Download TechniSat DigiBox VIACCESS User's Manual

bed_anl_DigiBox_Viaccess_englisch.qxd
13.08.01
11:42
Seite 44
Power supply:
Mains switch:
Power usage:
<26 W (in operation, horizontal polarisation, 400 mA supply to LNB)
<16 W (in operation, excluding LNB)
< 5 W (in standby mode)
Mains voltage:
230 V /50 Hz AC
General:
Ambient temperature
Humidity
Dimensions (WxDxH)
Weight
+ 15° C ….+ 35° C
< 80 %
305 mm x 135 mm x 65 mm
0.8 kg
10 Troubleshooting Guide
Problem
Possible Cause
Solution
No picture, no sound,
Display off
No power
Check power plug and cable
No picture, no sound,
Display on
Short circuit in LNB connection
Switch receiver off, repair short,
switch receiver on again
Defective or missing cable
connection
Check all cable connections
LNB defective
Replace LNB
Wrong external unit set on recei- Correct setting (see point 5.4)
ver
Dish positioned incorrectly
Picture shows intermittent blocks. Heavy rain or snow
May switch to still image, no
sound, at times screen black and Dish positioned incorrectly
note "No signal"
Dish too small for this location
Correct dish position
Clear dish of snow
Correct dish position
Use larger dish
Obstruction between dish and
satellite (e.g. tree)
Mount dish with uninterrupted
view
Sound OK, screen blue
Radio mode selected
Switch to TV mode
Sound OK, no picture
SCART connector not properly
Inserted
Check SCART connections
44