Transcript
Read This First IMPORTANT: Read this before operating this Rackmount device. This unit has preventive measures built in to the power button on the front panel to eliminate inadvertent power cycling of the device. To turn ON the unit, follow these steps: 1 Press and HOLD the power button on the front panel for one second. 2 The power LED illuminates, indicating that the unit has turned on. To turn OFF the unit, follow these steps: 1 Press and HOLD the power button on the front panel for approximately three seconds. 2 When the power LED goes off, the unit has turned off. Power button Power LED © Copyright 2006 by Quantum Corporation. All rights reserved. Quantum, DLT, DLTtape, the Quantum logo, and the DLTtape logo are all registered trademarks of Quantum Corporation. SDLT and Super DLTtape are trademarks of Quantum Corporation. Other trademarks may be mentioned herein which belong to other companies. January 2006 *81-81234-04 A01* 81-81234-04 A01
