Download Red Digital Cinema Red One 17.0 Operation Guide

Blue Gain: adjusts the gain of the BLUE channel only. Range is 0.0 (no Blue) to +4.0
Green Gain: adjusts the gain of the GREEN channel only. Range is 0.0 (no Green) to +4.0
TONE menu
The TONE sub-menu allows a Tonal Response Curve to be overlaid on the video monitor path.
The curves parameter values are stored in metadata, and may be visualized in RED Alert!™
post-production software as Curve data.
Curve: This checkbox enables the Tonal Response Curve. Default setting is enabled.
Define: Selects the curve control point to be adjusted - Black, Toe, Center, Knee or White.
Each control point comprises two independent values, one each for X and Y-axis locations.
X: Adjusts the location of a control point along the X-axis on the tonal response curve.
Y: Adjust the location of a control point along the Y-axis on the tonal response curve.
Viewfinder Menu
This menu permits the operator to adjust operation of the viewfinder.
Color: When checked, forces the RED-EVF and RED-LCD outputs to monochrome or a false
color exposure assist or Edge Highlight
In Monochrome, the color component of the image is removed.
In False Color the color component of the image is replaced by an overlay of colored bands
representing the exposure levels with the image. Bluer colors represent underexposed areas,
green is 18% ND, yellow and red colors represent more exposed areas.
36
Copyright RED Digital Cinema
Apr 30 2009