Download Seal-a-Meal VSWB3 User's Manual

VSWB3 05EM1 V.qxd
2/2/05
10:28 AM
Page 1
®
®
™
Vacuum Food Storage
Bottle Stoppers
Reference Guide
Preserves the taste of stored liquids!
®
®
™
www.seal-a-meal.com
©2005 The Rival Company
A Division of The Holmes Group, Inc.
RIVAL®, the RIVAL Logo®, Seal-a-Meal®, the Seal-a-Meal Logo™, Minute Marinating Canister™ and Air Out.
Freshness In.™ are trademarks of The Holmes Group, Inc. or its subsidiary.
MICROBAN® is a registered trademark of Microban Products Company.
Printed in China
VSWB3/9100060000441
VSWB305EM1
READ AND SAVE THESE INSTRUCTIONS
VSWB3
VSWB3 05EM1 V.qxd
2/2/05
10:28 AM
Page 3
START ENJOYING THE ADDITIONAL BENEFITS OF YOUR
SEAL-A-MEAL® VACUUM FOOD STORAGE SYSTEM WITH YOUR NEW
BOTTLE STOPPERS...
SEAL-A-MEAL® VACUUM FOOD STORAGE SYSTEM
No
more creative packaging to preserve the taste of stored liquids… with
one-touch operation it’s easy to lock out air and seal in freshness.
• Save Money – Reduce Waste
• Great for wine, salad dressing, oil vinegar and other non-carbonated
liquids
• Fits most standard glass bottles
Seal-a-Meal® Vacuum Food Storage Bottle Stoppers include:
• Three Bottle Stoppers
• Accessory Hose for use with all Seal-a-Meal® accessories
The Seal-a-Meal® Vacuum Food Storage System is a quick and easy way for
you to save time and money, while serving healthy food that tastes great!
Visit our fresh new website www.seal-a-meal.com to learn more about how
to fully enjoy the benefits of your new Seal-a-Meal® Vacuum Food Storage
System:
• New product information and special offers
• Helpful hints and tips
• Seal-a-Meal® recipes
• Purchase bags and accessories
A. Vacuum Storage Canister Set
B. Vacuum Bottle Stoppers
C. Minute Marinating Canister™
D. Bag Roll Holder and Cutter
E. Multi-layer Vacuum Storage Bags and Rolls
Look for these products at your local retailer or visit www.seal-a-meal.com.
KNOW YOUR SEAL-A-MEAL® BOTTLE STOPPERS
Accessory Hose
Bottle Stoppers
Accessory Port
-2-
-3-
VSWB3 05EM1 V.qxd
2/2/05
10:28 AM
Page 5
USING YOUR BOTTLE STOPPERS WITH A
SEAL-A-MEAL® VACUUM FOOD SEALER
Make sure you Seal-a-Meal® Vacuum Food Sealer is on a flat, dry surface
and follow instructions below to vacuum seal non-carbonated liquids.
1. Plug in the unit. Place Bottle Stopper in the neck of the bottle. Leave at least
1” between the bottle contents and the bottom of the Bottle Stopper.
2. Firmly insert male end of Accessory Hose into Accessory Port.
Accessory Port location will vary depending on the model of your Seala-Meal® Vacuum Food Sealer.
•
•
•
•
HELPFUL HINTS & TIPS
If your Bottle Stopper will not vacuum, make sure it fits snugly inside
the bottle. Air may be leaking if the Bottle Stopper seems loose in the
bottle neck.
Make sure there are no crumbs or food debris in the neck of the bottle,
any gaps will prevent a vacuum seal from forming.
Not for use with plastic containers or bottles.
CLEANING YOUR BOTTLE STOPPERS
Hand wash Bottle Stopper with warm soapy water, rinse well, and dry
thoroughly.
NOTE: DO NOT place in dishwasher.
(VS125 Series)
(VS105/120 Series)
(VS100/110 Series)
3. Attach other end of Accessory Hose to Seal-a-Meal® Bottle Stopper.
4. Press the Vacuum Button. Vacuum Indicator Light will turn on. Once
all of the air is removed, the Sealer and Indicator Light will
automatically turn off.
To stop the vacuum process at any time, press the Vacuum Button.
To release vacuum and remove Bottle Stopper, hold base of bottle and
slowly twist and pull up on Bottle Stopper.
Refer to your Seal-a-Meal® Vacuum Food Storage System Reference Guide
for more details on how to Vacuum Seal with Seal-a-Meal® Accessories.
-4-
-5-