Download Sony CMT-CP500MD User's Manual
Transcript
CD Conserving power in standby mode Even if the system is off, the unit consumes power to power the clock and to stay responsive to commands from the remote. Power saving mode was introduced to reduce the amount of power consumed during standby. In this mode, the clock is not displayed. To change to power saving mode, press DISPLAY on the remote repeatedly while the system is off until demonstration mode and the clock disappear from the display. To change the display Press DISPLAY on the remote repeatedly while the system is off. The display changes as follows: Demonstration mode t Clock display t Power saving mode t Demonstration mode t… Tip The timer continues to operate during power saving mode. To cancel power saving mode Press DISPLAY on the remote repeatedly while the system is off until demonstration mode or the clock display appears in the display. 8 Loading the CD 1 Press CD EJECT Z. The disc tray slides out. 2 Load a CD onto the disc tray. Load with the label side up. When you play a CD single (8 cm CD), load it onto the inner circle of the tray. 3 Press CD EJECT Z again to close the disc tray. Notes • The disc cannot be viewed through the front window when a CD single (8 cm CD) is loaded. • The characters printed on the disc appear upside down when viewed through the front window. • If you press CD EJECT Z to open or close the disc tray while listening to another sound source, the CD icon lights even if there is no CD in the tray. To turn off the CD icon, press FUNCTION repeatedly to switch the function to CD. Tip You can stand a CD case upright in the groove on top of the system.