Download ProScan PLD3283C User's Manual

PLD3283C
32
4.3.Customizing theTIME Settings
4.4.Customizing the SETUP Settings
4.5.Customizing the Patental Settings
4.6.Customizing the TV Settings
TV Base Stand assemble
PC Mode
20
21
24
27
30
31
33
Initial Setup
3.1. Initial Installation
3.2. Audio/Video Source Selection
3.3. DTV Mode Operations
SETTINGS
4.1.Customizing the PICTUERE Settings
4.2.Customizing the Audio Settings
17
17
17
18
18
19
TV Base Stand assemble
3.Mounting on the wall
This unit is VESA-complian,and is designed to be wall-mounted
with a VESA-compliant 4"x10"(101.6mmx254mm)mounting kit
designde for flat-panel TVs(not supplied).Mount this unit according
to the instructions included in the monting kit. Length of screw should
not exceed 8 mm
NOTE
Remove the base stand before mounting the unit on the wall.
4"
10 "
Four mounting holes
(size M4 screw)
USB
(For Service)
R
Audio in
L
VIDEO
Pr
Pb
Y
RF
COAXIAL
HDMI1
1. Headphones
2. Coaxial: Digtial audio output
3. HDMI
4. VGA: PC video input
5. PC AUDIO: Connect it to the
audio output terminal of PC
HDMI2
VGA
PC AUDIO
6. RF: Antenna connection
7. YPbPr: Connect to the YPbPr
video output terminal of DVD
8. Video: Video input
9. AUDIO IN R/L: Stereo audio input
10. USB Host port (For Service)
sound from speakers
ASPECTSelectsthescreensize
UniversalRemote Code:08F7
(Universal Rmote Control is not included)
adaptor
USB
(For Service)
R
Audio in
L
VIDEO
Pr
Pb
Y
RF
USB
(For Service)
R
USB
(For Service)
Audio in
L
R
VIDEO
Audio in
L
Pr
VIDEO
Pb
Pr
Y
Pb
Y
RF
RF
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
Note:Coaxial output
COAXIAL
HDMI1
HDMI2
VGA
PC AUDIO
4.1. Customizing the PICTURE
3. Initial Setup
3.1. Initial Installation
The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the PICTURE.
, use the Ż/Ź
to
3. Use the Ÿ/ź bu ons to highlight an individual PICTURE
and press the MENU
to exit the menu.
change the se
3.2. Audio/Video Source Selection
Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons
/
to select the desired source
depending on the equipment you have connected (AV,
HDMI, VGA) or choose TV to enter these mode.
The PICTURE menu includes the following
3.3. DTT Mode Operations
Picture Mode
Cycle among picture display modes: Standard, Dynamic, Mild, user.
Contrast
Control the diīerence between the brightness and darkest regions of the
picture.
Brightness
Control the overall brightness of the picture.
Color
Control the color.
Tint
Controls the nt.
Sharpness
Increase this se ng to see crisp edges in the picture; decrease it for so
edges.
Color Temp.
Cycles among color modes: Normal, Warm, Cool.
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV and radio channels (press the
/
buttons to sort by group and
show only the DTV, the analog TV channels, Radio channels, etc.).
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.
4. SETTINGS
17
:
18
4.2. Customizing the Audio
4.3. Customizing the TIMER Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the AUDIO.
3. Use the Ÿ/ź bu ons to highlight an individual AUDIO
, use the Ż/Ź
to
change the se
and press the MENU
to exit the menu.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the TIMER.
3. Use the Ÿ/ź bu ons to highlight an individual TIMER
, use the Ż/Ź
to
and press the MENU
to exit.
change the se
The AUDIO menu includes the following op ons:
The TIMER menu includes the following op ons:
Sound Mode
Allow you to select among: Standard, Music, Movie and User.
Bass
Control the rela ve intensity of lower pitched sounds.
Treble
Control the rela ve intensity of higher pitched sounds.
Balance
To adjust the balance of the le and right sound track, or turn oī the volume
of the le and right sound track.
Surround
Allow you to select between Oī and On.
SPDIF Type
Allow you to select between PCM and RAW.
Audio Language
Allow you to select audio language among: English, French and Spanish.
19
Sleep Timer
Allow you to set up the sleep
among: 5min, 10min, 15min,
30min,45min, 60min, 90min, 120min, 180min, 240min and oī.
Time Zone
Allow you to set up the sleep
Eastern, Central and Mountain.
Daylight Saving Time
Allow you to turn on or oī the daylight saving
20
among: PaciĮc, Alaska, Hawaii,
4.4. Customizing the SETUP Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the SETUP.
, use the Ż/Ź
to
3. Use the Ÿ/ź bu ons to highlight an individual SETUP
change the se
and press the MENU
to exit.
H-Posi on
V-Posi on
Clock
Phase
Auto
Close Cap on
The TIMER menu includes the following op ons:
Menu Language
Allow you to select menu language among: English, Français and Español.
Transparency
Allow you to turn on or oī the transparency
Zoom Mode
Allow you to select the zoom mode among: Wide, Zoom, Cinema and
Normal.
Noise Re
Advance
on
Allow you to select the noise re
Kī͕tĞĂŬ͘
Allow you to use the Ż/Ź bu ons to adjust the H Posi on.
Allow you to use the Ż/Ź bu ons to adjust the V Posi on.
Allow you to prolong the image.
Allow you to adjust the de
Select “Auto” and press the Ź bu on, the unit will
automa
adjust all items to achieve a best eīect.
Use the ź bu on to highlight the Close
bu on to enter into the following menu.
n item, then press the Ź
on mode among: Middle, Strong,
Input PC signal Įrst, then press SOURCE bu on to select VGA mode, press Ź
bu on to conĮrm.
CC Mode
Basic
Advanced
Op
21
Allow you to select the CC Mode among: Oī, On and CC
on Mute.
Allow you to select the basic sel on among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3 and Text4.
Allow you to select the advanced sel on among:
Service1, Service2, Service3, Service4, Service 5 and
Service6.
Use the ź bu on to highlight the “Op on” item, then
press the Ź bu on to enter into the following menu.
22
4.5. Customizing the LOCK Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the LOCK.
3. Use the ź bu on to highlight “Enter Password” item, use the numeric keys to input 4-digital
ngs, press menu
password. A er you that, the screen will display the junior menu. A er
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
Use the Ÿ/ź bu ons to highlight the desired item, and
use the Ż/Ź bu ons to select.
Input
4-digital password
XVS
To turn on or oī the XVS fun on.
Restore Default
Restore all se ngs in SETUP menu to factory se ngs.
The LOCK menu includes the following op ons:
Change Password
Use the ź bu on to select the “Change Password” item, then press the
Ź bu on to enter into the following menu.
Input the new 4-digital password and input it again to conĮrm.
System Lock
23
Allow you to turn on or oī the system lock.
If you turn oī the system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.
24
US
Use the ź bu on to highlight the “US” item, then press the Ź bu
enter into the following menu.
n to
Canada
TV
Use theź bu on to highlight the “Canada” item, then press Ź bu on to
enter into the following menu.
Use the ź bu on to highlight the “TV” item, then press
Ź bu on to enter into the following menu.
Canada Eng
Use the Ż/Ź bu ons to select among: E, C, C8+, G,
PG, 14+ and 18+.
Canada Fre
Use the Ż/Ź bu ons to select among: E, G, 8ans+,
13ans+, 16ans+ and 18ans+.
RRT Se ng
Reset RRT
Allow you to reset the RRT se ng.
Use the Ÿ/ź bu ons to select the desired ra ng and
press the Ź bu on to block or unblock ra ng.
MPAA
The Movie ra ng (MPAA) is used for original movies rated
by the Mo
Picture Associa on (MPAA) as broadcasted
on cable TV and not edited for television.
Use the Ÿ/ź bu ons to select N/A, G, PG, PG-13, R,
NC-17 or X.
RATING
DESCRIPTION
G
General Audiences. Movie is appropriate for
all ages.
PG
Parental Guidance Suggested. May contain
material not suited for younger viewers
PG-13
Contains content that may not be
appropriate for viewers under the age of 13.
R
Restricted. Contains adult content, no one
under 17 admi d without parent.
NC-17
No one 17 and under admi
X
Adults only.
2
25
2
26
4.6. Customizing the CHANNEL Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the CHANNEL.
, use the Ż/Ź
to
3. Use the Ÿ/ź bu ons to highlight an individual CHANNEL
change the se
and press the MENU
to exit.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
If you select “Cable” as input signal in Antenna item, allows you to select
Cable System among: Auto, STD, IRC and HRC.
Use the ź bu on to highlight the “Start to Scan”, then press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
The CHANNEL menu includes the following
:
Air/Cable
Allows you to select antenna between Air and Cable.
If you select “Cable”, the following items (Favorite, Show/Hide, Channel
NO., Channel Label and DTV Signal) are unable to use.
Auto Scan
Use the ź bu on to highlight the “Auto Scan” item, then press Ź bu on
to enter into the following menu.
Favorite
Allow you t add these channels which you desired as the favorite
channels. Use the Ÿ/ź bu ons to highlight the “Favorite” item, then
press the Ź bu on to enter into the following menu.
Use the Ÿ/ź bu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
If you select “Air” as input signal in Antenna item, you can press the Ź
bu on to search the channels automa cally.
27
Show/Hide
Allow you to show or hide the channels.
Use the Ÿ/ź bu ons to highlight the “Show/Hide” item, then press the
Ź bu on to enter into the following menu.
28
5. PC Mode
Se ng up your PC so ware (based on Windows XP)
The Windows display-se ngs for a typical computer are shown below. But the actual screen on
your PC will probably be diīerent, depending upon your par cular version of Windows and your
par cular video card. But even if your actual screen looks diīerent, the same, basic set-up
informa on will apply in almost all cases.
Use the Ÿ/ź bu ons to highlight the desired item, then press OK
bu on to show or hide the highlighted channel.
Channel No.
Display the number of current channel.
Channel Label
Display the lable of current channel.
DTV Signal
Display the quality of current DTV signal.
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box will
appear.
4. Navigate to the “Se ng” tab on the display dialog-box. The correct size se ng (res
Op
1360×768.
on exists on your display se ngs dialog box, the correct value is “60Hz”.
If a ver cal-frequency
Otherwise, just click “Enter” and exit the dialog box.
Horizontal
Frequency (KHz)
Frequency (Hz)
720x400
31.47
70
DOS
640x480
37.9
60
VGA
Res
29
n
Standard Mode
800x600
37.9
60
SVGA
1024x768
48.4
60
XVGA
1366x768
64
60
SXVGA
6
TV
TV
TV
7
PLD3283C
1366 x 768
70W
AC 100-230V~, 50/60Hz
x2
USB(For service)
and