Download Quantum DX30 User's Guide

Transcript
Appendix A Configuring the SNMP Management Web Page
DX-Series
In the Trap Destination field, enter the IP address where the
OpenView NNM is running.
e
Note:
At least one trap destination must be specified.
5 Click Apply to save your changes.
SNMP integration with OpenView NNM is complete.
DX-Series
1
To configure the SNMP Management Web Page in Unicenter TND or
OpenView NNM:
1 Access the Library Home Page and configure the SNMP page.
•
In Unicenter TND, from the 2-D Map, right-click on the library
icon and click on Library Home page from the pop-up menu.
•
In OpenView NNM, select the library node, click on Tools and
select Web Browser, Server Home Page.
2 A password dialog box displays.
Enter your administrator or operator user name and password and
click OK.
The Home page displays.
3 Click on Remote Alerts, then SNMP.
The SNMP page displays (see figure 23)..
SNMP Integration Guide
37