1
Download Pfaff 574 User's Manual
Transcript
Adjustment 1.04.13 Height of the feed wheel (on the PFAFF 591) 61-039 0,8 mm Requirement The feed wheel should protrude from the needle plate by tooth height (approx. 0.8 mm) 1 2 61-035 3 Fig. 1 - 13 ● Swing out the roller presser. ● Loosen screws 1. ● Adjust eccentric 3 (fastening screw accessible through hole 2) according to the requirement. ● Tighten screws 1. 22
