Download Sanyo EP91G User's Manual

Power Supply ICs, LED Driver ICs
2008-6
For both analog and digital systems,
SANYO multifunction regulator IC products,
support our customers' creation of the new wave
of next generation in electronic products
by providing extensive functionality
and high reliability for all electronic devices.
Contemporary electronic equipment requires a wide range of high-level technologies to remain viable in today's
competitive market. For example, cell phones require technologies that achieve stable operation at low input
voltages, improved efficiency, and further miniaturization in the power supply system. Similarly, digital home
appliances not only requires low-power/low-voltage operation and improved efficiency, but also low power
consumption in standby mode to meet energy usage requirements and the ability to meet high-frequency radiation
standards.
We at SANYO Semiconductor makes a point of grasping these needs as early as possible and developing ICs
contributing to achieve improved system development and high level of integration based on our rich experience in
general-purpose product technologies.
* The outer dimensions in this brochure are only reference values (typical values). They may change without notice due to modifications or improvements.
At the time of product design or delivery, be sure to check with the delivery specifications or external dimension drawings of each device.
CONTENTS
♦Product Lineup
• DC-DC Converter (Control) ICs ------------------ 3
• DC-DC Converter (Control) ICs ------------------ 3
[Synchronous Rectification Type]
• AC-DC Converter (Control) ICs ------------------ 4
• Power Supply ICs -------------------------------- 4
for Single Lens Reflex Digital Cameras
• Power Supply ICs for Surveillance Cameras --- 4
• Power Supply ICs for Panels -------------------- 4
• System Power Supply ICs ----------------------- 5
(for Portable Electronic Devices)
• System Power Supply ICs ----------------------- 5
(for AV Electronic Devices)
1
• Series Power Supply ICs ----------------------- 6 to 9
• Power Supply Switching ICs ---------------------- 9
• Power ICs with a Watchdog Timer Function ----- 10
• Dual-Protection ICs -------------------------------- 10
• Dual-Protection ICs ---------------------------- 10, 11
(for Rechargeable Lithium-ion Batteries)
• Rechargeable Battery Charge Control ICs ------- 11
• Dedicated Reset Function ICs -------------------- 11
• LED Driver ICs -------------------------------------- 11
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard
application", intended for the use as general electronics equipment (home appliances, AV equipment, communication
device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any
"special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device,
burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high
level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm
to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications
outside the standard applications of our customer who is considering such use and/or outside the scope of our intended
standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the
performance, characteristics, and functions of the described products in the independent state, and are not guarantees of
the performance, characteristics, and functions of the described products as mounted in the customer' s products or
equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always
evaluate and test devices mounted in the customer' s products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values
that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters)
listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor
products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give
rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that
could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of
accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention
circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under
any of applicable local export control laws and regulations, such products may require the export license from the
authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written
consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to product/technology
improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd.
product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume
production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted with
regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO
Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights
which has resulted from the use of the technical information and products mentioned above.
2
Product Lineup
DC-DC Converter (Control) ICs
●: New products and
❈: Development
Type No.
Type
Output voltage
Channels
Power stages
LA5660M
Step up
Input voltage
1.8V to 14V
Programmable externally
1ch
External (NPN or NMOS)
MFP8(225mil)
Package
●
LV5803M
Step down
4.5V to 18V
Programmable externally
1ch
Built in
MFP8(225mil)
P
❈
LV5807MA
Step down
4.5V to 18V
Programmable externally
1ch
Built in
SOP8J(200mil)
LA5724M
Step down
4.5V to 28V
Programmable externally/0.6A
1ch
Built in
MFP8(225mil)
●
LA5744
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
220-5HK
●
LA5744MP
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
SMP5
●
LA5744TP
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
TP5HFA
●
LA5774
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
220-5H
12
●
LA5774MP
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
SMP5
12
●
LA5779
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
220-5H
12
●
LA5779MP
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
SMP5
12
●
LA5779N
Step down
4.5V to 28V
Programmable externally/3A
1ch
Built in
220-5HK
●
LA5734MP
Step down
4.5V to 32V
Programmable externally/3A
1ch
Built in
SMP5
●
LA5735M
Step down
4.5V to 32V
Programmable externally/0.6A
1ch
Built in
MFP8(225mil)
❈
LA5755
Step down
4.5V to 32V
Programmable externally
1ch
Built in
TO220
❈
LA5756
Step down
4.5V to 32V
Programmable externally
1ch
Built in
TO220
❈
LV5745GP
Step down
4.5V to 6V
Programmable externally
3ch
External (PMOS)
VCT28(3.0×3.0)
●
LV5781
Step down
4.5V to 6V
Programmable externally
1ch
Built in
HSSOP14(225mil)
LA5771MP
Step down
5.5V to 28V
3.3V/3A
1ch
Built in
SMP5
12
LA5771
Step down
5.5V to 32V
3.3V/3A
1ch
Built in
220-5H
12
LA5772MP
Step down
7V to 28V
5V/3A
1ch
Built in
SMP5
12
●
LA5772
Step down
7V to 32V
5V/3A
1ch
Built in
220-5H
12
Type No.
LA5680T
VCT24(3.5×3.5)
VCT24(3.5×3.5)
14
●
LV5609LP
V driver for CCD
Ratings are listed on separate datasheet
5ch
Built in
VCT24(3.5×3.5)
●
LV5609V
V driver for CCD
Ratings are listed on separate datasheet
5ch
Built in
SSOP20(225mil)
Step up/down
4V to 5.6V
5V/250mA
1ch
Built in
MFP14S(225mil)
LV5051T
Step up/down+
Linear regulator
1.5V to 4.4V
2V to 8.0V
2.5V (Step up/down)
2.8V/3.9A (Linear)
3ch
Built in
TSSOP24(225mil)
●
TN5D41A
Step down
10V to 40V
5V/5A
1ch
Built in (PMOS)
TO-220FI5H-HB
❈
TN8D41A
Step down
10V to 40V
5V/8A
1ch
Built in (PMOS)
TO-220FI5H-HB
14
●
TN5D51A
Step down
20V to 48V
12V/5A
1ch
Built in (PMOS)
TO-220FI5H-HB
14
❈
TN8D51A
Step down
20V to 48V
12V/8A
1ch
Built in (PMOS)
TO-220FI5H-HB
14
❈
TN5D61A
Step down
30V to 48V
24V/5A
1ch
Built in (PMOS)
TO-220FI5H-HB
14
●: New products and
❈: Development
DIP16(300mil)
3
Package
Built in
LA5664M
SSOP16(225mil)
Power stages
Built in
SSOP16(225mil)
External (NMOS)
Input voltage Output voltage Channels
2ch
External (PMOS)
1ch
Type
2ch
2ch
Programmable externally
Type No.
●: New products and
❈: Development
15V, -5.5V
Programmable externally
8V to 42V
Power Supply ICs for Surveillance Cameras
15V, -7.5V
8V to 33V
Step down
19
3V to 3.45V
Step down
LV5741
TQFP64J(7×7)
3V to 3.45V
LV5743V
❈
External
± Charge pump step-up
●
MSOP12(150mil)
Programmable 8ch
externally
(Step up 3, down 5)
± Charge pump step-up
MFP8(225mil)
External (NMOS)
3V to 15V
LV56081GP
Built in
External (NMOS)
18
LV5608LP
1ch
1ch
SSOP24(225mil)
❈
Programmable externally
1ch
External
●
8V to 28V
Programmable externally
Programmable 3ch
externally
(Step up 1, down 2)
SSOP30(275mil)
Step down
Programmable externally
3V to 15V
Built in
LV5808M
8V to 42V
17
2ch
❈
8V to 42V
TQFP48J(7×7)
Programmable
externally
SOP8J(200mil)
Step down
External
3V to 3.45V
Built in
Step down
Programmable 6ch
externally
(Step up 2, down 4)
± Charge pump step-up
1ch
LV5749V
3V to 15V
LV5606V
Programmable externally
LV5747TT
TSSOP36(275mil)
❈
8V to 28V
❈
External
VQLP32(4.0×4.0)
Step down
❈
Programmable
3ch
externally
Built in
LV5806MA
SSOP20(225mil)
1.8V to 11V
2ch
❈
External (NMOS)
TSSOP36(275mil)
Programmable
externally
12
1ch
External (NPN, PNP
or NMOS, PMOS)
3V to 3.45V
SMP5
Programmable externally
Programmable 3ch
externally
(Step up 1, down 2)
± Charge pump step-up
Built in
Step down
1.8V to 11V
LV5606LP
1ch
LV5050V
TSSOP36(275mil)
❈
5V/3A
●
External (NPN, PNP
or NMOS, PMOS)
MFP8(225mil)
8V to 28V
SSOP30(275mil)
Programmable 4ch
externally
(Step up 2, down 2)
Built in (External diode)
Step down
External (NMOS)
1.8V to 8V
1ch
LA5777MP
2ch
LV5604T
TQFP48J(7×7)
Programmable
externally
●
Programmable externally
●
P
1ch
Built in
MSOP10(150mil)
Power Supply ICs for Panels
Type No.
Type
P
1.5V to 12V
7.5V to 28V
12
Step down
LV5655
Package
Charge pump step-up
220-5H
LV5044V
❈
Power stages
External (NPN, PNP
or NMOS, PMOS)
LA5797M
SSOP20(225mil)
Built in
●
LV5603T
Channels
Programmable 6ch
externally
(Step up 4, down 2)
●
External (PMOS)
1ch
7.5V to 16V
4.5V to 6V
7.5V to 16V
4.5V to 6V
●
Input voltage Output voltage
16
●: New products and
❈: Development
13.5V to 28V
2ch
5V/3A
Package
30
Charge pump step-up
Programmable externally
Power stages
LA5679T
Type
Mixed step up/
step down
Mixed step up/
step down
Mixed step up/
step down
Multiple power
supply
Multiple power
supply
Multiple power
supply
Multiple power
supply
P
UVLO, primary side PbyPOCP,
secondary side timer type OCP
LA5795T
8V to 22V
8V to 28V
Channels
Features
VCC(V)
●
Step down
Step down
Output voltage
DIP8(300mil)
Functions
RCC/separately-excited fly-back AC-DC
converter controller
Programmable
externally
LA5777
Input voltage
LA5683T
12
LV5746V
Type
●
LA5669T
❈
Type No.
LA5648
Package
Power Supply ICs for Single Lens Reflex Digital Cameras
●
DC-DC Converter (Control) ICs [Synchronous Rectification Type]
Type No.
13
●
●
AC-DC Converter (Control) ICs
P
●: New products and
❈: Development
Input voltage Output voltage Channels Power stages
❈
LA5661M
Backlight inverter
1.8V to 14V
●
LA5663V
Phase control voltage inverter 4.5V to 23V
Package
Programmable
externally
1ch
External
MFP10S(225mil)
Programmable
externally (Current)
1ch
External
SSOP24(275mil)
P
15
4
System Power Supply ICs (for Portable Electronic Devices)
Regulator output voltage/current
Type No.
LA5160AM
LV5105FN
●
LV5103LP
1
5V/
100mA
2.8V/
150mA
1
1.5V/
30mA
5
3.3V/
150mA
2
2.6V/
100mA
2
2.85V/
200mA
6
1.5V/
200mA
3
2.85V/
50mA
3
2.85V/
150mA
7
1.8V/
150mA
4
3V/
50mA
4
3.1V/
450mA
8
1.2V/
500mA
●: New products
Series Power Supply ICs
Absolute maximum ratings
Input
voltage
(V)
Total power
dissipation
(W)
Package
40
0.8
MFP8(225mil)
5.9
0.44
3.2 to 4.5
VQFN48(7×7)
1.1*
VQLP40(5.0×5.0)
Functions/Features
P
Low consumption current at output-off time with
built-in ON/OFF function.
Built-in reset circuit × 2, 3-color LED driver, front
LED driver, and microphone bias output.
Type No.
LA5002M
Positive
0.06
voltage
LA5003
Positive
0.06
voltage
●
12
LA5003M
Positive
0.06
voltage
●
12
LA5004
Positive
0.06
voltage
●
12
LA5004M
Positive
0.06
voltage
●
12
LA5005
Positive
0.06
voltage
●
12
LA5005M
Positive
0.06
voltage
●
12
LA5006M
Positive
0.06
voltage
LA5008M
Positive
0.06
voltage
LA5009M
Positive
0.06
voltage
LA5010M
Positive
0.06
voltage
11.3V/0.3A ripple filter
switching regulator control
amplifier built in.
L88M05T
Positive
voltage
0.5
Built-in driver
L88M06T
Positive
voltage
0.5
L88M09T
Positive
voltage
0.5
L88M12T
Positive
voltage
0.5
Built-in step-down DC-DC converter × 1, series
regulator × 8, and short-circuit protection circuit
*Ratings mounted on board: 40mm×50mm×0.8mm,
Regulator output voltage/current
Type No.
LA5632
LA5643
LA5624H
LA5635H
LA5613
LA5601
LA5617
LA5605
LA5606N
5
2
3.3V/
60mA
3.5V/
150mA
1
5V/
50mA
6
8V/
100mA
11
OP1-C/
10mA
1
5V/
50mA
6
8V/
100mA
11
OP1-C/
10mA
3.3V/
150mA
5V/
1000mA
2
5.1V/
700mA
SW/
300mA
5.2V/
250mA
7.5V/
500mA
7.5V/
500mA
15.7V/
350mA
3.4V/
10mA
−7.5V/
−500mA
9V/
60mA
12V/
200mA
3
5V/
1000mA
5V/
100mA
3
8V/
10V/*
100mA
7
8
5V/
5V/
100mA 300mA
12
13
OP2-C/ OP3-C/
10mA
10mA
2
3
8V/
10V/*
200mA
7
8
5V/
5V/
100mA 300mA
12
13
OP2-C/ OP3-C/
10mA
10mA
5V/
10mA
9V/
150mA
4
5
5V/
100mA
Absolute maximum
ratings
Input Total power
voltage dissipation
(W)
(V)
14
14
4
8V/
30mA
9
SW/
100mA
14
OP4-C/
10mA
4
8V/
30mA
9
SW/
100mA
14
OP4-C/
10mA
5V/
500mA
12
●
Glass epoxy 4-layer (2S2P) board
System Power Supply ICs (for AV Electronic Devices)
1
Absolute
Output voltage (V)
maximum ratings
Output
Type Current
Input Total power Package
(A) 1.8 2 2.5 3 3.3 3.4 3.5 4 5 6 7 8 9 10 12 15 18 20 24 voltage dissipation
(V)
(W)
5
8V/
150mA
10
SW/
100mA
24
2.3
2.0
2.01
Functions/Features
Package
SIP12H
ON/OFF
function
Reset
output
●
●
SIP13H
HSOP28HC
(375mil)
P
Notes
With power ON/OFF
detection circuit.
●
●
●
10V regulator (when used
with external PNP transistor)
with standby function (on/off
control).
16
●
* Within ASO of external TR
5
8V/
150mA
10
SW/
500mA
24
2.01
HSOP28HC
(375mil)
●
●
10V regulator (when used
with external PNP transistor)
with standby function (on/off
control).
* Within ASO of external TR
14
1.7
SIP10F
●
15
1.0
DIP10S
(300mil)
●
±18
2.0
SIP10F
●
24
2.0
SIP13H
35
4.3
SIP14H
●
±Voltage tracking regulator
Built-in AC standby and
power detection functions.
●
16
●
16
●
16
●
18
●
18
●
18
●
●
18
Features
P
2V low-saturation voltage
regulator, 2V output voltage,
MFP8
0.3
60mA output current,
(225mil) low-saturation (0.2V typ) series
regulator, RF noise suppression
3V low-saturation voltage
regulator, 3V output voltage,
0.56 SIP4H 60mA output current,
low-saturation (0.2V typ) series
regulator, RF noise suppression
3V low-saturation voltage
MFP8
0.3
regulator, SOP (MFP)
(225mil) version of LA5003
4V low-saturation voltage
regulator, 4V output voltage,
0.56 SIP4H 60mA output current,
low-saturation (0.2V typ) series
regulator, RF noise suppression
4V low-saturation voltage
MFP8
0.3
regulator, SOP (MFP)
(225mil) version of LA5004
5V low-saturation voltage
regulator, 5V output voltage,
0.56 SIP4H 60mA output current,
low-saturation (0.2V typ) series
regulator, RF noise suppression
5V low-saturation voltage
MFP8
0.3
regulator, SOP (MFP)
(225mil) version of LA5005
6V low-saturation voltage
regulator, 6V output voltage,
MFP8
60mA output current,
0.3
(225mil) low-saturation (0.2V typ) series
regulator, RF noise suppression
8V low-saturation voltage
regulator, 8V output voltage,
MFP8
60mA output current,
0.3
(225mil) low-saturation (0.2V typ) series
regulator, RF noise suppression
9V low-saturation voltage
regulator, 9V output voltage,
MFP8
0.3
60mA output current,
(225mil) low-saturation (0.2V typ) series
regulator, RF noise suppression
10V low-saturation voltage
regulator, 10V output voltage,
MFP8
60mA output current,
0.3
(225mil) low-saturation (0.2V typ) series
regulator, RF noise suppression
5V low-saturation voltage regulator,
5V output voltage, 0.5A output current,
1.0 TP3H
0.4V (typ) minimum I/O voltage drop
6V low-saturation voltage regulator,
1.0 TP3H
6V output voltage, 0.5A output current,
0.4V (typ) minimum I/O voltage drop
9V low-saturation voltage regulator,
1.0 TP3H
9V output voltage, 0.5A output current,
0.4V (typ) minimum I/O voltage drop
12V low-saturation voltage regulator,
1.0 TP3H
12V output voltage, 0.5A output current,
0.4V (typ) minimum I/O voltage drop
Continued on next page.
6
Series Power Supply ICs
Series Power Supply ICs
Continued from preceding page.
Absolute
maximum ratings
Type No.
L88M33T
L88M35T
L88MS04T
L88MS05T
L88MS06T
Positive
voltage
Positive
voltage
Positive
voltage
Positive
voltage
Positive
voltage
L88MS08T
Positive
voltage
L88MS09T
Positive
voltage
L88MS12T
L88MS33T
L88MS34T
L88R05C
L88R05D
L88R05E
7
Output voltage (V)
Output
Type Current
Input Total power Package
(A) 1.8 2 2.5 3 3.3 3.4 3.5 4 5 6 7 8 9 10 12 15 18 20 24 voltage dissipation
(V)
(W)
Positive
voltage
Positive
voltage
Positive
voltage
Positive
voltage
Positive
voltage
Positive
voltage
0.5
18
●
0.5
18
●
0.5
18
●
0.5
0.5
1.0
1.0
18
●
0.5
1.0
18
●
0.5
0.5
18
●
0.5
0.5
18
●
●
18
18
●
18
●
●
●
●
18
18
18
1.0
1.0
Features
TP3H
3.3V low-saturation voltage
regulator, 3.3V output voltage,
0.5A output current, 0.4V (typ)
minimum I/O voltage drop
TP3H
3.5V low-saturation voltage
regulator, 3.5V output voltage,
0.5A output current, 0.4V (typ)
minimum I/O voltage drop
4V low-saturation voltage
regulator with strobe pin,
4V output voltage, 0.5A output
1.0 TP5H
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
5V low-saturation voltage
regulator with strobe pin,
1.0 TP5H
5V output voltage, 0.5A output
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
6V low-saturation voltage
regulator with strobe pin,
1.0 TP5H
6V output voltage, 0.5A output
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
8V low-saturation voltage
regulator with strobe pin,
1.0 TP5H
8V output voltage, 0.5A output
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
9V low-saturation voltage
regulator with strobe pin,
1.0 TP5H
9V output voltage, 0.5A output
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
12V low-saturation voltage
regulator with strobe pin,
1.0 TP5H
12V output voltage, 0.5A output
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
Low-saturation voltage regulator
with on/off function, 3.3V output
voltage, 0.5A output current,
1.0 TP5H
strobe pin, 0.4V (typ) minimum
I/O voltage drop
3.4V low-saturation voltage
regulator with strobe pin, 3.4V
output voltage, 0.5A output
1.0 TP5H
current, strobe pin, 0.4V (typ)
minimum I/O voltage drop
4.5V low-saturation voltage
regulator with reset pin,
2.75 220-5H 5V output voltage, 1A output
current, reset pin, 0.5V (typ)
minimum I/O voltage drop
4.2V low-saturation voltage
regulator with reset pin,
2.75 220-5H 5V output voltage, 1A output
current, reset pin, 0.5V (typ)
minimum I/O voltage drop
3.9V low-saturation voltage
regulator with reset pin,
2.75 220-5H 5V output voltage, 1A output
current, reset pin, 0.5V (typ)
minimum I/O voltage drop
P
Type No.
Absolute
Output voltage (V)
maximum ratings
Output
Type Current
Input Total power Package
(A) 1.8 2 2.5 3 3.3 3.4 3.5 4 5 6 7 8 9 10 12 15 18 20 24 voltage dissipation
(V)
(W)
L78LR05
Positive
0.15
voltage
●
25
1.0
TP5H
L78M05T
Positive
voltage
0.5
●
35
1.0
TP3H
L78M06T
Positive
voltage
0.5
35
1.0
TP3H
L78M07T
Positive
voltage
0.5
35
1.0
TP3H
L78M08T
Positive
voltage
0.5
35
1.0
TP3H
L78M09T
Positive
voltage
0.5
35
1.0
TP3H
L78M10T
Positive
voltage
0.5
35
1.0
TP3H
L78M12T
Positive
voltage
0.5
35
1.0
TP3H
L78M15T
Positive
voltage
0.5
35
1.0
TP3H
L78M18T
Positive
voltage
0.5
35
1.0
TP3H
L78M20T
Positive
voltage
0.5
35
1.0
TP3H
L78M24T
Positive
voltage
0.5
35
1.0
TP3H
L78MG
Positive
voltage
0.5
35
1.2
SIP4H
L780S05
Positive
voltage
1.0
35
1.75 220-5H
L780S08
Positive
voltage
1.0
35
1.75 220-5H
L780S09
Positive
voltage
1.0
35
1.75 220-5H
L780S10
Positive
voltage
1.0
35
1.75 220-5H
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Features
P
5V voltage regulator with reset
pin, 5V output voltage, 150mA
output current, reset pin
5V 0.5A 3-pin voltage regulators,
5V output voltage, 500mA output
current, 1.0W power dissipation
6V 0.5A 3-pin voltage regulators,
6V output voltage, 500mA output
current, 1.0W power dissipation
7V 0.5A 3-pin voltage regulators,
7V output voltage, 500mA output
current, 1.0W power dissipation
8V 0.5A 3-pin voltage regulators,
8V output voltage, 500mA output
current, 1.0W power dissipation
9V 0.5A 3-pin voltage regulators,
9V output voltage, 500mA output
current, 1.0W power dissipation
10V 0.5A 3-pin voltage regulators,
10V output voltage, 500mA output
current, 1.0W power dissipation
12V 0.5A 3-pin voltage regulators,
12V output voltage, 500mA output
current, 1.0W power dissipation
15V 0.5A 3-pin voltage regulators,
15V output voltage, 500mA output
current, 1.0W power dissipation
18V 0.5A 3-pin voltage regulators,
18V output voltage, 500mA output
current, 1.0W power dissipation
20V 0.5A 3-pin voltage regulators,
20V output voltage, 500mA output
current, 1.0W power dissipation
24V 0.5A 3-pin voltage regulators,
24V output voltage, 500mA output
current, 1.0W power dissipation
Variable type 4-pin 500mA
constant voltage power
supply, 35V/500mA, Pd: 1.2W
1A general-purpose voltage
regulator, 5V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
1A general-purpose voltage
regulator, 8V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
1A general-purpose voltage
regulator, 9V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
1A general-purpose voltage
regulator, 10V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
Continued on next page.
8
Series Power Supply ICs
Continued from preceding page.
Output
Type No.
Type Current
(A)
L780S12
L780S15
Positive
voltage
Positive
voltage
1.0
L78MR05
Positive
voltage
0.5
L78MR06
Positive
voltage
0.5
L78MR08
Positive
voltage
0.5
L78MR12
Positive
voltage
0.5
Positive
L78MS05JSMP
voltage
L79M05T
L79M06T
L79M08T
L79M09T
L79M10T
L79M12T
Negative
voltage
Negative
voltage
0.5
0.5
0.5
0.5
Negative
voltage
0.5
Negative
voltage
7
8
35
●
35
●
●
●
●
●
●
●
●
1.75 220-5H
1.75 220-5H
35
1.75 220-5H
35
1.75 220-5H
35
1.75 220-5H
35
1.75 220-5H
35
5V voltage regulator with strobe
pin, 5V output voltage, 0.5A output
1.75 220-5H
current, strobe pin (Features a low
quiescent current of 35μA)
35
5V voltage regulator with strobe
pin, 5V output voltage, 0.5A output
current, strobe pin (Features a low
quiescent current of 35μA)
-35
●
-35
●
0.5
-35
●
0.5
●
-35
2.0
1.0
1.0
1.0
1.0
1.0
1.0
SMP5
TP3H
TP3H
TP3H
TP3H
TP3H
TP3H
P
1A general-purpose voltage
regulator, 12V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
1A general-purpose voltage
regulator, 15V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
1A general-purpose voltage
regulator, 18V output voltage,
1A output current, strobe
pin, thermal protection and
overcurrent limiter circuits
5V voltage regulator with
reset pin, 5V output voltage,
0.5A output current
6V voltage regulator with
reset pin, 6V output voltage,
0.5A output current
8V voltage regulator with
reset pin, 8V output voltage,
0.5A output current
12V voltage regulator with
reset pin, 12V output voltage,
0.5A output current
1.75 220-5H
-35
●
Features
35
-35
●
0.5
Negative
voltage
Negative
voltage
6
1.0
L780S18
Positive
voltage
5
Input Total power Package
9 10 12 15 18 20 24 voltage dissipation
(V)
(W)
1.0
Positive
voltage
L78MS05J
1.8 2 2.5 3 3.3 3.4 3.5 4
Power ICs with a Watchdog Timer Function
Absolute
maximum ratings
Output voltage (V)
LV5621LP
9
Package
VCT16(2.6×2.6)
VCC1
Input voltage (V)
VCC2
VCC3
2.7 to 4.8
3
3.5 to 5.2
For DSCs and game machines
LV5622LP
VCT16(2.6×2.6)
2.7 to 4.8
3
3.5 to 5.2
For DSCs and game machines
LV5625V
SSOP16(225mil)
1.45 to 3.4
3
3.5 to 5.2
For DSCs and game machines
Function reset
logic output
Watchdog
5V
Regulator
Edge
Reset
time typ P
regulator output
detection
hold
(Ct=2μF)
control ON/OFF
LA5690D
41
0.5
DIP8(300mil)
Noninverted/Inverted
●
●
5ms
LA5690S
41
0.5
SIP9
Noninverted/Inverted
●
●
5ms
LA5691S
41
0.5
SIP9
Inverted
●
●
5ms
LA5692D
41
0.5
DIP8(300mil)
Inverted
●
●
●
40ms
LA5692M
41
0.37
MFP8(225mil)
Inverted
●
●
●
40ms
LA5692S
41
0.5
SIP9
Inverted
●
●
●
40ms
●
LA5693AM
41
0.37
MFP8(225mil)
Inverted
●
●
40ms
21
LA5693D
41
0.5
DIP8(300mil)
Inverted
●
●
40ms
21
LA5693M
41
0.5
MFP8(225mil)
Inverted
●
●
40ms
21
Type No.
LA5695M
Absolute maximum ratings
Total power
Input voltage
dissipation
(V)
(W)
18
0.4
Package
MFP14(225mil)
Functions/Features
Type No.
P
20
Absolute maximum ratings
Total power
Input voltage
dissipation
(V)
(W)
Package
P
Protection ICs for heating/cooling equipment and OA equipment, Builtin abnormal supply voltage detection circuit, driver output with built-in
output delay circuit, can be controlled from 8 input pins.
Dual-Protection ICs (for Rechargeable Lithium-ion Batteries)
-5V 3 pin voltage
regulator (minus output),
−5V/0.5A, Pd: 1.0W
-6V 3 pin voltage
regulator (minus output),
−6V/0.5A, Pd: 1.0W
-8V 3 pin voltage
regulator (minus output),
−8V/0.5A, Pd: 1.0W
-9V 3 pin voltage
regulator (minus output),
−9V/0.5A, Pd: 1.0W
-10V 3 pin voltage
regulator (minus output),
−10V/0.5A, Pd: 1.0W
-12V 3 pin voltage
regulator (minus output),
−12V/0.5A, Pd: 1.0W
Applications
Package
Dual-Protection ICs
Power Supply Switching ICs
Type No.
Type No.
Absolute
Total power
maximum ratings
dissipation
Input voltage
(W)
(V)
●: New products and
❈: Development
Functions/Features
●
LV5113T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
●
LV5122T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV51130T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
●
LV51131T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV51132T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV51133T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
●
LV51134T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV51135T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV51136T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
●
LV51137T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
●
LV51138T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV5125T
-0.3 to +12
0.17
MSOP8(150mil)
2-cell Lithium-ion rechargeable battery protection IC
❈
LV51110T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51110LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51111T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51111LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51112T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51112LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51113T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51113LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51114T
-0.3 to +7
0.35
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
P
Continued on next page.
10
DC-DC Converter (Control) ICs [Step down]
LA5734MP/71/71MP/72/72MP/
74/74MP/77/77MP/79/79MP
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51115T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51115LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51116T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51116LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51117T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51117LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51118T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51118LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51119T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51119LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
●
LV51140T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51140LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
●
LV51141T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51141LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51142T
-0.3 to +7
0.35
SOT-23-6
1-cell Lithium-ion rechargeable battery protection IC
❈
LV51142LF
-0.3 to +7
0.3
SON5(1.6×2.0)
1-cell Lithium-ion rechargeable battery protection IC
Rechargeable Battery Charge Control ICs
Type No.
❈
■ Functions/Features
● Low-ESR capacitor with increased reliability applicable
as the output smoothing capacitor (LA5774/74MP)
● High efficiency
● 4 external parts
● Built-in reference oscillator (160kHz)
● Built-in current limiter
● Built-in thermal shutdown circuit
● Built-in soft start circuit
(LA5771/71MP/72/72MP/74/74MP)
● ON/OFF function (LA5734/77/77MP/79/79MP)
Type
Step
down
Input voltage
• 4.5V to 28V
• 4.5V to 32V
• 5.5V to 28V
• 5.5V to 32V
• 7V to 28V
• 7V to 32V
• 8V to 28V
Package
Lithium-ion,
nickel-metal hydride
14.5
0.36
MFP10S(225mil)
LA5645M
Charger
14.5
0.3
MFP8(225mil)
LA5623M
Total power
dissipation
(W)
-0.3 to +12
0.3
0.45
4.5
8.4
SANYO: SMP5
SANYO: 220-5H
Channels Power stages
1ch
Package
• 220-5H
(LA5771/72/74/77/79)
• SMP5
(LA5734MP/71MP/72MP/
74MP/77MP/79MP)
Built in
❈: Development
Functions/Features
P
Car battery DC/DC converter control IC, output voltage propor22
tional to PWM input signal, for charging lithium-ion batteries
Constant-voltage, constant-current control IC, high precision
reference voltage (1.5V+1%), input offset voltage (2mV max.)
SWOUT
VIN
L1
68μH
OCP
OSC
Package
Functions/Features
23
D1
SBD
Reset
P
2-system reset IC with built-in 1.25V, and 4.2V reference voltages,
delay time 25ms, 50ms, 100ms, or 200ms switchable
Drive
C1
220μF
/35V
C2
1000μF
/6.3V
Comp.
TSD
R2
Amp.
LED Driver ICs
Type No.
0.8
1.7
5
• Programmable externally/3A
(LA5734MP/74/74PM/79/79MP)
• 3.3V/3A
(LA5771MP/71)
• 5V/3A
(LA5772MP/72/77/77MP)
Reg.
MFP8(225mil)
5
1
2.7
(1.6)
1
2.7
0.9
0.2
0.4
Output voltage
(LA5774/74MP/79/79MP)
(LA5734MP)
(LA5771MP)
(LA5771)
(LA5772MP)
(LA5772)
(LA5777/77MP)
Dedicated Reset Function ICs
Type No.
0.9
1.7
1.3
1.3
Example: LA5771 Block Diagram
LA5636M
Absolute
maximum ratings
Input voltage
(V)
(1.6)
4.5
4.5
Block Diagram
Absolute
Total power
maximum ratings
dissipation
Input voltage
(W)
(V)
Battery type
10.0
17.8
21.3
23.0
SON5(1.6×2.0)
15.0
0.3
10.4MAX
10.0
3.6
1.5
-0.3 to +7
unit: mm
1.2
LV51114LF
unit: mm
Separately-excited step-down switching regulator
9.9
❈
P
(8.8)
Functions/Features
2.7
■ Applications
Package
(8.8)
Type No.
Absolute maximum ratings
Total power
Input voltage
dissipation
(V)
(W)
●: New products and
❈: Development
Continued from preceding page.
4.5
Dual-Protection ICs (for Rechargeable Lithium-ion Batteries)
VOS
●: New products
Input voltage Channels
Package
Circuit functions and applications
P
LV5213LP
3.0 to 4.5
3ch
VCT16(2.6×2.6)
●
LV5215LF
3.0 to 4.5
4ch
VQFN12(2.0×2.0)
4-channel LED driver for cell phones
24
●
LV5217GP
3.0 to 4.5
3ch
VCT16(2.6×2.6)
3-channel LED driver for cell phones
25
VREF
R1
3-channel LED driver for cell phones
C3
1μF
/50V
SS
GND
* For other block diagrams, refer to the datasheet.
11
12
DC-DC Converter (Control) ICs [Step down]
DC-DC Converter (Control) ICs [Separately-excited step-down]
LV5803M
■ Applications
unit: mm
Type
■ Functions/Features
Step down
4.5V to 18V
1.27
0.15
1.7max
0.1
(1.5)
0.35
Power stages
Package
Built in
MFP8(225mil)
1ch
Type
1.6
2.4
0.9
0.5
1
2
3
4
5
1.27
0.7
3.81
2.54
1.27
2.75
2.54
SANYO: TO-220FI5H-HB
Input voltage
Output voltage
10V to 40V (TN8D41A/TN5D41A)
Step
20V to 48V (TN8D51A/TN5D51A)
down
30V to 48V (TN5D61A)
(5.9)
0.63
4
SANYO: MFP8(225mil)
Input voltage Output voltage Channels
Programmable
externally
● Large current : IO max 8A (TN8D41A/51A)
: IO max 5A (TN5D41A/51A/61A)
● High efficiency : Vertical-type P-channel power MOSFET built-in
● High withstand voltage : VIN max 57V
● Five external parts
● Built-in reference oscillator (150kHz)
● Built-in current limiter
● Built-in thermal shutdown circuit
● Built-in soft start circuit
● ON/OFF function (shared with soft start pin)
4.4
6.4
1
3.5
7.2
5
■ Functions/Features
(0.65)
2.8
16.0
8
4.5
3.2
Separately-excited step-down switching regulator
5.0
● 2A 1-channel step-down switching regulator
● Wide input dynamic range (4.5 to 18V)
: 90% IOUT=1A, VIN=12V, VO=5V
● High efficiency
● Compact package : MFP8
● Standby mode
● Overcurrent protection
● Thermal shutdown
: 330kHz
● Fixed frequency
● Reference voltage : 0.8V
● Soft start function
10.0
12.5
DC-DC converter
unit: mm
14.0
■ Applications
TN8D41A/51A, TN5D41A/51A/61A
5V/5A (TN5D41A),
12V/5A (TN5D51A),
24V/5A (TN5D61A)
Channels Power stages
5V/8A (TN8D41A),
12V/8A (TN8D51A),
1ch
Block Diagram
Built in
(PMOS)
Package
TO-220FI5H-HB
Block Diagram
BOOT(SW+Vreg.)
BOOT
C2=10μF/25V
VIN
Current sense
Amp
Rb=39
Pre-drive
1:N
VIN
C8=10μF/25V
L1=10μH
3
Under Voltage
Protect
Over
Temperature
Protect
SWOUT
VOUT
Over Current
Protect
SENSE
VOUT=3.3V
Pch MOSFET
OSC
330kHz
R1=27kΩ
Error Amp
PWM
comparator
FB
D1=SBM30-03
COMP
BOOT
Short
protect
C5=10μF/
10V X 3
Ro=open
SW
R10=4.3kΩ
R2=10kΩ
1
C1=0.022μF
UVLO
R3=10kΩ
VIN=12V
OUTPUT
+
GND
SW
-COMP
+
OSC
SS
5
SOFTSTART
circuit
C4=OPEN
Band Gap
C3=1500pF
COMP
Internal stable
supply
VIN
SS
Short
+
• C1, C8, C5 = Ceramic capacitor used.
• L1 = CDRH105RNP-100NC (sumida made)
--
protect
GND
circuit
C6=0.015μF
EN
Vref
0.8V
TSD
Internal
regulator
AMP
FB
2
4
+
Internal regulator
(5V)
open or H: ON
L:OFF
GND
13
GND
14
LV5050V
■ Applications
unit: mm
7.5V to 16V
4.5V to 6V
Programmable
externally
1ch
1.5max
0.1
(1.3)
4
6.4
1
1.4
1.0
3.9MAX
0.15
0.22
(0.33)
2.54
(0.76)
0.5
SANYO: SSOP20(225mil)
Input Voltage Output Voltage Channels
Step down
● RCC power supply controller
● Overcurrent detection function
● Soft start function
● Input UVLO circuit
● Output overcurrent protection timer function
● Base winding voltage detection function
10
0.65
5
(3.0)
0.5
1
8
■ Functions/Features
6.4
4.4
■ Functions/Features
● Step-down DC-DC converter controller with 1-channel
● Input UVLO circuit, overcurrent detection function,
soft start/soft stop function, start-up delay circuit
● Output voltage monitor function
(Under voltage protection with power good and timer
latch)
● Synchronized operation is possible between different
devices
9.14
11
3.2
20
unit: mm
RCC power supply controller
6.5
0.25
DC-DC converter
Type
LA5648
0.51MIN
■ Applications
AC-DC Converter (Control) ICs
SANYO: DIP8(300mil)
Power Stages
Package
Functions
VCC
External (NMOS)
SSOP20(225mil)
RCC/separately-excited fly-back AC-DC converter
controller
30
Features
Voltage
and
Current
generator
BG
BG
refrrence
IREF
Current
bias
Vref
0.8V
Input Power
Supply
4.2V
/ 3.8V
Np
VLIN5
5V REG
(Allways ON)
Internal
Bias
Nb
8.3μA
COMP
ILIM
Comp
ILIM
VCC
UVLO
1.2V Vref
CH1
Output
3.5V REG
RSNS
error amp
FB
PWM comp
Vref
0.87Vref
ISENSE
Amp
S Q
1.6V
SD
Corrective
ramp
SSEND
POR
2.4V
CONT1
PGOOD
CONT POR
DET COMP
PWM COMP
+
--
PGND
TRIANG OSC
TIMER
3.5V
SYC
+
COM
R Q
S Q
2.4V
UV_DELAY
Active
discharge
Rdson=
15Ω
+
OCL
LDRV
5μA
SSEND
LOGIC
CH1
Output
VDD
0 deg
UV
OUT
HDRV
Shoot through
protection
sequencer
SD
5μA
TD
CBOOT
SW
3.5μA
SS
Shifter
& latch
R Q
PWM logic
SKIP control
UV
15
DIP8(300mil)
Block Diagram
POR
Vref
Package
UVLO, primary side PbyPOCP,
secondary side timer type OCP
Block Diagram
VIN
7.62
DC-DC Converter (Control) ICs [Synchronous rectification type]
UV_timeout
0
deg
OSC
300kHz
CT
CF
CT
PC
PC
CLKO SGND
SYNC. pulse out
5V
0V
16
Power Supply ICs for Single Lens Reflex Digital Cameras
Power Supply ICs for Single Lens Reflex Digital Cameras
LV5603T
■ Applications
unit: mm
unit: mm
9.0
6-channel switching regulator control IC
36
25
6.5
24
13
12
0.125
0.2
0.5
0.5
4.4
● Low voltage (3V minimum) operation
● Reference voltage precision: ± 1%
● Built-in standby circuit
● Synchronous rectification: channels 1 and 2
● 3-channel independent soft start
13
1
0.5
0.15
0.22
(0.5)
0.1
0.1
1.2max
(1.0)
(0.75)
12
1
1.5max
48
■ Functions/Features
9.0
7.0
■ Functions/Features
6.4
24
37
● Low voltage (3V minimum) operation
● Reference voltage precision: ± 1%
● Independent standby function for each of the 6 channels
● Is capable of driving MOS transistors
● Synchronous rectification: channels 1 and 2
● Supports inverting step-up operation
3-channel switching regulator control IC
0.5
7.0
(1.3)
■ Applications
LV5655
SANYO: TQFP48J(7X7)
Type
Input voltage Output voltage
Multiple power
supply
Programmable
externally
3V to 15V
SANYO: SSOP24(225mil)
Channels
Power stages
Package
Type
6ch (Step up 2, down 4)
External
TQFP48J(7×7)
Multiple power
supply
Input voltage Output voltage
Programmable
externally
3V to 15V
Channels
Power stages
Package
3ch (Step up 1, down 2)
External
SSOP24(225mil)
Block Diagram
Block Diagram
to A
to B
to C
to D
to E
to F
2
VREF
1
SCP
VCC
IN1-
FB1
CSOFT1
IN2-
FB2
CSOFT2
IN3-
FB3
CSOFT3
IN4-RE
FB4RE
IN4-
FB4
CSOFT4
IN5-
FB5
CSOFT5
IN6-
FB6
CSOFT6
GND
CTL
VBIAS
-
+
CSOFT1
3
IN14
FB1
5
SCPOUT
STBY6
OUT1N
STBY4
SCP
SCP
STBY
STBY3
SYN1
+
+
+
+
+
+
-
+
+
-
STBY1
0.022μF
STBY2
VREF
RT
VREF
6
7
1μF
VCC
OSC
CT
OUT1
8
CSOFT2
IN2FB2
+
+
+
-
UT2
OUT2N
VCC
VBLAS
OUT1
OUT1N
OUT2
OUT2N
VS
OUT3
OUT4
OUT5
OUT6
SYN2
+
+
-
+
22
OUT3
VO1=1.5V/
IO1=100mA
VO2=2.5V/
IO2=100mA
VO3=3.3V/
IO3=400mA
VO4=7V/
IO4=10mA
ON/OFF5
VO5=15V/
IO5=100mA
ON/OFF6
VO6=12V/
IO6=100mA
Lithium-ion X 2
(5V to 8.4V)
21
20
19
18
17
16
VS(PGND)
15
A
B
C
D
E
F
VBATT
IN39
FB3
10
CSOFT2
11
SGND
17
23
+
+
-
+
+
-
+
+
-
+
+
-
+
+
-
+
+
-
STBY5
+
-
+
+
-
24
CTRL
12
RT
14
13
18
Power Supply ICs for Single Lens Reflex Digital Cameras
LV5604T
LV5621LP
■ Applications
unit: mm
33
SIDE VIEW
(0.125)
64
0.4
16
0.4
2.6
● Low power dissipation
● Switching among 3 power sources
(main battery, button battery, external power supply)
● LDO×3 (2.6V, 3.0V, 3.2V)
● Three voltage detection circuits (2.6V, 2.8V, 2.2V)
17
1
(C0.116)
■ Functions/Features
9.0
7.0
■ Functions/Features
BOTTOM VIEW
2.6
32
49
● Low voltage (3V minimum) operation
● Reference voltage precision: ± 1%
● Independent standby function for each of the 8 channels
● Is capable of driving MOS transistors
● Synchronous rectification: channels 1 and 2
● Supports inverting step-up operation
TOP VIEW
(0.13)
0.5
7.0
48
unit: mm
For digital still cameras
Switching IC between main and backup power supplies
9.0
0.125
0.16
2
(0.55)
SIDE VIEW
1.2max
0.1
0.25
SANYO: TQFP64J(7X7)
Type
Input voltage Output voltage
Multiple power
supply
Programmable
externally
3V to 15V
Channels
Power stages
Package
8ch (Step up 3, down 5)
External
TQFP64J(7×7)
SANYO: VCT16(2.6X2.6)
Input voltage
VCC1: 2.7V to 4.8V
Package
VCC2: 3V
VCC3: 3.5V to 5.2V
VCT16(2.6×2.6)
Block Diagram
Applications
For DSCs and game
machines
Block Diagram
FB1A
FB2A
FB3A
FB4A
FB6A
FB7A
FB8A
FB5A
VOUT
Lithium-ion/AC adapter
LDO1
VIN
(2.7 to 4.8V)
VREF
IN1-
FB1
CSOFT1
IN2-
FB2
CSOFT2
IN3-
FB3
CSOFT3
IN4-
FB4
CSOFT4
IN5-RE
FB5RE
IN5-
IN5+RE
FB5
CSOFT5
IN6-
FB6
CSOFT6
IN7-
FB7
CSOFT7
IN8-
FB8
CSOFT8
CTL
-
+
CTL
CLK_OUT
REG 3.2V
60mA
VBATT
Pch
Voltage detection
2.6V
Hysteresis width
40mV
LDO3
VBOOST
VBATT M1
REG 2.6V
30mA
SW_VOUT
Pch
10kΩ
SW_ON
SEL
200kΩ
Pch
Nch
PULL_UPV
SCP_OUT
CT
STBY
OSC
CLK_IN RT
(NC) (NC)
+
+
-
+
+
-
+
+
-
+
+
-
+
+
-
+
+
-
+
+
-
+
+
-
CLK
PULL_UPON
22kΩ
+
+
+
+
+
+
-
+
-
+
-
BAT_OFF
Signal system
power supply VCC
OUT1
OUT1N
SYNC1
OUT2
OUT2N
SYNC2
OUT3
Pre-output stage
power supply VBIAS1
Voltage detection
Set to low at 2.8V
Set to high again at 2.9V
SCP
SCP
SYNC1
L: Synchronous
rectification
H: Diode rectification
SYNC2
L: Synchronous
rectification
H: Diode rectification
OUT4
VBIAS2
OUT5
OUT6
OUT7
SEL_CH8 MODE
Step-down;
Connect to VBIAS
Step-up;
Connect to GND2 SEL_CH8
OUT8
GND_S
GND_P(VS2)
GND_P(VS1)
STBY8
STBY7
STBY6
STBY5
STBY4
STBY3
STBY2
STBY1
Reset voltage
detection 2.2V
Hysteresis width
0.1V
22kΩ
Nch
RESET
Delay circuit
Nch
LDO2
VCHG
REG 3.0V
15mA
1.1kΩ
BACK_CNT
Input: LDO2 ON when H
FB1A
FB2A
VBAT
Step-down
(DOWN)
VO1
3.3V/100mA
Step-down
(DOWN)
Step-down
(DOWN)
VO2
3.3V/100mA
FB3A
Step-down
(DOWN)
VO2
3.3V/100mA
Inversion
(INVENT)
Step-up
(UP)
FB7A
Step-up
(UP)
VO3
-4V/100mA
FB6A
FB8A
Step-up
(UP)
FB4A
FB5A
ON/OFF
setting
ON/OFF
setting
ON/OFF
setting
19
1
0.5
LASER MARKED
INDEX
0.8
(1.0)
(0.5)
16
8-channel switching regulator control IC
(0.035)
■ Applications
Power Supply Switching ICs
GND
DC_IN
600Ω
DC_IN
Channel 8 step-up/step-down is
selected by SEL_CH8
20
Power ICs with a Watchdog Timer Function
Rechargeable Battery Charge Control ICs
LA5693AM/93D/93M
5.0
1
4
8
Absolute maximum
ratings input voltage
41V
4
1.27
(1.5)
3.2
0.51MIN
2.54
0.5
0.1
(0.76)
0.15
0.35
1.7max
(0.65)
SANYO: DIP8(300mil)
MFP8(225mil)
DIP8(300mil)
SANYO: MFP8(225mil)
Function reset Watchdog time typ
logic output
(Ct=2μF)
Package
(LA5693AM)
(LA5693D/93M)
0.63
0.25
(3.0)
3.9MAX
1
Total power dissipation
0.37W
0.5W
1.4
1.0
(LA5693AM/93M)
(LA5693D)
Inverted
10
6
1
5
■ Functions/Features
4.4
6.4
6.4
■ Functions/Features
5.0
5
0.63
5
7.62
8
40ms
● Built-in circuit that prevents system malfunction when
the input voltage (car battery voltage) falls.
● Provides a constant voltage output that in proportion
to the PWM input signal (permits output voltage
control by microcontroller)
● High-precision reference current (current control amp)
92.5μA ± 2.7%
● Output voltage can be set through an external resistor.
● Each loop of the voltage amp and current amp is
independent.
Battery type
Lithium-ion,
nickel-metal hydride
6.4
9.14
● An external PNP transistor can be used to provide a
low-saturation voltage regulator
● Since the CK input has no edge detector, a high degree of
flexibility is allowed in applications (LA5693AM)
● Variable detection voltage (LA5693AM)
● Watchdog time can be made longer (LA5693AM)
● 5V output voltage power supply controller
(LA5693D/93M)
● Built-in watchdog timer (LA5693D/93M)
● Power supply reset signal generation function
(LA5693D/93M)
● Reset hold output RES(2) (cleared with CK reinput)
(LA5693D/93M)
unit: mm
DC-DC converter secondary side control IC
4.4
Microcontroller systems for use in automobiles and other
industrial equipment
■ Applications
unit: mm
1.7max
unit: mm
0.15
0.1 (1.5)
■ Applications
LA5636M
0.35
1.0
(0.5)
SANYO: MFP10S(225mil)
Absolute maximum
ratings Input voltage
Total power
dissipation
Package
Functions/Features
14.5V
0.36W
MFP10S(225mil)
Car battery DC-DC converter control IC, output voltage proportional to
PWM input signal for charging lithium-ion batteries, etc.
Block Diagram
Block Diagram
VOUT
IN
VCC
VO
R8 390kΩ
VCONT
1
Error AMP
TR2
2SA1258
D1
DS135E
R6
1.1kΩ
R7
2.2kΩ
TR3
2SC3031
R4
1kΩ
R5
750kΩ
R3
10kΩ
Start
Up
VO
Co
100μF
3
VDD
10kΩ
VREF
6
RESET
GENERATOR
VOUT
DETECTOR
Batt
2
RES(1)
+
CPU
VCC
RES
RES(2)
WDT
3
5
R6 R8
Tr1
+
Tr2
Tr3 Tr6
+
15kΩ
15kΩ
5
8
0.01μF
R1
13kΩ
7
CK
VS
Tr4
Tr 5
4 GND
Ct
C ck
2
GND
X1 R7 R9
+
2.0V
R3
10kΩ
R2
33kΩ
X2
+
-
R4
R5
200kΩ 30kΩ
Vref
2.5V
±1%
+ X4
R10
1.6kΩ Tr13
+ X3
-
X5
Tr8
Tr9
Tr10
Tr11
+
Tr12
4
+ 1.25V
R11
GND
GND
R1
R2
1
ICONST
Tr7
DO
VSS
V+IN
V-IN C1 Isen+IN Isen-IN
7
6
10 9 8
DOUT
PWM
C in
10μF
+
100kΩ
+
12V/24V
+
Ct
PWM
GND A/D1 A/D2
Microcontroller
21
22
Dedicated Reset Function ICs
LED Driver ICs
LA5623M
■ Applications
unit: mm
1.27
0.15
0.35
(1.0)
0.25
0.63
4
● Four main LED driver circuits
● Supports two LED current modes
● Compact package
● Thermal shutdown function
2
SIDE VIEW
0.25
-0.3V to +12V
0.3W
0.0NOM
0.1
Package
Functions/Features
2-system reset IC with built-in 1.25V, and 4.2V reference voltages, delay
time 25ms, 50ms, 100ms, or 200ms switchable
MFP8(225mil)
1
0.5 (0.5)
SANYO: MFP8(225mil)
Absolute maximum Total power
ratings Input voltage dissipation
12
2
1
(0.8)
(1.5)
(0.65)
Exposed Die-Pad
Do Not Connect
■ Functions/Features
1.7max
1
BOTTOM VIEW
SIDE VIEW
2.0
4.4
6.4
■ Functions/Features
● Reset circuit (output 1) that detects the input voltage
and provides a delay time of 200μs
● System reset circuit with switchable delay time of
25ms, 50ms, 100ms, and 200ms (output 2)
Low
minimum operating voltage
●
● Both reset 1 and reset 2 have hysteresis characteristics
TOP VIEW
5
2.0
8
unit: mm
LED driver for use in cell phones
5.0
(1.0)
Combination system reset IC
0.85MAX
■ Applications
LV5215LF
SANYO: VQFN12(2.0X2.0)
Input voltage
Channels
Package
Circuit Functions and Applications
3.0V to 4.5V
4ch
VQFN12(2.0×2.0)
LED driver for use in cell phones
Block Diagram
Block Diagram
VCC
7
10kΩ
MLED1
VREF
1.25V
VBAT
ILED
VCC1
MLED2
MLED3
MLED4
VCC
6 OUT1
+
INPUT 2
LED DRIVER
10kΩ
VREF
4.2V
+
OSC
-
Divider circuit
Drive block
IREF
5 OUT2
SWI
Reset circuit
SWO
R2
11kΩ
23
8
4
1
3
MANUAL
RESET
GND
Ct0
Ct1
RT
CTL
GND
IRT
Multiplexer
IF
R1
110kΩ
24
LED Driver ICs
LV5217GP
MEMO
■ Applications
unit: mm
3-channel LED driver for cell phones
TOP VIEW
SIDE VIEW
BOTTOM VIEW
(0.125)
(0.13)
2.6
(C0.116)
● Three color LED driver circuits
● The LED current can be switched independently in
7-bit units (0.31 to 25.48mA)
● Independent on/off control of three LED drivers
(independent control of the 3 RGB colors)
● Each LED driver current level can be adjusted
independently over the I2C bus
● Compact package
● Thermal shutdown circuit
Input voltage
Channels
Package
3.0V to 4.5V
3ch
VCT16(2.6×2.6)
16
0.4
2.6
■ Functions/Features
2
1
0.5
LASER MARKED
INDEX
(0.55)
0.8
SIDE VIEW
(0.035)
0.25
SANYO: VCT16(2.6X2.6)
Circuit functions and applications
3-channel LED driver for cell phones
Block Diagram
VBAT
VDD
NC11
NC10
SCL1
12
11
10
9
STBY 13
RLED
Interface level shifters
14
8
SDAI
7
VCC
6
NC6
5
NC5
Serial bus interface
GLED
BLED
15
16
IREF
1
2
TEST
3
GND
4
RT
LEDON
56kΩ
25
26
Ordering number : EP91G
SANYO Semiconductor Co.,Ltd. Website
http://www.semic.sanyo.co.jp/index_e.htm
This catalog provides information as of June, 2008.
Specifications and information herein are subject to change without notice.
SANYO Semiconductor Co., Ltd.