Download Sioux Tools 5055A User's Manual

Form # Z367A
Date 2-02/A
Model 5055N5055AM6
-
Mini Die Grinders
Right Angle Head
Operator Instructions
lmpofiant
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructionsin a safe
accessible place.
-
fncludes Foreseen Use, Work Stations, Putting Into Se,wice,
Operatina Disrnantlin~,Assembly and Safety Rules.
Product Type
Mini Die Grinders
Right Angle Head
-
RPM
Cvcies I%{ MI^
Sioux Tools, lnc.
117 Levi Drive
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765
Fax No. 828-835-9685
5055A 1/4"
5055AM6 6 mm
Product Net Weight
Recommended Use Of
Recommended Hose Bore
Recommended Max.
Balancer Or Support
Size - Minimbm
Hose Length
30 Ft
10 M
-
1-10 lbs
0.50 Kg
a
NO
I14 ins
Noise Level: Sound Pressure Level 93.0 dB(A)
Air Pressure
6.2
6.2
Recommendedworking
Maximum
8 rnm
Sound Power Level
90
90
bar
bar
PSI
PSI
104.0 dB(A)
Test Method: Tested in accordance with Pneurop
test code PN8NTCl and I S 0 Standard 3744
Personal Safety Equtpment
Use - Safety Gfasses
Use - Safety Gloves
Use - Safety Boots
Use - Breathing Masks
Use - Ear Protectors
YES
YES
YES
YES
1
a
@
@
A
Meters iSee2
Test Method: Tested in accordance with IS0
Always Wear Safety
Goggles
standards 8662 Parts 1 & 17
Wear Hearlng Protect~on
~
~
~ Ewsufe
~
Safety rules when using 5055Al
5055AM6 Die Grinders
- Use accessories rated at least 20,OOORPM.
- Prolonged exposure to vibration may cause injury.
~
~
g
e
d
- The tool is not electrically insulated. Never use the tool
if there is any chance of coming into contact with live
electricity.
Always when using the toot, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
to do so.
by persons t r a i n ~ d
Do not lock, tape, wire, etc. the 'On/OfY valve in 'On'
position. The triggerllever, etc. must always be free to
return to the 'Off' position when released.
-Always shut off the air supply to the tool and press the
-
-Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
Do not exceed the maximum working air pressure.
- Use persona[ protection equipment as recommended.
- Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction,
remove from use immediatelv and
All Pipe And Fittings
arrange for service and repair. If it is
Should Be 11T Or Large
not practical to remove tool from
service, then shut off the air supply
with Suflicient Capacity
to the toot and write or have written a
To Maintain Recommended
Working Pressure At
warning note and attach it to the tool.
- If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspension/support device.
- When operating the tool, always keep
the body and particularly the hands
away from the working attachment
Recommended Air Supply System
fixed to the tool.
Page No 1
-
2.5
Vibration Level
Always Read tnstruct+ons
Before Us~ngPower Twis
-
7
Figure 1