Download Sanyo EP91G User's Manual
Transcript
Power Supply ICs, LED Driver ICs 2008-6 For both analog and digital systems, SANYO multifunction regulator IC products, support our customers' creation of the new wave of next generation in electronic products by providing extensive functionality and high reliability for all electronic devices. Contemporary electronic equipment requires a wide range of high-level technologies to remain viable in today's competitive market. For example, cell phones require technologies that achieve stable operation at low input voltages, improved efficiency, and further miniaturization in the power supply system. Similarly, digital home appliances not only requires low-power/low-voltage operation and improved efficiency, but also low power consumption in standby mode to meet energy usage requirements and the ability to meet high-frequency radiation standards. We at SANYO Semiconductor makes a point of grasping these needs as early as possible and developing ICs contributing to achieve improved system development and high level of integration based on our rich experience in general-purpose product technologies. * The outer dimensions in this brochure are only reference values (typical values). They may change without notice due to modifications or improvements. At the time of product design or delivery, be sure to check with the delivery specifications or external dimension drawings of each device. CONTENTS ♦Product Lineup • DC-DC Converter (Control) ICs ------------------ 3 • DC-DC Converter (Control) ICs ------------------ 3 [Synchronous Rectification Type] • AC-DC Converter (Control) ICs ------------------ 4 • Power Supply ICs -------------------------------- 4 for Single Lens Reflex Digital Cameras • Power Supply ICs for Surveillance Cameras --- 4 • Power Supply ICs for Panels -------------------- 4 • System Power Supply ICs ----------------------- 5 (for Portable Electronic Devices) • System Power Supply ICs ----------------------- 5 (for AV Electronic Devices) 1 • Series Power Supply ICs ----------------------- 6 to 9 • Power Supply Switching ICs ---------------------- 9 • Power ICs with a Watchdog Timer Function ----- 10 • Dual-Protection ICs -------------------------------- 10 • Dual-Protection ICs ---------------------------- 10, 11 (for Rechargeable Lithium-ion Batteries) • Rechargeable Battery Charge Control ICs ------- 11 • Dedicated Reset Function ICs -------------------- 11 • LED Driver ICs -------------------------------------- 11 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. 2 Product Lineup DC-DC Converter (Control) ICs ●: New products and ❈: Development Type No. Type Output voltage Channels Power stages LA5660M Step up Input voltage 1.8V to 14V Programmable externally 1ch External (NPN or NMOS) MFP8(225mil) Package ● LV5803M Step down 4.5V to 18V Programmable externally 1ch Built in MFP8(225mil) P ❈ LV5807MA Step down 4.5V to 18V Programmable externally 1ch Built in SOP8J(200mil) LA5724M Step down 4.5V to 28V Programmable externally/0.6A 1ch Built in MFP8(225mil) ● LA5744 Step down 4.5V to 28V Programmable externally/3A 1ch Built in 220-5HK ● LA5744MP Step down 4.5V to 28V Programmable externally/3A 1ch Built in SMP5 ● LA5744TP Step down 4.5V to 28V Programmable externally/3A 1ch Built in TP5HFA ● LA5774 Step down 4.5V to 28V Programmable externally/3A 1ch Built in 220-5H 12 ● LA5774MP Step down 4.5V to 28V Programmable externally/3A 1ch Built in SMP5 12 ● LA5779 Step down 4.5V to 28V Programmable externally/3A 1ch Built in 220-5H 12 ● LA5779MP Step down 4.5V to 28V Programmable externally/3A 1ch Built in SMP5 12 ● LA5779N Step down 4.5V to 28V Programmable externally/3A 1ch Built in 220-5HK ● LA5734MP Step down 4.5V to 32V Programmable externally/3A 1ch Built in SMP5 ● LA5735M Step down 4.5V to 32V Programmable externally/0.6A 1ch Built in MFP8(225mil) ❈ LA5755 Step down 4.5V to 32V Programmable externally 1ch Built in TO220 ❈ LA5756 Step down 4.5V to 32V Programmable externally 1ch Built in TO220 ❈ LV5745GP Step down 4.5V to 6V Programmable externally 3ch External (PMOS) VCT28(3.0×3.0) ● LV5781 Step down 4.5V to 6V Programmable externally 1ch Built in HSSOP14(225mil) LA5771MP Step down 5.5V to 28V 3.3V/3A 1ch Built in SMP5 12 LA5771 Step down 5.5V to 32V 3.3V/3A 1ch Built in 220-5H 12 LA5772MP Step down 7V to 28V 5V/3A 1ch Built in SMP5 12 ● LA5772 Step down 7V to 32V 5V/3A 1ch Built in 220-5H 12 Type No. LA5680T VCT24(3.5×3.5) VCT24(3.5×3.5) 14 ● LV5609LP V driver for CCD Ratings are listed on separate datasheet 5ch Built in VCT24(3.5×3.5) ● LV5609V V driver for CCD Ratings are listed on separate datasheet 5ch Built in SSOP20(225mil) Step up/down 4V to 5.6V 5V/250mA 1ch Built in MFP14S(225mil) LV5051T Step up/down+ Linear regulator 1.5V to 4.4V 2V to 8.0V 2.5V (Step up/down) 2.8V/3.9A (Linear) 3ch Built in TSSOP24(225mil) ● TN5D41A Step down 10V to 40V 5V/5A 1ch Built in (PMOS) TO-220FI5H-HB ❈ TN8D41A Step down 10V to 40V 5V/8A 1ch Built in (PMOS) TO-220FI5H-HB 14 ● TN5D51A Step down 20V to 48V 12V/5A 1ch Built in (PMOS) TO-220FI5H-HB 14 ❈ TN8D51A Step down 20V to 48V 12V/8A 1ch Built in (PMOS) TO-220FI5H-HB 14 ❈ TN5D61A Step down 30V to 48V 24V/5A 1ch Built in (PMOS) TO-220FI5H-HB 14 ●: New products and ❈: Development DIP16(300mil) 3 Package Built in LA5664M SSOP16(225mil) Power stages Built in SSOP16(225mil) External (NMOS) Input voltage Output voltage Channels 2ch External (PMOS) 1ch Type 2ch 2ch Programmable externally Type No. ●: New products and ❈: Development 15V, -5.5V Programmable externally 8V to 42V Power Supply ICs for Surveillance Cameras 15V, -7.5V 8V to 33V Step down 19 3V to 3.45V Step down LV5741 TQFP64J(7×7) 3V to 3.45V LV5743V ❈ External ± Charge pump step-up ● MSOP12(150mil) Programmable 8ch externally (Step up 3, down 5) ± Charge pump step-up MFP8(225mil) External (NMOS) 3V to 15V LV56081GP Built in External (NMOS) 18 LV5608LP 1ch 1ch SSOP24(225mil) ❈ Programmable externally 1ch External ● 8V to 28V Programmable externally Programmable 3ch externally (Step up 1, down 2) SSOP30(275mil) Step down Programmable externally 3V to 15V Built in LV5808M 8V to 42V 17 2ch ❈ 8V to 42V TQFP48J(7×7) Programmable externally SOP8J(200mil) Step down External 3V to 3.45V Built in Step down Programmable 6ch externally (Step up 2, down 4) ± Charge pump step-up 1ch LV5749V 3V to 15V LV5606V Programmable externally LV5747TT TSSOP36(275mil) ❈ 8V to 28V ❈ External VQLP32(4.0×4.0) Step down ❈ Programmable 3ch externally Built in LV5806MA SSOP20(225mil) 1.8V to 11V 2ch ❈ External (NMOS) TSSOP36(275mil) Programmable externally 12 1ch External (NPN, PNP or NMOS, PMOS) 3V to 3.45V SMP5 Programmable externally Programmable 3ch externally (Step up 1, down 2) ± Charge pump step-up Built in Step down 1.8V to 11V LV5606LP 1ch LV5050V TSSOP36(275mil) ❈ 5V/3A ● External (NPN, PNP or NMOS, PMOS) MFP8(225mil) 8V to 28V SSOP30(275mil) Programmable 4ch externally (Step up 2, down 2) Built in (External diode) Step down External (NMOS) 1.8V to 8V 1ch LA5777MP 2ch LV5604T TQFP48J(7×7) Programmable externally ● Programmable externally ● P 1ch Built in MSOP10(150mil) Power Supply ICs for Panels Type No. Type P 1.5V to 12V 7.5V to 28V 12 Step down LV5655 Package Charge pump step-up 220-5H LV5044V ❈ Power stages External (NPN, PNP or NMOS, PMOS) LA5797M SSOP20(225mil) Built in ● LV5603T Channels Programmable 6ch externally (Step up 4, down 2) ● External (PMOS) 1ch 7.5V to 16V 4.5V to 6V 7.5V to 16V 4.5V to 6V ● Input voltage Output voltage 16 ●: New products and ❈: Development 13.5V to 28V 2ch 5V/3A Package 30 Charge pump step-up Programmable externally Power stages LA5679T Type Mixed step up/ step down Mixed step up/ step down Mixed step up/ step down Multiple power supply Multiple power supply Multiple power supply Multiple power supply P UVLO, primary side PbyPOCP, secondary side timer type OCP LA5795T 8V to 22V 8V to 28V Channels Features VCC(V) ● Step down Step down Output voltage DIP8(300mil) Functions RCC/separately-excited fly-back AC-DC converter controller Programmable externally LA5777 Input voltage LA5683T 12 LV5746V Type ● LA5669T ❈ Type No. LA5648 Package Power Supply ICs for Single Lens Reflex Digital Cameras ● DC-DC Converter (Control) ICs [Synchronous Rectification Type] Type No. 13 ● ● AC-DC Converter (Control) ICs P ●: New products and ❈: Development Input voltage Output voltage Channels Power stages ❈ LA5661M Backlight inverter 1.8V to 14V ● LA5663V Phase control voltage inverter 4.5V to 23V Package Programmable externally 1ch External MFP10S(225mil) Programmable externally (Current) 1ch External SSOP24(275mil) P 15 4 System Power Supply ICs (for Portable Electronic Devices) Regulator output voltage/current Type No. LA5160AM LV5105FN ● LV5103LP 1 5V/ 100mA 2.8V/ 150mA 1 1.5V/ 30mA 5 3.3V/ 150mA 2 2.6V/ 100mA 2 2.85V/ 200mA 6 1.5V/ 200mA 3 2.85V/ 50mA 3 2.85V/ 150mA 7 1.8V/ 150mA 4 3V/ 50mA 4 3.1V/ 450mA 8 1.2V/ 500mA ●: New products Series Power Supply ICs Absolute maximum ratings Input voltage (V) Total power dissipation (W) Package 40 0.8 MFP8(225mil) 5.9 0.44 3.2 to 4.5 VQFN48(7×7) 1.1* VQLP40(5.0×5.0) Functions/Features P Low consumption current at output-off time with built-in ON/OFF function. Built-in reset circuit × 2, 3-color LED driver, front LED driver, and microphone bias output. Type No. LA5002M Positive 0.06 voltage LA5003 Positive 0.06 voltage ● 12 LA5003M Positive 0.06 voltage ● 12 LA5004 Positive 0.06 voltage ● 12 LA5004M Positive 0.06 voltage ● 12 LA5005 Positive 0.06 voltage ● 12 LA5005M Positive 0.06 voltage ● 12 LA5006M Positive 0.06 voltage LA5008M Positive 0.06 voltage LA5009M Positive 0.06 voltage LA5010M Positive 0.06 voltage 11.3V/0.3A ripple filter switching regulator control amplifier built in. L88M05T Positive voltage 0.5 Built-in driver L88M06T Positive voltage 0.5 L88M09T Positive voltage 0.5 L88M12T Positive voltage 0.5 Built-in step-down DC-DC converter × 1, series regulator × 8, and short-circuit protection circuit *Ratings mounted on board: 40mm×50mm×0.8mm, Regulator output voltage/current Type No. LA5632 LA5643 LA5624H LA5635H LA5613 LA5601 LA5617 LA5605 LA5606N 5 2 3.3V/ 60mA 3.5V/ 150mA 1 5V/ 50mA 6 8V/ 100mA 11 OP1-C/ 10mA 1 5V/ 50mA 6 8V/ 100mA 11 OP1-C/ 10mA 3.3V/ 150mA 5V/ 1000mA 2 5.1V/ 700mA SW/ 300mA 5.2V/ 250mA 7.5V/ 500mA 7.5V/ 500mA 15.7V/ 350mA 3.4V/ 10mA −7.5V/ −500mA 9V/ 60mA 12V/ 200mA 3 5V/ 1000mA 5V/ 100mA 3 8V/ 10V/* 100mA 7 8 5V/ 5V/ 100mA 300mA 12 13 OP2-C/ OP3-C/ 10mA 10mA 2 3 8V/ 10V/* 200mA 7 8 5V/ 5V/ 100mA 300mA 12 13 OP2-C/ OP3-C/ 10mA 10mA 5V/ 10mA 9V/ 150mA 4 5 5V/ 100mA Absolute maximum ratings Input Total power voltage dissipation (W) (V) 14 14 4 8V/ 30mA 9 SW/ 100mA 14 OP4-C/ 10mA 4 8V/ 30mA 9 SW/ 100mA 14 OP4-C/ 10mA 5V/ 500mA 12 ● Glass epoxy 4-layer (2S2P) board System Power Supply ICs (for AV Electronic Devices) 1 Absolute Output voltage (V) maximum ratings Output Type Current Input Total power Package (A) 1.8 2 2.5 3 3.3 3.4 3.5 4 5 6 7 8 9 10 12 15 18 20 24 voltage dissipation (V) (W) 5 8V/ 150mA 10 SW/ 100mA 24 2.3 2.0 2.01 Functions/Features Package SIP12H ON/OFF function Reset output ● ● SIP13H HSOP28HC (375mil) P Notes With power ON/OFF detection circuit. ● ● ● 10V regulator (when used with external PNP transistor) with standby function (on/off control). 16 ● * Within ASO of external TR 5 8V/ 150mA 10 SW/ 500mA 24 2.01 HSOP28HC (375mil) ● ● 10V regulator (when used with external PNP transistor) with standby function (on/off control). * Within ASO of external TR 14 1.7 SIP10F ● 15 1.0 DIP10S (300mil) ● ±18 2.0 SIP10F ● 24 2.0 SIP13H 35 4.3 SIP14H ● ±Voltage tracking regulator Built-in AC standby and power detection functions. ● 16 ● 16 ● 16 ● 18 ● 18 ● 18 ● ● 18 Features P 2V low-saturation voltage regulator, 2V output voltage, MFP8 0.3 60mA output current, (225mil) low-saturation (0.2V typ) series regulator, RF noise suppression 3V low-saturation voltage regulator, 3V output voltage, 0.56 SIP4H 60mA output current, low-saturation (0.2V typ) series regulator, RF noise suppression 3V low-saturation voltage MFP8 0.3 regulator, SOP (MFP) (225mil) version of LA5003 4V low-saturation voltage regulator, 4V output voltage, 0.56 SIP4H 60mA output current, low-saturation (0.2V typ) series regulator, RF noise suppression 4V low-saturation voltage MFP8 0.3 regulator, SOP (MFP) (225mil) version of LA5004 5V low-saturation voltage regulator, 5V output voltage, 0.56 SIP4H 60mA output current, low-saturation (0.2V typ) series regulator, RF noise suppression 5V low-saturation voltage MFP8 0.3 regulator, SOP (MFP) (225mil) version of LA5005 6V low-saturation voltage regulator, 6V output voltage, MFP8 60mA output current, 0.3 (225mil) low-saturation (0.2V typ) series regulator, RF noise suppression 8V low-saturation voltage regulator, 8V output voltage, MFP8 60mA output current, 0.3 (225mil) low-saturation (0.2V typ) series regulator, RF noise suppression 9V low-saturation voltage regulator, 9V output voltage, MFP8 0.3 60mA output current, (225mil) low-saturation (0.2V typ) series regulator, RF noise suppression 10V low-saturation voltage regulator, 10V output voltage, MFP8 60mA output current, 0.3 (225mil) low-saturation (0.2V typ) series regulator, RF noise suppression 5V low-saturation voltage regulator, 5V output voltage, 0.5A output current, 1.0 TP3H 0.4V (typ) minimum I/O voltage drop 6V low-saturation voltage regulator, 1.0 TP3H 6V output voltage, 0.5A output current, 0.4V (typ) minimum I/O voltage drop 9V low-saturation voltage regulator, 1.0 TP3H 9V output voltage, 0.5A output current, 0.4V (typ) minimum I/O voltage drop 12V low-saturation voltage regulator, 1.0 TP3H 12V output voltage, 0.5A output current, 0.4V (typ) minimum I/O voltage drop Continued on next page. 6 Series Power Supply ICs Series Power Supply ICs Continued from preceding page. Absolute maximum ratings Type No. L88M33T L88M35T L88MS04T L88MS05T L88MS06T Positive voltage Positive voltage Positive voltage Positive voltage Positive voltage L88MS08T Positive voltage L88MS09T Positive voltage L88MS12T L88MS33T L88MS34T L88R05C L88R05D L88R05E 7 Output voltage (V) Output Type Current Input Total power Package (A) 1.8 2 2.5 3 3.3 3.4 3.5 4 5 6 7 8 9 10 12 15 18 20 24 voltage dissipation (V) (W) Positive voltage Positive voltage Positive voltage Positive voltage Positive voltage Positive voltage 0.5 18 ● 0.5 18 ● 0.5 18 ● 0.5 0.5 1.0 1.0 18 ● 0.5 1.0 18 ● 0.5 0.5 18 ● 0.5 0.5 18 ● ● 18 18 ● 18 ● ● ● ● 18 18 18 1.0 1.0 Features TP3H 3.3V low-saturation voltage regulator, 3.3V output voltage, 0.5A output current, 0.4V (typ) minimum I/O voltage drop TP3H 3.5V low-saturation voltage regulator, 3.5V output voltage, 0.5A output current, 0.4V (typ) minimum I/O voltage drop 4V low-saturation voltage regulator with strobe pin, 4V output voltage, 0.5A output 1.0 TP5H current, strobe pin, 0.4V (typ) minimum I/O voltage drop 5V low-saturation voltage regulator with strobe pin, 1.0 TP5H 5V output voltage, 0.5A output current, strobe pin, 0.4V (typ) minimum I/O voltage drop 6V low-saturation voltage regulator with strobe pin, 1.0 TP5H 6V output voltage, 0.5A output current, strobe pin, 0.4V (typ) minimum I/O voltage drop 8V low-saturation voltage regulator with strobe pin, 1.0 TP5H 8V output voltage, 0.5A output current, strobe pin, 0.4V (typ) minimum I/O voltage drop 9V low-saturation voltage regulator with strobe pin, 1.0 TP5H 9V output voltage, 0.5A output current, strobe pin, 0.4V (typ) minimum I/O voltage drop 12V low-saturation voltage regulator with strobe pin, 1.0 TP5H 12V output voltage, 0.5A output current, strobe pin, 0.4V (typ) minimum I/O voltage drop Low-saturation voltage regulator with on/off function, 3.3V output voltage, 0.5A output current, 1.0 TP5H strobe pin, 0.4V (typ) minimum I/O voltage drop 3.4V low-saturation voltage regulator with strobe pin, 3.4V output voltage, 0.5A output 1.0 TP5H current, strobe pin, 0.4V (typ) minimum I/O voltage drop 4.5V low-saturation voltage regulator with reset pin, 2.75 220-5H 5V output voltage, 1A output current, reset pin, 0.5V (typ) minimum I/O voltage drop 4.2V low-saturation voltage regulator with reset pin, 2.75 220-5H 5V output voltage, 1A output current, reset pin, 0.5V (typ) minimum I/O voltage drop 3.9V low-saturation voltage regulator with reset pin, 2.75 220-5H 5V output voltage, 1A output current, reset pin, 0.5V (typ) minimum I/O voltage drop P Type No. Absolute Output voltage (V) maximum ratings Output Type Current Input Total power Package (A) 1.8 2 2.5 3 3.3 3.4 3.5 4 5 6 7 8 9 10 12 15 18 20 24 voltage dissipation (V) (W) L78LR05 Positive 0.15 voltage ● 25 1.0 TP5H L78M05T Positive voltage 0.5 ● 35 1.0 TP3H L78M06T Positive voltage 0.5 35 1.0 TP3H L78M07T Positive voltage 0.5 35 1.0 TP3H L78M08T Positive voltage 0.5 35 1.0 TP3H L78M09T Positive voltage 0.5 35 1.0 TP3H L78M10T Positive voltage 0.5 35 1.0 TP3H L78M12T Positive voltage 0.5 35 1.0 TP3H L78M15T Positive voltage 0.5 35 1.0 TP3H L78M18T Positive voltage 0.5 35 1.0 TP3H L78M20T Positive voltage 0.5 35 1.0 TP3H L78M24T Positive voltage 0.5 35 1.0 TP3H L78MG Positive voltage 0.5 35 1.2 SIP4H L780S05 Positive voltage 1.0 35 1.75 220-5H L780S08 Positive voltage 1.0 35 1.75 220-5H L780S09 Positive voltage 1.0 35 1.75 220-5H L780S10 Positive voltage 1.0 35 1.75 220-5H ● ● ● ● ● ● ● ● ● ● ● ● ● ● Features P 5V voltage regulator with reset pin, 5V output voltage, 150mA output current, reset pin 5V 0.5A 3-pin voltage regulators, 5V output voltage, 500mA output current, 1.0W power dissipation 6V 0.5A 3-pin voltage regulators, 6V output voltage, 500mA output current, 1.0W power dissipation 7V 0.5A 3-pin voltage regulators, 7V output voltage, 500mA output current, 1.0W power dissipation 8V 0.5A 3-pin voltage regulators, 8V output voltage, 500mA output current, 1.0W power dissipation 9V 0.5A 3-pin voltage regulators, 9V output voltage, 500mA output current, 1.0W power dissipation 10V 0.5A 3-pin voltage regulators, 10V output voltage, 500mA output current, 1.0W power dissipation 12V 0.5A 3-pin voltage regulators, 12V output voltage, 500mA output current, 1.0W power dissipation 15V 0.5A 3-pin voltage regulators, 15V output voltage, 500mA output current, 1.0W power dissipation 18V 0.5A 3-pin voltage regulators, 18V output voltage, 500mA output current, 1.0W power dissipation 20V 0.5A 3-pin voltage regulators, 20V output voltage, 500mA output current, 1.0W power dissipation 24V 0.5A 3-pin voltage regulators, 24V output voltage, 500mA output current, 1.0W power dissipation Variable type 4-pin 500mA constant voltage power supply, 35V/500mA, Pd: 1.2W 1A general-purpose voltage regulator, 5V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits 1A general-purpose voltage regulator, 8V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits 1A general-purpose voltage regulator, 9V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits 1A general-purpose voltage regulator, 10V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits Continued on next page. 8 Series Power Supply ICs Continued from preceding page. Output Type No. Type Current (A) L780S12 L780S15 Positive voltage Positive voltage 1.0 L78MR05 Positive voltage 0.5 L78MR06 Positive voltage 0.5 L78MR08 Positive voltage 0.5 L78MR12 Positive voltage 0.5 Positive L78MS05JSMP voltage L79M05T L79M06T L79M08T L79M09T L79M10T L79M12T Negative voltage Negative voltage 0.5 0.5 0.5 0.5 Negative voltage 0.5 Negative voltage 7 8 35 ● 35 ● ● ● ● ● ● ● ● 1.75 220-5H 1.75 220-5H 35 1.75 220-5H 35 1.75 220-5H 35 1.75 220-5H 35 1.75 220-5H 35 5V voltage regulator with strobe pin, 5V output voltage, 0.5A output 1.75 220-5H current, strobe pin (Features a low quiescent current of 35μA) 35 5V voltage regulator with strobe pin, 5V output voltage, 0.5A output current, strobe pin (Features a low quiescent current of 35μA) -35 ● -35 ● 0.5 -35 ● 0.5 ● -35 2.0 1.0 1.0 1.0 1.0 1.0 1.0 SMP5 TP3H TP3H TP3H TP3H TP3H TP3H P 1A general-purpose voltage regulator, 12V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits 1A general-purpose voltage regulator, 15V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits 1A general-purpose voltage regulator, 18V output voltage, 1A output current, strobe pin, thermal protection and overcurrent limiter circuits 5V voltage regulator with reset pin, 5V output voltage, 0.5A output current 6V voltage regulator with reset pin, 6V output voltage, 0.5A output current 8V voltage regulator with reset pin, 8V output voltage, 0.5A output current 12V voltage regulator with reset pin, 12V output voltage, 0.5A output current 1.75 220-5H -35 ● Features 35 -35 ● 0.5 Negative voltage Negative voltage 6 1.0 L780S18 Positive voltage 5 Input Total power Package 9 10 12 15 18 20 24 voltage dissipation (V) (W) 1.0 Positive voltage L78MS05J 1.8 2 2.5 3 3.3 3.4 3.5 4 Power ICs with a Watchdog Timer Function Absolute maximum ratings Output voltage (V) LV5621LP 9 Package VCT16(2.6×2.6) VCC1 Input voltage (V) VCC2 VCC3 2.7 to 4.8 3 3.5 to 5.2 For DSCs and game machines LV5622LP VCT16(2.6×2.6) 2.7 to 4.8 3 3.5 to 5.2 For DSCs and game machines LV5625V SSOP16(225mil) 1.45 to 3.4 3 3.5 to 5.2 For DSCs and game machines Function reset logic output Watchdog 5V Regulator Edge Reset time typ P regulator output detection hold (Ct=2μF) control ON/OFF LA5690D 41 0.5 DIP8(300mil) Noninverted/Inverted ● ● 5ms LA5690S 41 0.5 SIP9 Noninverted/Inverted ● ● 5ms LA5691S 41 0.5 SIP9 Inverted ● ● 5ms LA5692D 41 0.5 DIP8(300mil) Inverted ● ● ● 40ms LA5692M 41 0.37 MFP8(225mil) Inverted ● ● ● 40ms LA5692S 41 0.5 SIP9 Inverted ● ● ● 40ms ● LA5693AM 41 0.37 MFP8(225mil) Inverted ● ● 40ms 21 LA5693D 41 0.5 DIP8(300mil) Inverted ● ● 40ms 21 LA5693M 41 0.5 MFP8(225mil) Inverted ● ● 40ms 21 Type No. LA5695M Absolute maximum ratings Total power Input voltage dissipation (V) (W) 18 0.4 Package MFP14(225mil) Functions/Features Type No. P 20 Absolute maximum ratings Total power Input voltage dissipation (V) (W) Package P Protection ICs for heating/cooling equipment and OA equipment, Builtin abnormal supply voltage detection circuit, driver output with built-in output delay circuit, can be controlled from 8 input pins. Dual-Protection ICs (for Rechargeable Lithium-ion Batteries) -5V 3 pin voltage regulator (minus output), −5V/0.5A, Pd: 1.0W -6V 3 pin voltage regulator (minus output), −6V/0.5A, Pd: 1.0W -8V 3 pin voltage regulator (minus output), −8V/0.5A, Pd: 1.0W -9V 3 pin voltage regulator (minus output), −9V/0.5A, Pd: 1.0W -10V 3 pin voltage regulator (minus output), −10V/0.5A, Pd: 1.0W -12V 3 pin voltage regulator (minus output), −12V/0.5A, Pd: 1.0W Applications Package Dual-Protection ICs Power Supply Switching ICs Type No. Type No. Absolute Total power maximum ratings dissipation Input voltage (W) (V) ●: New products and ❈: Development Functions/Features ● LV5113T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ● LV5122T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV51130T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ● LV51131T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV51132T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV51133T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ● LV51134T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV51135T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV51136T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ● LV51137T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ● LV51138T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV5125T -0.3 to +12 0.17 MSOP8(150mil) 2-cell Lithium-ion rechargeable battery protection IC ❈ LV51110T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51110LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51111T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51111LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51112T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51112LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51113T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51113LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51114T -0.3 to +7 0.35 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC P Continued on next page. 10 DC-DC Converter (Control) ICs [Step down] LA5734MP/71/71MP/72/72MP/ 74/74MP/77/77MP/79/79MP 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51115T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51115LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51116T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51116LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51117T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51117LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51118T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51118LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51119T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51119LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ● LV51140T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51140LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ● LV51141T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51141LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51142T -0.3 to +7 0.35 SOT-23-6 1-cell Lithium-ion rechargeable battery protection IC ❈ LV51142LF -0.3 to +7 0.3 SON5(1.6×2.0) 1-cell Lithium-ion rechargeable battery protection IC Rechargeable Battery Charge Control ICs Type No. ❈ ■ Functions/Features ● Low-ESR capacitor with increased reliability applicable as the output smoothing capacitor (LA5774/74MP) ● High efficiency ● 4 external parts ● Built-in reference oscillator (160kHz) ● Built-in current limiter ● Built-in thermal shutdown circuit ● Built-in soft start circuit (LA5771/71MP/72/72MP/74/74MP) ● ON/OFF function (LA5734/77/77MP/79/79MP) Type Step down Input voltage • 4.5V to 28V • 4.5V to 32V • 5.5V to 28V • 5.5V to 32V • 7V to 28V • 7V to 32V • 8V to 28V Package Lithium-ion, nickel-metal hydride 14.5 0.36 MFP10S(225mil) LA5645M Charger 14.5 0.3 MFP8(225mil) LA5623M Total power dissipation (W) -0.3 to +12 0.3 0.45 4.5 8.4 SANYO: SMP5 SANYO: 220-5H Channels Power stages 1ch Package • 220-5H (LA5771/72/74/77/79) • SMP5 (LA5734MP/71MP/72MP/ 74MP/77MP/79MP) Built in ❈: Development Functions/Features P Car battery DC/DC converter control IC, output voltage propor22 tional to PWM input signal, for charging lithium-ion batteries Constant-voltage, constant-current control IC, high precision reference voltage (1.5V+1%), input offset voltage (2mV max.) SWOUT VIN L1 68μH OCP OSC Package Functions/Features 23 D1 SBD Reset P 2-system reset IC with built-in 1.25V, and 4.2V reference voltages, delay time 25ms, 50ms, 100ms, or 200ms switchable Drive C1 220μF /35V C2 1000μF /6.3V Comp. TSD R2 Amp. LED Driver ICs Type No. 0.8 1.7 5 • Programmable externally/3A (LA5734MP/74/74PM/79/79MP) • 3.3V/3A (LA5771MP/71) • 5V/3A (LA5772MP/72/77/77MP) Reg. MFP8(225mil) 5 1 2.7 (1.6) 1 2.7 0.9 0.2 0.4 Output voltage (LA5774/74MP/79/79MP) (LA5734MP) (LA5771MP) (LA5771) (LA5772MP) (LA5772) (LA5777/77MP) Dedicated Reset Function ICs Type No. 0.9 1.7 1.3 1.3 Example: LA5771 Block Diagram LA5636M Absolute maximum ratings Input voltage (V) (1.6) 4.5 4.5 Block Diagram Absolute Total power maximum ratings dissipation Input voltage (W) (V) Battery type 10.0 17.8 21.3 23.0 SON5(1.6×2.0) 15.0 0.3 10.4MAX 10.0 3.6 1.5 -0.3 to +7 unit: mm 1.2 LV51114LF unit: mm Separately-excited step-down switching regulator 9.9 ❈ P (8.8) Functions/Features 2.7 ■ Applications Package (8.8) Type No. Absolute maximum ratings Total power Input voltage dissipation (V) (W) ●: New products and ❈: Development Continued from preceding page. 4.5 Dual-Protection ICs (for Rechargeable Lithium-ion Batteries) VOS ●: New products Input voltage Channels Package Circuit functions and applications P LV5213LP 3.0 to 4.5 3ch VCT16(2.6×2.6) ● LV5215LF 3.0 to 4.5 4ch VQFN12(2.0×2.0) 4-channel LED driver for cell phones 24 ● LV5217GP 3.0 to 4.5 3ch VCT16(2.6×2.6) 3-channel LED driver for cell phones 25 VREF R1 3-channel LED driver for cell phones C3 1μF /50V SS GND * For other block diagrams, refer to the datasheet. 11 12 DC-DC Converter (Control) ICs [Step down] DC-DC Converter (Control) ICs [Separately-excited step-down] LV5803M ■ Applications unit: mm Type ■ Functions/Features Step down 4.5V to 18V 1.27 0.15 1.7max 0.1 (1.5) 0.35 Power stages Package Built in MFP8(225mil) 1ch Type 1.6 2.4 0.9 0.5 1 2 3 4 5 1.27 0.7 3.81 2.54 1.27 2.75 2.54 SANYO: TO-220FI5H-HB Input voltage Output voltage 10V to 40V (TN8D41A/TN5D41A) Step 20V to 48V (TN8D51A/TN5D51A) down 30V to 48V (TN5D61A) (5.9) 0.63 4 SANYO: MFP8(225mil) Input voltage Output voltage Channels Programmable externally ● Large current : IO max 8A (TN8D41A/51A) : IO max 5A (TN5D41A/51A/61A) ● High efficiency : Vertical-type P-channel power MOSFET built-in ● High withstand voltage : VIN max 57V ● Five external parts ● Built-in reference oscillator (150kHz) ● Built-in current limiter ● Built-in thermal shutdown circuit ● Built-in soft start circuit ● ON/OFF function (shared with soft start pin) 4.4 6.4 1 3.5 7.2 5 ■ Functions/Features (0.65) 2.8 16.0 8 4.5 3.2 Separately-excited step-down switching regulator 5.0 ● 2A 1-channel step-down switching regulator ● Wide input dynamic range (4.5 to 18V) : 90% IOUT=1A, VIN=12V, VO=5V ● High efficiency ● Compact package : MFP8 ● Standby mode ● Overcurrent protection ● Thermal shutdown : 330kHz ● Fixed frequency ● Reference voltage : 0.8V ● Soft start function 10.0 12.5 DC-DC converter unit: mm 14.0 ■ Applications TN8D41A/51A, TN5D41A/51A/61A 5V/5A (TN5D41A), 12V/5A (TN5D51A), 24V/5A (TN5D61A) Channels Power stages 5V/8A (TN8D41A), 12V/8A (TN8D51A), 1ch Block Diagram Built in (PMOS) Package TO-220FI5H-HB Block Diagram BOOT(SW+Vreg.) BOOT C2=10μF/25V VIN Current sense Amp Rb=39 Pre-drive 1:N VIN C8=10μF/25V L1=10μH 3 Under Voltage Protect Over Temperature Protect SWOUT VOUT Over Current Protect SENSE VOUT=3.3V Pch MOSFET OSC 330kHz R1=27kΩ Error Amp PWM comparator FB D1=SBM30-03 COMP BOOT Short protect C5=10μF/ 10V X 3 Ro=open SW R10=4.3kΩ R2=10kΩ 1 C1=0.022μF UVLO R3=10kΩ VIN=12V OUTPUT + GND SW -COMP + OSC SS 5 SOFTSTART circuit C4=OPEN Band Gap C3=1500pF COMP Internal stable supply VIN SS Short + • C1, C8, C5 = Ceramic capacitor used. • L1 = CDRH105RNP-100NC (sumida made) -- protect GND circuit C6=0.015μF EN Vref 0.8V TSD Internal regulator AMP FB 2 4 + Internal regulator (5V) open or H: ON L:OFF GND 13 GND 14 LV5050V ■ Applications unit: mm 7.5V to 16V 4.5V to 6V Programmable externally 1ch 1.5max 0.1 (1.3) 4 6.4 1 1.4 1.0 3.9MAX 0.15 0.22 (0.33) 2.54 (0.76) 0.5 SANYO: SSOP20(225mil) Input Voltage Output Voltage Channels Step down ● RCC power supply controller ● Overcurrent detection function ● Soft start function ● Input UVLO circuit ● Output overcurrent protection timer function ● Base winding voltage detection function 10 0.65 5 (3.0) 0.5 1 8 ■ Functions/Features 6.4 4.4 ■ Functions/Features ● Step-down DC-DC converter controller with 1-channel ● Input UVLO circuit, overcurrent detection function, soft start/soft stop function, start-up delay circuit ● Output voltage monitor function (Under voltage protection with power good and timer latch) ● Synchronized operation is possible between different devices 9.14 11 3.2 20 unit: mm RCC power supply controller 6.5 0.25 DC-DC converter Type LA5648 0.51MIN ■ Applications AC-DC Converter (Control) ICs SANYO: DIP8(300mil) Power Stages Package Functions VCC External (NMOS) SSOP20(225mil) RCC/separately-excited fly-back AC-DC converter controller 30 Features Voltage and Current generator BG BG refrrence IREF Current bias Vref 0.8V Input Power Supply 4.2V / 3.8V Np VLIN5 5V REG (Allways ON) Internal Bias Nb 8.3μA COMP ILIM Comp ILIM VCC UVLO 1.2V Vref CH1 Output 3.5V REG RSNS error amp FB PWM comp Vref 0.87Vref ISENSE Amp S Q 1.6V SD Corrective ramp SSEND POR 2.4V CONT1 PGOOD CONT POR DET COMP PWM COMP + -- PGND TRIANG OSC TIMER 3.5V SYC + COM R Q S Q 2.4V UV_DELAY Active discharge Rdson= 15Ω + OCL LDRV 5μA SSEND LOGIC CH1 Output VDD 0 deg UV OUT HDRV Shoot through protection sequencer SD 5μA TD CBOOT SW 3.5μA SS Shifter & latch R Q PWM logic SKIP control UV 15 DIP8(300mil) Block Diagram POR Vref Package UVLO, primary side PbyPOCP, secondary side timer type OCP Block Diagram VIN 7.62 DC-DC Converter (Control) ICs [Synchronous rectification type] UV_timeout 0 deg OSC 300kHz CT CF CT PC PC CLKO SGND SYNC. pulse out 5V 0V 16 Power Supply ICs for Single Lens Reflex Digital Cameras Power Supply ICs for Single Lens Reflex Digital Cameras LV5603T ■ Applications unit: mm unit: mm 9.0 6-channel switching regulator control IC 36 25 6.5 24 13 12 0.125 0.2 0.5 0.5 4.4 ● Low voltage (3V minimum) operation ● Reference voltage precision: ± 1% ● Built-in standby circuit ● Synchronous rectification: channels 1 and 2 ● 3-channel independent soft start 13 1 0.5 0.15 0.22 (0.5) 0.1 0.1 1.2max (1.0) (0.75) 12 1 1.5max 48 ■ Functions/Features 9.0 7.0 ■ Functions/Features 6.4 24 37 ● Low voltage (3V minimum) operation ● Reference voltage precision: ± 1% ● Independent standby function for each of the 6 channels ● Is capable of driving MOS transistors ● Synchronous rectification: channels 1 and 2 ● Supports inverting step-up operation 3-channel switching regulator control IC 0.5 7.0 (1.3) ■ Applications LV5655 SANYO: TQFP48J(7X7) Type Input voltage Output voltage Multiple power supply Programmable externally 3V to 15V SANYO: SSOP24(225mil) Channels Power stages Package Type 6ch (Step up 2, down 4) External TQFP48J(7×7) Multiple power supply Input voltage Output voltage Programmable externally 3V to 15V Channels Power stages Package 3ch (Step up 1, down 2) External SSOP24(225mil) Block Diagram Block Diagram to A to B to C to D to E to F 2 VREF 1 SCP VCC IN1- FB1 CSOFT1 IN2- FB2 CSOFT2 IN3- FB3 CSOFT3 IN4-RE FB4RE IN4- FB4 CSOFT4 IN5- FB5 CSOFT5 IN6- FB6 CSOFT6 GND CTL VBIAS - + CSOFT1 3 IN14 FB1 5 SCPOUT STBY6 OUT1N STBY4 SCP SCP STBY STBY3 SYN1 + + + + + + - + + - STBY1 0.022μF STBY2 VREF RT VREF 6 7 1μF VCC OSC CT OUT1 8 CSOFT2 IN2FB2 + + + - UT2 OUT2N VCC VBLAS OUT1 OUT1N OUT2 OUT2N VS OUT3 OUT4 OUT5 OUT6 SYN2 + + - + 22 OUT3 VO1=1.5V/ IO1=100mA VO2=2.5V/ IO2=100mA VO3=3.3V/ IO3=400mA VO4=7V/ IO4=10mA ON/OFF5 VO5=15V/ IO5=100mA ON/OFF6 VO6=12V/ IO6=100mA Lithium-ion X 2 (5V to 8.4V) 21 20 19 18 17 16 VS(PGND) 15 A B C D E F VBATT IN39 FB3 10 CSOFT2 11 SGND 17 23 + + - + + - + + - + + - + + - + + - STBY5 + - + + - 24 CTRL 12 RT 14 13 18 Power Supply ICs for Single Lens Reflex Digital Cameras LV5604T LV5621LP ■ Applications unit: mm 33 SIDE VIEW (0.125) 64 0.4 16 0.4 2.6 ● Low power dissipation ● Switching among 3 power sources (main battery, button battery, external power supply) ● LDO×3 (2.6V, 3.0V, 3.2V) ● Three voltage detection circuits (2.6V, 2.8V, 2.2V) 17 1 (C0.116) ■ Functions/Features 9.0 7.0 ■ Functions/Features BOTTOM VIEW 2.6 32 49 ● Low voltage (3V minimum) operation ● Reference voltage precision: ± 1% ● Independent standby function for each of the 8 channels ● Is capable of driving MOS transistors ● Synchronous rectification: channels 1 and 2 ● Supports inverting step-up operation TOP VIEW (0.13) 0.5 7.0 48 unit: mm For digital still cameras Switching IC between main and backup power supplies 9.0 0.125 0.16 2 (0.55) SIDE VIEW 1.2max 0.1 0.25 SANYO: TQFP64J(7X7) Type Input voltage Output voltage Multiple power supply Programmable externally 3V to 15V Channels Power stages Package 8ch (Step up 3, down 5) External TQFP64J(7×7) SANYO: VCT16(2.6X2.6) Input voltage VCC1: 2.7V to 4.8V Package VCC2: 3V VCC3: 3.5V to 5.2V VCT16(2.6×2.6) Block Diagram Applications For DSCs and game machines Block Diagram FB1A FB2A FB3A FB4A FB6A FB7A FB8A FB5A VOUT Lithium-ion/AC adapter LDO1 VIN (2.7 to 4.8V) VREF IN1- FB1 CSOFT1 IN2- FB2 CSOFT2 IN3- FB3 CSOFT3 IN4- FB4 CSOFT4 IN5-RE FB5RE IN5- IN5+RE FB5 CSOFT5 IN6- FB6 CSOFT6 IN7- FB7 CSOFT7 IN8- FB8 CSOFT8 CTL - + CTL CLK_OUT REG 3.2V 60mA VBATT Pch Voltage detection 2.6V Hysteresis width 40mV LDO3 VBOOST VBATT M1 REG 2.6V 30mA SW_VOUT Pch 10kΩ SW_ON SEL 200kΩ Pch Nch PULL_UPV SCP_OUT CT STBY OSC CLK_IN RT (NC) (NC) + + - + + - + + - + + - + + - + + - + + - + + - CLK PULL_UPON 22kΩ + + + + + + - + - + - BAT_OFF Signal system power supply VCC OUT1 OUT1N SYNC1 OUT2 OUT2N SYNC2 OUT3 Pre-output stage power supply VBIAS1 Voltage detection Set to low at 2.8V Set to high again at 2.9V SCP SCP SYNC1 L: Synchronous rectification H: Diode rectification SYNC2 L: Synchronous rectification H: Diode rectification OUT4 VBIAS2 OUT5 OUT6 OUT7 SEL_CH8 MODE Step-down; Connect to VBIAS Step-up; Connect to GND2 SEL_CH8 OUT8 GND_S GND_P(VS2) GND_P(VS1) STBY8 STBY7 STBY6 STBY5 STBY4 STBY3 STBY2 STBY1 Reset voltage detection 2.2V Hysteresis width 0.1V 22kΩ Nch RESET Delay circuit Nch LDO2 VCHG REG 3.0V 15mA 1.1kΩ BACK_CNT Input: LDO2 ON when H FB1A FB2A VBAT Step-down (DOWN) VO1 3.3V/100mA Step-down (DOWN) Step-down (DOWN) VO2 3.3V/100mA FB3A Step-down (DOWN) VO2 3.3V/100mA Inversion (INVENT) Step-up (UP) FB7A Step-up (UP) VO3 -4V/100mA FB6A FB8A Step-up (UP) FB4A FB5A ON/OFF setting ON/OFF setting ON/OFF setting 19 1 0.5 LASER MARKED INDEX 0.8 (1.0) (0.5) 16 8-channel switching regulator control IC (0.035) ■ Applications Power Supply Switching ICs GND DC_IN 600Ω DC_IN Channel 8 step-up/step-down is selected by SEL_CH8 20 Power ICs with a Watchdog Timer Function Rechargeable Battery Charge Control ICs LA5693AM/93D/93M 5.0 1 4 8 Absolute maximum ratings input voltage 41V 4 1.27 (1.5) 3.2 0.51MIN 2.54 0.5 0.1 (0.76) 0.15 0.35 1.7max (0.65) SANYO: DIP8(300mil) MFP8(225mil) DIP8(300mil) SANYO: MFP8(225mil) Function reset Watchdog time typ logic output (Ct=2μF) Package (LA5693AM) (LA5693D/93M) 0.63 0.25 (3.0) 3.9MAX 1 Total power dissipation 0.37W 0.5W 1.4 1.0 (LA5693AM/93M) (LA5693D) Inverted 10 6 1 5 ■ Functions/Features 4.4 6.4 6.4 ■ Functions/Features 5.0 5 0.63 5 7.62 8 40ms ● Built-in circuit that prevents system malfunction when the input voltage (car battery voltage) falls. ● Provides a constant voltage output that in proportion to the PWM input signal (permits output voltage control by microcontroller) ● High-precision reference current (current control amp) 92.5μA ± 2.7% ● Output voltage can be set through an external resistor. ● Each loop of the voltage amp and current amp is independent. Battery type Lithium-ion, nickel-metal hydride 6.4 9.14 ● An external PNP transistor can be used to provide a low-saturation voltage regulator ● Since the CK input has no edge detector, a high degree of flexibility is allowed in applications (LA5693AM) ● Variable detection voltage (LA5693AM) ● Watchdog time can be made longer (LA5693AM) ● 5V output voltage power supply controller (LA5693D/93M) ● Built-in watchdog timer (LA5693D/93M) ● Power supply reset signal generation function (LA5693D/93M) ● Reset hold output RES(2) (cleared with CK reinput) (LA5693D/93M) unit: mm DC-DC converter secondary side control IC 4.4 Microcontroller systems for use in automobiles and other industrial equipment ■ Applications unit: mm 1.7max unit: mm 0.15 0.1 (1.5) ■ Applications LA5636M 0.35 1.0 (0.5) SANYO: MFP10S(225mil) Absolute maximum ratings Input voltage Total power dissipation Package Functions/Features 14.5V 0.36W MFP10S(225mil) Car battery DC-DC converter control IC, output voltage proportional to PWM input signal for charging lithium-ion batteries, etc. Block Diagram Block Diagram VOUT IN VCC VO R8 390kΩ VCONT 1 Error AMP TR2 2SA1258 D1 DS135E R6 1.1kΩ R7 2.2kΩ TR3 2SC3031 R4 1kΩ R5 750kΩ R3 10kΩ Start Up VO Co 100μF 3 VDD 10kΩ VREF 6 RESET GENERATOR VOUT DETECTOR Batt 2 RES(1) + CPU VCC RES RES(2) WDT 3 5 R6 R8 Tr1 + Tr2 Tr3 Tr6 + 15kΩ 15kΩ 5 8 0.01μF R1 13kΩ 7 CK VS Tr4 Tr 5 4 GND Ct C ck 2 GND X1 R7 R9 + 2.0V R3 10kΩ R2 33kΩ X2 + - R4 R5 200kΩ 30kΩ Vref 2.5V ±1% + X4 R10 1.6kΩ Tr13 + X3 - X5 Tr8 Tr9 Tr10 Tr11 + Tr12 4 + 1.25V R11 GND GND R1 R2 1 ICONST Tr7 DO VSS V+IN V-IN C1 Isen+IN Isen-IN 7 6 10 9 8 DOUT PWM C in 10μF + 100kΩ + 12V/24V + Ct PWM GND A/D1 A/D2 Microcontroller 21 22 Dedicated Reset Function ICs LED Driver ICs LA5623M ■ Applications unit: mm 1.27 0.15 0.35 (1.0) 0.25 0.63 4 ● Four main LED driver circuits ● Supports two LED current modes ● Compact package ● Thermal shutdown function 2 SIDE VIEW 0.25 -0.3V to +12V 0.3W 0.0NOM 0.1 Package Functions/Features 2-system reset IC with built-in 1.25V, and 4.2V reference voltages, delay time 25ms, 50ms, 100ms, or 200ms switchable MFP8(225mil) 1 0.5 (0.5) SANYO: MFP8(225mil) Absolute maximum Total power ratings Input voltage dissipation 12 2 1 (0.8) (1.5) (0.65) Exposed Die-Pad Do Not Connect ■ Functions/Features 1.7max 1 BOTTOM VIEW SIDE VIEW 2.0 4.4 6.4 ■ Functions/Features ● Reset circuit (output 1) that detects the input voltage and provides a delay time of 200μs ● System reset circuit with switchable delay time of 25ms, 50ms, 100ms, and 200ms (output 2) Low minimum operating voltage ● ● Both reset 1 and reset 2 have hysteresis characteristics TOP VIEW 5 2.0 8 unit: mm LED driver for use in cell phones 5.0 (1.0) Combination system reset IC 0.85MAX ■ Applications LV5215LF SANYO: VQFN12(2.0X2.0) Input voltage Channels Package Circuit Functions and Applications 3.0V to 4.5V 4ch VQFN12(2.0×2.0) LED driver for use in cell phones Block Diagram Block Diagram VCC 7 10kΩ MLED1 VREF 1.25V VBAT ILED VCC1 MLED2 MLED3 MLED4 VCC 6 OUT1 + INPUT 2 LED DRIVER 10kΩ VREF 4.2V + OSC - Divider circuit Drive block IREF 5 OUT2 SWI Reset circuit SWO R2 11kΩ 23 8 4 1 3 MANUAL RESET GND Ct0 Ct1 RT CTL GND IRT Multiplexer IF R1 110kΩ 24 LED Driver ICs LV5217GP MEMO ■ Applications unit: mm 3-channel LED driver for cell phones TOP VIEW SIDE VIEW BOTTOM VIEW (0.125) (0.13) 2.6 (C0.116) ● Three color LED driver circuits ● The LED current can be switched independently in 7-bit units (0.31 to 25.48mA) ● Independent on/off control of three LED drivers (independent control of the 3 RGB colors) ● Each LED driver current level can be adjusted independently over the I2C bus ● Compact package ● Thermal shutdown circuit Input voltage Channels Package 3.0V to 4.5V 3ch VCT16(2.6×2.6) 16 0.4 2.6 ■ Functions/Features 2 1 0.5 LASER MARKED INDEX (0.55) 0.8 SIDE VIEW (0.035) 0.25 SANYO: VCT16(2.6X2.6) Circuit functions and applications 3-channel LED driver for cell phones Block Diagram VBAT VDD NC11 NC10 SCL1 12 11 10 9 STBY 13 RLED Interface level shifters 14 8 SDAI 7 VCC 6 NC6 5 NC5 Serial bus interface GLED BLED 15 16 IREF 1 2 TEST 3 GND 4 RT LEDON 56kΩ 25 26 Ordering number : EP91G SANYO Semiconductor Co.,Ltd. Website http://www.semic.sanyo.co.jp/index_e.htm This catalog provides information as of June, 2008. Specifications and information herein are subject to change without notice. SANYO Semiconductor Co., Ltd.