
125.3
69.3
14.3
(20.5)
9.4
135.8
84.5
53.3
(17.3)
142.7
135.8
96.5
38.4
16.4
(38.7)
139.6
140.5
140.5
139.1
128.1
106.8
59.0
12.9
1583A
101.5
46.4
22.2
2.7
(13.1)
141.9
117.4
57.7
36.2
Model
1.5" Threads
Motive
Water
Flow
Suction
GPM
GPH
(8.1)
135.3
83.2
58.0
19.2
(11.0)
7.1
1078
1" Threads
Motive
Water
Flow
Suction
GPM
GPH
(4.0)
115.9
90.8
44.8
19.4
(7.5)
6.2
Model
17.3
(43.9)
10.7
(4.4)
105.8
75.7
41.8
19.2
4.4
101.3
79.9
64.7
34.3
17.0
98.2
95.4
70.0
51.5
30.3
96.0
96.7
89.4
68.2
31.9
94.4
94.5
94.5
82.1
55.4
17.9
94.0
94.0
94.0
91.9
74.1
47.3
93.2
93.2
93.2
93.2
91.9
72.2
42.7
92.8
92.8
92.8
92.8
93.9
86.9
66.2
36.7
92.4
92.4
92.4
92.4
92.4
92.4
86.4
64.3
35.0
15.2
219.9
143.8
78.8
42.0
(8.6)
18.6
(13.0)
21.5
(17.9)
24.0
(22.1)
26.3
(26.0)
28.4
(29.4)
30.3
(33.4)
32.2
(37.5)
33.9
(41.9)
225.2
163.8
124.4
86.5
14.6
228.0
205.4
143.5
131.7
66.2
226.8
226.4
193.9
148.1
49.0
226.5
226.4
211.6
167.3
125.5
18.3
226.7
226.5
224.2
205.7
164.8
89.1
227.3
228.7
227.2
220.5
192.8
153.4
81.5
227.9
228.3
228.0
223.5
212.4
174.9
113.1
47.1
227.4
227.4
226.3
225.6
224.4
203.7
172.4
120.6
40.5
** Numbers in parenthesis indicate the injector outlet pressure when suction stops (Zero Suction Point). **
Performance Table
Injector Performance Table
Water Suction Capacity • Injector Inlet Pressure 5-50 PSIG
Operating Pressure
PSIG
Injector
Inlet
5
10
15
20
25
30
35
40
45
50
Injector
Outlet
0
1
2
3
4
0
2
5
7
8
0
5
7
10
12
0
5
10
12
15
0
5
10
15
20
0
5
10
15
20
25
0
5
10
15
20
25
0
5
10
15
20
25
30
0
5
10
15
20
25
30
35
0
5
10
15
20
25
30
35
40
Model
1585X
1.5" Threads
Motive
Water
Flow
Suction
GPM
GPH
10.7
123.5
74.8
26.3
(3.5)
15.2
(32.4)
46.8
50.0
(33.2)
326.0
324.1
318.1
287.2
210.2
106.9
(28.7)
33.9
43.3
(29.0)
324.3
321.3
307.8
257.1
146.6
11.9
(25.5)
32.2
39.6
(25.6)
326.3
318.1
286.7
204.1
66.7
(22.4)
30.3
35.4
(22.1)
323.1
299.7
251.2
137.5
(19.3)
28.4
30.7
(17.0)
324.6
275.5
204.5
50.5
(15.4)
26.3
25.0
(13.5)
308.6
231.9
120.2
39.3
(12.7)
24.0
17.7
(8.7)
262.0
157.7
86.6
(9.4)
21.5
1587
1.5" Threads
Motive
Water
Flow
Suction
GPM
GPH
244.3
102.9
91.5
54.2
(4.1)
241.5
155.9
43.4
(6.5)
18.6
Model
53.1
(38.3)
323.0
319.3
315.5
296.7
251.8
156.8
45.4
56.0
(41.0)
Model
34
(4.5)
269.7
249.1
103.7
58.3
14.4
270.6
184.7
154.2
98.6
38.0
267.1
265.7
174.6
142.0
88.0
265.2
264.9
229.6
156.8
55.1
263.5
261.5
268.3
200.4
164.8
33.4
285.7
284.7
287.7
251.8
191.7
143.8
287.0
284.9
282.6
278.4
244.5
180.3
115.5
259.8
259.2
260.4
257.1
256.9
225.9
157.1
73.5
260.5
259.7
259.7
258.3
257.3
252.4
205.4
137.2
75.1
2081
2" Threads
Motive
Water
Flow
Suction
GPM
GPH
48
(9.0)
59
(13.3)
68
(17.5)
77
(22.3)
84
(26.0)
91
(30.5)
97
(33.5)
103
(38.0)
108
(41.5)
630
630
630
215
136
630
630
468
149
30
631
623
576
213
77
631
631
468
299
152
631
631
627
404
134
631
631
631
511
341
62
631
631
631
627
460
256
631
631
631
631
524
394
169
631
631
631
631
607
508
341
149
631
631
631
631
631
588
453
300
115
Model
2083X
2" Threads
Motive
Water
Flow
Suction
GPM
GPH
8.4
456
158
(1.4)
13.1
Model
76
108
16.1
132
(3.7)
(13.5)
757
237
(5.7)
153
(17.0)
812
429
(7.1)
171
(21.5)
849
780
23.1
187
(8.8)
24.4
(10.4)
26.4
202
(29.5)
897
920
389
(11.6)
216
(32.5)
948
749
486
27.7
229
(13.4)
28.6
242
(14.4)
(40.5)
170
214
251
(13.1)
272
(17.5)
307
(21.7)
332
(26.0)
1290
1290
1266
1266
906
396
1254
1254
1254
1254
1110
714
228
1260
1260
1260
1260
1200
960
582
(36.0)
1175
1278
579
4091
4" Threads
Motive
Water
Flow
Suction
GPM
GPH
(8.8)
1434
1428
1044
552
300
1416
1416
1170
792
432
1344
1344
1356
930
114
1308
1308
1308
1284
576
(25.5)
853
670
288
Model
(4.5)
1446
1446
870
396
(8.5)
671
21.8
1050
900
756
456
(4.0)
561
154
(2.4)
18.9
3090
3" Threads
Motive
Water
Flow
Suction
GPM
GPH
360
(30.5)
382
(35.0)
402
(38.9)
1236
1236
1236
1236
1236
1194
882
498
416
(43.1)
** Numbers in parenthesis indicate the injector outlet pressure when suction stops (Zero Suction Point). **
2100
1500
1200
840
360
2820
2820
1860
780
240
2820
2820
2280
720
360
2820
2820
2700
1800
720
2820
2820
2820
1980
420
2820
2820
2820
2580
1380
240
2820
2820
2820
2820
2640
1440
2820
2820
2820
2820
2820
1860
900
2820
2820
2820
2820
2820
2820
2400
960
2820
2820
2820
2820
2820
2820
2640
1620
360
Performance Table – metric
Injector Performance Table
Operating Pressure
Kg/cm2
Injector
Inlet
0.35
0.70
1.05
1.41
1.76
2.11
2.46
2.81
3.16
3.52
Injector
Outlet
0.00
0.07
0.14
0.21
0.28
0.00
0.14
0.35
0.49
0.56
0.00
0.35
0.49
0.70
0.84
0.00
0.35
0.70
0.84
1.05
0.00
0.35
0.70
1.05
1.41
0.00
0.35
0.70
1.05
1.41
1.76
0.00
0.35
0.70
1.05
1.41
1.76
0.00
0.35
0.70
1.05
1.41
1.76
2.11
0.00
0.35
0.70
1.05
1.41
1.76
2.11
2.46
0.00
0.35
0.70
1.05
1.41
1.76
2.11
2.46
2.81
Water Suction Capacity • Injector Inlet Pressure 0.35-3.52 Kg/cm2
Model 283
Model 287
Model 384
Model 384X
Model 484
1/2" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
0.64
0.20
0.13
0.07
(0.25)
0.91
(1.83)
1.63
(2.60)
2.65
(1.90)
2.84
(2.18)
0.38
0.38
0.37
0.31
0.21
0.17
0.06
(2.36)
1.82
2.46
3.07
3.22
(2.74)
5.37
(1.16)
6.02
6.59
7.12
(2.01)
7.61
(2.25)
8.06
8.48
(2.78)
4.66
5.37
6.59
7.12
8.48
(2.02)
11.05
11.96
(2.07)
2.14
1.99
1.52
0.90
0.22
12.76
(2.34)
2.14
2.00
1.94
1.20
0.70
0.09
(1.84)
0.89
0.89
0.89
0.89
0.86
0.86
0.64
0.38
10.11
13.55
(2.59)
2.14
2.07
2.00
1.60
0.96
0.42
14.27
(2.88)
484X
3/4" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
4.50
1.48
1.05
0.75
0.46
6.40
1.88
1.46
0.75
0.24
(0.53)
1.18
0.72
0.52
0.06
7.83
2.44
1.32
0.99
(0.68)
1.14
0.99
0.60
0.49
0.06
1.13
1.09
0.87
0.47
0.06
1.09
1.08
1.05
0.71
0.45
(1.79)
2.13
1.83
1.21
0.68
(1.60)
8.06
9.01
(1.52)
2.14
1.56
1.09
0.44
(1.46)
7.61
7.83
(1.20)
2.09
1.41
0.71
(1.27)
0.91
0.91
0.91
0.87
0.59
0.19
0.89
0.89
0.88
0.88
0.80
0.47
0.13
0.87
0.87
0.87
0.87
0.87
0.77
0.39
6.40
Model
(0.25)
1.18
0.88
0.38
0.18
(0.88)
1.87
1.08
0.19
(0.87)
6.02
4.50
0.92
0.66
0.42
0.06
(0.59)
1.75
0.74
0.26
(1.06)
0.90
0.91
0.88
0.68
0.29
(2.54)
0.52
0.52
0.52
0.50
0.37
0.28
0.19
0.08
3.79
1/2" & 3/4" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
(0.31)
1.11
0.86
(0.68)
0.82
0.83
0.58
0.40
0.16
0.89
0.90
0.80
0.42
(1.77)
0.51
0.50
0.43
0.32
0.19
0.07
0.51
0.51
0.47
0.40
0.27
0.17
0.02
0.51
0.51
0.51
0.44
0.35
0.25
0.15
(2.46)
0.38
0.38
0.38
0.36
0.30
0.22
0.13
0.04
4.66
2.69
0.74
0.55
0.25
(0.46)
0.84
0.72
0.53
0.31
(1.44)
0.50
0.50
0.35
0.23
0.11
(1.72)
0.38
0.38
0.30
0.21
0.11
0.04
0.38
0.38
0.35
0.26
0.16
0.08
(2.07)
1.74
2.20
3.79
1/2" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
(0.20)
0.97
0.73
0.48
0.13
(0.91)
0.44
0.38
0.21
0.12
0.03
0.49
0.44
0.28
0.15
(1.37)
0.38
0.37
0.24
0.15
0.05
(1.58)
1.55
1.93
(1.13)
0.37
0.30
0.16
0.04
(1.30)
1.48
1.59
2.69
0.65
0.55
0.47
0.32
(0.58)
0.43
0.26
0.18
0.08
(0.81)
0.37
0.23
0.13
0.04
(1.06)
1.32
1.21
1/2" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
(0.27)
0.39
0.30
0.12
0.05
(0.54)
0.34
0.17
0.11
(0.74)
1.21
1.10
0.33
0.16
0.11
0.08
(0.25)
0.30
0.18
0.08
(0.49)
1.06
1/2" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
9.01
2.49
1.74
0.84
0.53
(0.93)
10.11
2.50
2.03
1.39
0.63
(1.16)
11.05
2.51
2.41
1.82
1.07
(1.39)
1.09
1.10
1.10
1.10
0.70
0.25
1.08
1.12
1.12
1.12
0.96
0.72
0.25
1.09
1.09
1.10
1.10
1.05
0.87
0.65
0.23
1.10
1.10
1.12
1.12
1.12
1.04
0.80
0.49
11.96
2.54
2.48
2.14
1.53
0.93
(1.65)
12.76
2.57
2.44
2.43
1.89
1.31
0.41
(1.84)
13.55
2.61
2.46
2.39
2.21
1.70
1.15
(2.08)
14.27
(2.29)
** Numbers in parenthesis indicate the injector outlet pressure when suction stops (Zero Suction Point). **
2.63
2.55
2.47
2.36
1.86
1.28
0.52
Performance Table – metric
Injector Performance Table
Operating Pressure
Kg/cm2
Injector
Inlet
0.35
0.70
1.05
1.41
1.76
2.11
2.46
2.81
3.16
3.52
Injector
Outlet
0.00
0.07
0.14
0.21
0.28
0.00
0.14
0.35
0.49
0.56
0.00
0.35
0.49
0.70
0.84
0.00
0.35
0.70
0.84
1.05
0.00
0.35
0.70
1.05
1.41
0.00
0.35
0.70
1.05
1.41
1.76
0.00
0.35
0.70
1.05
1.41
1.76
0.00
0.35
0.70
1.05
1.41
1.76
2.11
0.00
0.35
0.70
1.05
1.41
1.76
2.11
2.46
0.00
0.35
0.70
1.05
1.41
1.76
2.11
2.46
2.81
Water Suction Capacity • Injector Inlet Pressure 0.35-3.52 Kg/cm2
Model 584
Model 684
Model 878
Model 885X
Model 1078
1/2" & 3/4" Threads
Motive
Flow
l/min.
7.91
(0.31)
11.20
(0.63)
13.70
(0.95)
15.82
(1.27)
17.68
(1.55)
19.38
(1.90)
20.93
(2.22)
22.37
(2.50)
23.73
(2.81)
25.02
(3.16)
Water
Suction
l/min.
1.84
1.82
1.80
1.60
0.63
1.78
1.78
1.73
0.84
0.69
1.78
1.76
1.77
0.88
0.70
1.57
1.57
1.50
1.21
0.92
1.59
1.59
1.59
1.31
0.77
1.60
1.60
1.57
1.59
1.15
0.73
1.61
1.61
1.60
1.59
1.38
1.04
1.62
1.61
1.62
1.61
1.59
1.35
0.95
1.63
1.64
1.64
1.63
1.62
1.49
1.22
0.85
1.61
1.61
1.61
1.61
1.60
1.54
1.36
0.99
0.18
3/4" Threads
Motive
Flow
l/min.
13.25
(0.30)
18.77
(0.60)
22.97
(0.91)
26.53
(1.16)
29.67
(1.48)
32.48
(1.83)
35.09
(2.07)
37.51
(2.46)
39.78
(2.64)
41.94
(2.95)
Water
Suction
l/min.
1.73
1.28
0.87
0.42
0.35
1.72
1.72
1.17
0.69
0.38
1.65
1.65
1.58
0.81
0.44
1.59
1.59
1.59
1.16
0.66
1.57
1.57
1.57
1.54
0.33
1.55
1.55
1.55
1.55
0.93
0.43
1.56
1.55
1.56
1.56
1.57
0.82
1.57
1.58
1.59
1.58
1.58
1.56
0.68
1.58
1.58
1.58
1.58
1.58
1.59
1.30
0.53
1.58
1.58
1.58
1.58
1.57
1.57
1.08
0.58
0.42
1" Threads
Motive
Flow
l/min.
13.82
(0.28)
19.57
(0.61)
23.96
(0.88)
27.67
(1.16)
30.92
(1.48)
33.88
Water
Suction
l/min.
3.97
2.28
1.50
0.46
0.11
5.92
3.91
2.30
1.00
0.23
5.51
3.92
2.87
1.49
0.45
5.23
5.08
3.07
2.12
1.33
5.19
5.13
4.62
2.86
1.27
5.04
5.00
4.86
4.12
2.23
(1.84)
36.56
(2.12)
39.10
(2.42)
41.48
(2.70)
43.72
(2.97)
1" Threads
Motive
Flow
l/min.
Water
Suction
l/min.
13.47
4.92
3.95
2.69
0.98
(0.28)
19.08
35.69
(2.53)
50.76
54.84
58.63
(2.42)
8.89
8.81
8.78
8.51
7.07
4.70
1.46
(2.18)
42.66
46.33
(2.11)
8.89
8.90
8.77
8.08
5.71
2.33
(1.90)
40.46
41.45
(1.83)
8.98
8.94
8.56
6.73
3.42
(1.69)
38.15
35.88
(1.54)
9.09
8.88
7.90
4.37
0.91
(1.44)
5.01
5.01
4.89
4.70
3.30
1.91
4.89
4.89
4.89
4.89
4.64
3.19
1.78
5.02
5.02
5.02
5.02
4.97
4.23
2.79
1.39
4.72
4.72
4.72
4.72
4.72
4.31
3.54
2.31
0.60
29.30
(1.22)
9.00
8.56
6.09
2.42
(1.20)
33.04
20.74
6.40
2.93
1.40
0.17
(0.92)
8.95
7.40
3.64
2.28
(0.98)
30.17
Water
Suction
l/min.
(0.57)
8.54
5.25
3.66
1.21
(0.77)
26.99
Motive
Flow
l/min.
(0.28)
7.31
5.73
2.82
1.22
(0.53)
23.35
1" Threads
62.19
(2.72)
8.81
8.86
8.86
8.77
8.08
6.73
3.72
0.82
65.56
(3.09)
Model
1583A
1.5" Threads
Motive
Flow
l/min.
Water
Suction
l/min.
40.6
8.57
5.33
3.36
(0.31)
6.67
4.78
2.64
1.21
0.28
6.39
5.04
4.08
2.16
1.07
6.20
6.02
4.42
3.25
1.91
6.05
6.10
5.64
4.30
2.01
5.95
5.96
5.96
5.18
3.50
1.13
5.93
5.93
5.93
5.80
4.68
2.98
5.88
5.88
5.88
5.88
5.79
4.56
2.69
5.86
5.86
5.86
5.86
5.92
5.48
4.18
2.32
5.83
5.83
5.83
5.83
5.83
5.83
5.45
4.06
2.21
57.4
13.87
9.07
4.97
2.65
(0.61)
70.3
(0.91)
81.2
(1.26)
90.8
(1.55)
99.5
(1.83)
107.4
(2.07)
114.8
(2.35)
121.8
(2.64)
128.4
(2.95)
** Numbers in parenthesis indicate the injector outlet pressure when suction stops (Zero Suction Point). **
14.21
10.33
7.85
5.46
0.92
14.39
12.96
9.06
8.31
4.18
14.31
14.28
12.23
9.34
3.09
14.29
14.28
13.35
10.55
7.92
1.15
14.30
14.29
14.14
12.98
10.40
5.62
14.34
14.43
14.33
13.91
12.17
9.68
5.14
14.38
14.40
14.38
14.10
13.40
11.03
7.13
2.97
14.35
14.35
14.28
14.23
14.16
12.85
10.88
7.61
2.55
Performance Table – metric
Injector Performance Table
Water Suction Capacity • Injector Inlet Pressure 0.35-3.52 Kg/cm2
Operating Pressure
Kg/cm2
Injector
Inlet
0.35
0.70
1.05
1.41
1.76
2.11
2.46
2.81
3.16
3.52
Injector
Outlet
0.00
0.07
0.14
0.21
0.28
0.00
0.14
0.35
0.49
0.56
0.00
0.35
0.49
0.70
0.84
0.00
0.35
0.70
0.84
1.05
0.00
0.35
0.70
1.05
1.41
0.00
0.35
0.70
1.05
1.41
1.76
0.00
0.35
0.70
1.05
1.41
1.76
0.00
0.35
0.70
1.05
1.41
1.76
2.11
0.00
0.35
0.70
1.05
1.41
1.76
2.11
2.46
0.00
0.35
0.70
1.05
1.41
1.76
2.11
2.46
2.81
Model
1585X
1.5" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
40.6
7.8
4.7
1.7
15.2
9.8
2.7
16.5
10.0
5.5
(0.66)
81.2
(2.28)
177.2
189.4
(2.33)
20.6
20.4
20.1
18.1
13.3
6.7
(2.02)
128.4
164.0
(2.04)
20.5
20.3
19.4
16.2
9.2
0.8
(1.79)
121.8
149.7
(1.80)
20.6
20.1
18.1
12.9
4.2
(1.58)
114.8
134.0
(1.55)
20.4
18.9
15.8
8.7
(1.36)
107.4
116.0
(1.20)
20.5
17.4
12.9
3.2
(1.08)
99.5
94.7
(0.95)
19.5
14.6
7.6
2.5
(0.89)
90.8
67.0
(0.61)
(0.46)
70.3
1587
1.5" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
15.4
6.5
5.8
3.4
(0.29)
(0.25)
57.4
Model
200.9
(2.69)
20.4
20.1
19.9
18.7
15.9
9.9
2.9
211.8
(2.88)
Model
130
(0.32)
17.0
15.7
6.5
3.7
0.9
17.1
11.7
9.7
6.2
2.4
16.8
16.8
11.0
9.0
5.5
16.7
16.7
14.5
9.9
3.5
16.6
16.5
16.9
12.6
10.4
2.1
18.0
18.0
18.1
15.9
12.1
9.1
18.1
18.0
17.8
17.6
15.4
11.4
7.3
16.4
16.4
16.4
16.2
16.2
14.3
9.9
4.6
16.4
16.4
16.4
16.3
16.2
15.9
13.0
8.7
4.7
2081
2" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
183
(0.63)
224
(0.94)
259
(1.23)
290
(1.57)
317
(1.83)
343
(2.14)
366
(2.36)
389
(2.67)
410
(2.92)
39.7
39.7
39.7
13.5
8.6
39.7
39.7
29.5
9.4
1.9
39.8
39.3
36.4
13.4
4.8
39.8
39.8
29.5
18.8
9.6
39.8
39.8
39.5
25.5
8.5
39.8
39.8
39.8
32.3
21.5
3.9
39.8
39.8
39.8
39.5
29.0
16.1
39.8
39.8
39.8
39.8
33.0
24.9
10.7
39.8
39.8
39.8
39.8
38.3
32.0
21.5
9.4
39.8
39.8
39.8
39.8
39.8
37.1
28.6
18.9
7.3
Model
2083X
2" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
31.8
28.8
10.0
35.4
9.7
288
409
42.4
60.9
500
(0.26)
(0.95)
47.8
14.9
(0.40)
82.5
579
(1.20)
51.2
27.1
(0.50)
647
(1.51)
53.6
49.2
87.4
708
(0.62)
92.4
765
(2.07)
56.6
58.0
24.5
(0.82)
818
(2.29)
59.8
47.2
30.6
104.8
867
(0.94)
108.3
916
(1.01)
(2.85)
4091
4" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
643
810
(0.62)
90.5
90.1
65.9
34.8
18.9
89.3
89.3
73.8
50.0
27.3
84.8
84.8
85.5
58.7
7.2
82.5
82.5
82.5
81.0
36.3
950
(0.92)
1030
(1.23)
1162
(1.53)
1257
(1.83)
81.4
81.4
79.9
79.9
57.2
25.0
79.1
79.1
79.1
79.1
70.0
45.0
14.4
79.5
79.5
79.5
79.5
75.7
60.6
36.7
(2.53)
74.1
80.6
36.5
Model
(0.32)
91.2
91.2
54.9
25.0
(1.79)
53.8
42.3
18.2
(0.73)
99.9
66.2
56.8
47.7
28.8
(0.60)
(0.17)
71.5
3090
3" Threads
Motive
Water
Flow
Suction
l/min.
l/min.
(0.28)
(0.10)
49.6
Model
1363
(2.14)
1446
(2.46)
1522
(2.74)
78.0
78.0
78.0
78.0
78.0
75.3
55.6
31.4
1575
(3.03)
** Numbers in parenthesis indicate the injector outlet pressure when suction stops (Zero Suction Point). **
132.5
94.6
75.7
53.0
22.7
177.9
177.9
117.3
49.2
15.1
177.9
177.9
143.8
45.4
22.7
177.9
177.9
170.3
113.6
45.4
177.9
177.9
177.9
124.9
26.5
177.9
177.9
177.9
162.8
87.1
15.1
177.9
177.9
177.9
177.9
166.5
90.8
177.9
177.9
177.9
177.9
177.9
117.3
56.8
177.9
177.9
177.9
177.9
177.9
177.9
151.4
60.6
177.9
177.9
177.9
177.9
177.9
177.9
166.5
102.2
22.7
Emission Devices
Micro VI PC
Emitters
Aqua-Traxx PC
Irrigation Controllers
Jr Max
MC E
Total Control
600 Series Valve
Sentinel Valve
Control Valves
700 Series Valve
©2012 The Toro Company
Micro-Irrigation Business
1588 N. Marshall Avenue, El Cajon, CA 92020-1523, USA
Tel: +1 (800) 333-8125 or +1 (619) 562-2950
Fax: +1 (800) 892-1822 or +1 (619) 258-9973
toro.com
ALT032 08/08