1
Download Panasonic AK-HC3500 Menu Information
Transcript
Panasonic Broadcast AK-HC3500 Menu Information Menu operations Entering the menu data Basic setting menu operations After accessing the item menus, enter the respective data. Displaying the menus 1Turn the JOG dial to select the menu item to be set. User menu 1Press the MENU switch. The camera’s USER menu screen now appears on the viewfinder or monitor. 2When the JOG dial is pressed, the setting of the item indicated by the arrow flashes. 2 Turn the JOG dial to select the menu item. 3After having selected the item, press the JOG dial to access that item’s menu. 3 Turn the JOG dial to change the setting. 4 When the JOG dial is pressed, the data is entered. Note Bear in mind that if, in step 3, the MENU switch is set to OFF while the setting is flashing, the setting prior to the flashing will remain unchanged. 25 Menu operations Entering the menu data (continued) When the setting flashes one character at a time, press the JOG dial to move the flashing toward the right. 1When the JOG dial is pressed, flashing moves toward the right. 2 Turn the JOG dial to change the setting. 3 When the JOG dial is now pressed, the data is entered. 26 Setting menu configuration Hierarchical menus USER MENU 27 Setting menu configuration Hierarchical menus USER MENU 28 Setting menu configuration Hierarchical menus USER MENU 29 Setting menu configuration Hierarchical menus USER MENU 30 Setting menu configuration Hierarchical menus USER MENU 31 Table of adjustment setting ranges Operation Menu VF Setting1 VF Setting2 Item Side Modu SW OFF, ON OFF Side Modu LVL 0 to 31 31 Zone Mark OFF, 4:3, 13:9, 14:9, 15:9, 16:9 OFF Safety Mark1 Safety Area1 Safety Mark2 Safety Area2 Center Mark Center Mark SEL Line Width Marker Level VF DTL 16:9, 15:9, 14:9, 13:9, 4:3, OFF 80 %, 90 %, 93 %, 100 % 16:9, 15:9, 14:9, 13:9, 4:3, OFF 80 %, 90 %, 93 %, 100 % OFF, ON 1 to 4 1 to 3 100 %, 75 %, 50 % 0 to 23 12.4M, 12.5M, 12.7M, 12.9M, 13.0M, 13.3M, 13.6M, 13.9M, 14.2M, 14.6M, 15.0M, 15.5M, 16.1M, 16.7M, 17.3M, 18.0M, 18.6M, 18.8M, 19.0M, 19.2M, 19.5M, 19.9M, 20.3M, 20.9M, 21.5M, 22.4M, 23.6M, 25.4M, 28.6M, 37.1M 0 to 5 0 to 63 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 0 to 5 0 to 63 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 0 to 5 0 to 63 OFF, ON ADJ, 1, 2, 1+2 0 to 255 0 to 255 0 to 255 0 to 255 BOX, CROSS MEM1, MEM2 NO?, YES? OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON, AUTO LOW, NORM OFF, ON OFF, ON — OFF 93 % OFF 80 % OFF 1 2 100 % 10 Items recorded on SD memory cards No switching from the SD memory card to the camera settings possible while the buildup unit is connected. No switching from the SD memory card to the camera settings possible while the buildup unit is connected. No switching from the SD memory card to the camera settings possible while the buildup unit is connected. 12.4M 0 0 6.8M 0 0 6.8M 0 0 OFF ADJ 127 127 127 127 BOX MEM1 NO? OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON NORM OFF OFF — HD Peak FREQ Cursor VF Display1 VF Display2 Setting1 HD Offset Gain HD Crisp D1 Peak FREQ D1 Offset Gain D1 Crisp VBS Peak FREQ VBS Offset Gain VBS Crisp Cursor Cursor Memory H Position V Position Width Height BOX/CROSS Store Memory EXECUTE F Number Zoom Focus Extender MONI OUT Filter M Gain Shutter 5600K Audio Level OPT Level RET Select Status Status(AUTO) Field Rate Voltage WFM (*1) White CH FAN Power FAN Mode CALL+R_TALLY CALL+T_TALLY PinP Mode Adjustment setting range Initial value *1: W aveforms are displayed as a single line at the center of the screen. They appear at the bottom right when the aspect ratio is set to 16:9, but when an aspect ratio of 4:3 is set on the viewfinder or when the side panel mode is selected by the down-converter, the waveform display will be cut off in part. 32 Table of adjustment setting ranges Menu Setting1 Setting2 Setting3 Setting4 !LED 7"VF INCOM Set.1 INCOM Set.2 MIC Gain Item HD-SDI2 OUT HD-SDI2 Power AUX I/O TRUNK1 TRUNK2 5600K HND GRIP RET HND GRIP PTT HND Lens VTR HND Lens RET STD Lens RET1 STD Lens RET2 EXT RET 1 EXT RET 2 EXT RET 3 RET1 ID RET2 ID RET3 ID RET4 ID Gain SW LOW Gain SW MID Gain SW HIGH ID Character User SW1 User SW2 User SW3 User B/U Back Light RET Mode Lens I/F B/U Lens Rear ROP VR Gamma Off Shutter Extender MONI OUT FAN Off Master Gain Black Gamma VF FAN Speed Peak Slice Peak FREQ INC1 MIC Type INC1 MIC Gain INC1 MIC Power INC1 Side Tone INC1 PGM MIX INC1 ENG/PROD INC1 to CCU INC2 MIC Type INC2 MIC Gain INC2 MIC Power INC2 Side Tone INC2 PGM MIX INC2 ENG/PROD CRANE MIC Gain CRANE Side Tone CRANE ENG/PROD CRANE to CCU MIC1 Gain MIC1 AMP MIC2 Gain MIC2 AMP Adjustment setting range MAIN, VF, RET ACTIVE, SAVE RET Y IN, PMT2 OUT, VBS OUT, D1 OUT RS422, RS232C RS422, RS232C OFF, ON A, B, PTT PTT, A, B VTR, A, B, PTT A, B A, B A, B A, B A, B A, B Enables a name (5 characters) to be set. Enables a name (5 characters) to be set. Enables a name (5 characters) to be set. Enables a name (5 characters) to be set. –6 dB to 36 dB (in 3 dB increments) –6 dB to 36 dB (in 3 dB increments) –6 dB to 36 dB (in 3 dB increments) Enables a name (10 characters) to be set. A, B, PTT, DISP, MARK OFF (*2) A, B, PTT, DISP, MARK OFF A, B, PTT, DISP, MARK OFF A, B, PTT, DISP, MARK OFF, LENS EXT 1 to 70 NORM, TOGGLE, SEQ. Analog, Serial PORTABLE, BOX CAM, CCU OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON NORM, LOW OFF, LOW, MID, HIGH 8 MHz, 15 MHz DYN, ECM, CBN –12 dB to +12 dB (in 3 dB increments) OFF, ON OFF, –36 dB to 0 dB (in 3 dB increments) OFF, ON ENG, PROD OFF, ON DYN, ECM, CBN –12 dB to +12 dB (in 3 dB increments) OFF, ON OFF, –36 dB to 0 dB (in 3 dB increments) OFF, ON ENG, PROD –12 dB to +12 dB (in 3 dB increments) OFF, –36 dB to 0 dB (in 3 dB increments) ENG, PROD OFF, ON 20 dB, 40 dB, 60 dB –20 dB to 20 dB (in 1 dB increments) 20 dB, 40 dB, 60 dB –20 dB to 20 dB (in 1 dB increments) Initial value VF ACTIVE RET Y IN RS422 RS422 OFF A PTT B A A B A B B RET1 RET2 RET3 RET4 0 dB 6 dB 12 dB — A PTT PTT PTT 20 NORM Analog BOX CAM OFF OFF OFF OFF OFF OFF OFF NORM OFF 8 MHz DYN 0 dB OFF OFF ON ENG ON DYN 0 dB OFF OFF ON ENG 0 dB OFF ENG ON 20 dB 0 dB 20 dB 0 dB Items recorded on SD memory cards *2: DISP: At the DISP setting, the character display is forcibly set to OFF while the user switch is pressed. MARK OFF:At the MARK OFF setting, ZONE, SAFETY, CURSOR, CENTER and WFM are forcibly set to OFF while the user switch is pressed. 33 Table of adjustment setting ranges Painting Menu Setting SW BlackShading Black/Gain White SHD Gamma Knee/W.Clip Item Flare Black Gamma Gamma Knee White Clip Matrix Preset Matrix DTL Skin Tone DTL DRS SW (*3) Correct H SAW R/G/B H PARA R/G/B V SAW R/G/B V PARA R/G/B AUTO V.SAW PED M PED R PED B Flare Flare R Flare G Flare B Gain R Gain G Gain B Correct H SAW R/G/B H PARA R/G/B V SAW R/G/B V PARA R/G/B Gamma Gamma M Gamma R Gamma B Black Gamma Black Gamma M Black Gamma R Black Gamma B DRS SW Effect Depth Initial Gain Knee Knee Point M Knee Point R Knee Point B Knee Slope M Knee Slope R Knee Slope B White Clip White Clip M White Clip R White Clip B Adjustment setting range OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON NORM, EBU, NTSC OFF, ON OFF, ON OFF, ON OFF, ON –100 to +100 –100 to +100 –100 to +100 –100 to +100 — –99 to +99 –800 to +800 –800 to +800 OFF, ON –100 to +100 –100 to +100 –100 to +100 –800 to +800 –800 to +800 –800 to +800 OFF, ON –100 to +100 –100 to +100 –100 to +100 –100 to +100 OFF, ON 0.600 to 0.300 –75 to +75 –75 to +75 OFF, ON –32 to +32 –20 to +20 –20 to +20 OFF, ON 1 to 5 4.0, 4.5, 5.0 OFF, ON 110 % to 80 % –20 to +20 –20 to +20 0 to 199 –31 to +31 –31 to +31 OFF, ON 109 % to 80 % –15 % to +15 % –15 % to +15 % *3: The image will be disturbed for an instant when the DRS function setting is changed. 34 Initial value ON OFF ON OFF OFF OFF NORM ON OFF OFF ON 0 0 0 0 — 0 0 0 ON 0 0 0 0 0 0 ON 0 0 0 0 ON 0.450 0 0 OFF 0 0 0 OFF 5 4.5 OFF 95 % 0 0 100 0 0 OFF 109 % 0 0 Table of adjustment setting ranges Menu Linear Matrix Color Correct1 Color Correct2 Detail1 Detail2 Item Matrix Linear 12axes R-G R-B G-R G-B B-R B-G Matrix Linear 12axes G Satu G Phase G_Cy Satu G_Cy Phase Cy Satu Cy Phase Cy_B Satu Cy_B Phase B Satu B Phase B_Mg Satu B_Mg Phase Matrix Linear 12axes Mg Satu Mg Phase Mg_R Satu Mg_R Phase R Satu R Phase R_Ye Satu R_Ye Phase Ye Satu Ye Phase Ye_G Satu Ye_G Phase V DTL H DTL Crisp Peak FREQ Level Dep. Dark DTL Corner DTL DTL_Source DTL_Clip+ DTL_Clip– DTL_Knee+ DTL_Knee– Knee DTL Adjustment setting range OFF, ON OFF, A, B OFF, A, B –31 to +31 –31 to +31 –31 to +31 –31 to +31 –31 to +31 –31 to +31 OFF, ON OFF, A, B OFF, A, B –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 OFF, ON OFF, A, B OFF, A, B –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 –128 to +127 0 to 63 0 to 63 0 to 63 12.4 MHz to 37.1 MHz 0 % to 30 % 0 to 7 0 to 31 2G+B+R, R, B, R+B, G, R+G, G+B, R+G+B 0 to 63 0 to 63 0 to 15 0 to 15 0 to 39 35 Initial value OFF A A 0 0 0 0 0 0 OFF A A 0 0 0 0 0 0 0 0 0 0 0 0 OFF A A 0 0 0 0 0 0 0 0 0 0 0 0 22 22 10 23.6 MHz 0% 0 0 R+G 0 0 0 0 0 Table of adjustment setting ranges Menu Skin Tone Detail1 Skin Tone Detail2 Item Skin Tone DTL Skin Tone Get Skin Tone Get MEM Select Cursor H Cursor V Cursor ZEBRA Effect MEM Skin Tone DTL MEM A Skin Tone Crisp Phase Width Saturation MEM B Skin Tone Crisp Phase Width Saturation Adjustment setting range OFF, ON EXECUTE (execution items) CANCEL (execution items) A, B OFF, ON 1 to 1920 1 to 540 OFF, A, B, A+B A, B, A+B OFF, ON — –63 to 0 to +63 0 to 359 0 to 255 0 to 255 — –63 to 0 to +63 0 to 359 0 to 255 0 to 255 36 Initial value OFF EXECUTE CANCEL A OFF 960 270 OFF A+B OFF — 0 0 0 0 — 0 0 0 0 Table of adjustment setting ranges Maintenance Menu Date / Time (*4) SD Card Scene File Item Adjustment setting range (Display item) NO?, YES? 24H, 12H Year Month Day Day of week Hours Minutes Seconds NO?, YES? NO?, YES? FORMAT, LOAD, STORE 1 to 8 NO?, YES? LOAD, STORE OFF, 1 to 8 (when LOAD is selected) 1 to 8 (when STORE is selected) NO?, YES? LOAD, STORE OFF, 01 to 16 (when LOAD is selected) 01 to 16 (when STORE is selected) Enables a name (8 characters) to be set. NO?, YES? –100 to +100 –100 to +100 –100 to +100 –100 to +100 –100 to +100 –100 to +100 –100 to +100 –100 to +100 –100 to +100 –100 to +100 NO?, YES? NO?, YES? — OFF, ON 1 to 8 (*6) 0 to 100 0 to 100 NORMAL, (3/4), (2/4), (1/4) 1 to 25 NORMAL, ON –40 to +40 Present Adjust 12H, 24H Date YY Date MM Date DD Date aaa Time HH Time NN Time SS Set Exe Reset Mode File No. EXECUTE Mode File No Lens File EXECUTE Mode File No Lens Edit Option (*5) Iris Cont. File Name EXECUTE Gain R Gain G Gain B Flare R Flare G Flare B W H SAW R/G/B W H PARA R/G/B W V SAW R/G/B W V PARA R/G/B Store? Cancel? — Auto Iris Window Select Iris Level Peak Ratio A.Iris Range A.Iris Speed LensExtComp.SW LensExtComp.LVL *4: If the date and time have not been set properly, the time may not be updated properly. The clock has an error which may cause it to gain or lose up to one minute per month. *5: The menu displayed differs depending on the type of option board installed. *6: The types of windows which can be selected are as shown in the figure below. 1 2 3 4 5 6 7 8 37 Initial value (Current date/time) NO? 12H (Current year) (Current month) (Current day) (Current day of week) (Current hours) (Current minutes) (Current seconds) NO? NO? LOAD 1 NO? LOAD 1 NO? LOAD 01 (Filename) NO? 0 0 0 0 0 0 0 0 0 0 NO? NO? — OFF 1 50 60 NORMAL 15 NORMAL 0 Table of adjustment setting ranges Menu CINE Gamma Item Cinema Gamma SW Cinema Gamma SEL Black STR LVL Dynamic LVL Knee Point Knee Slope ASU Tally Guard G/L Shutter Filter Setup Mode REF File M-PED Target ASU Execute Tally Guard H Phase Coarse H Phase Fine SD-HD Phase CRS SD-HD Phase Fine HD-SD Phase CRS HD-SD Phase Fine SD-HD V Phase SC Coarse SC Fine SC-H Coarse SC-H Fine Shutter SYNCHRO Mode Adjustment setting range OFF, ON VIDEO_REC, FILM_REC 0 to +30 200 %, 300 %, 400 %, 500 % +30 to +90 150 %, 200 %, 250 %, 300 %, 350 %, 400 %, 450 %, 500 %, 550 %, 600 % REF, CURRENT FULL (standard), EASY (simplified) Factory, User1, User2, User3 0.0 % to 7.5 % (execution items) OFF, ON –60 to +60 (during HD signal genlock) –120 to +120 (during SD signal genlock) –45 to +45 –4 to +4 –99 to +99 –8 to +8 –99 to +99 HD, SD 0 to 7 –255 to +255 0 to 7 –255 to +255 OFF, ON OFF, ON Fixed at SHUTTER When SHUTTER is ON, SYNCHRO is OFF 100/125/250/500/1000/2000 Initial value OFF VIDEO_REC +30 200 % +30 When SHUTTER is ON, SYNCHRO is ON 60.9 Hz to 99.8 Hz When SHUTTER is ON, SYNCHRO is ON: 60.9 When SHUTTER is OFF, SYNCHRO is ON 60.9 Hz to 99.8 Hz When SHUTTER is OFF, SYNCHRO is ON: 60.9 When SHUTTER is OFF, SYNCHRO is OFF 100/125/250/500/1000/2000 (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) 50 i, 59.94 i When SHUTTER is OFF, SYNCHRO is OFF: 100 (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) 59.94 i 150 % REF FULL Factory 5.0 % READY? OFF 0 0 0 0 0 0 SD 0 0 0 0 OFF OFF SHUTTER When SHUTTER is ON, SYNCHRO is OFF: 100 Speed ROM Version PLD Version Format CAM B, U (*7) TG SHD MEM RET VF AUX CAMSYS OPTION Present Format *7: This is displayed when the buildup unit is connected. 38 SD memory card operations These operations are performed on the SD Card page on the Maintenance menu. The VF display settings and camera function settings on the Operation menu can be recorded on the SD memory card. For details on what items are stored in the memory of the SD memory card, refer to “Table of the adjustment setting ranges.” Mode: SD memory card operation mode setting Select the SD memory card operation here. Setting range: FORMAT, LOAD, STORE FILE No.: File selection Select the number of the file to be loaded or stored here. Setting range: 1 to 8 The files on the SD memory card have filenames which range from “3500cm01.dat” for File No.1 to “3500cm08.dat” for File No.8. The SD memory card may not work properly if files have been edited using a personal computer or other device. EXECUTE The item set in “Mode” is executed here. When the arrow cursor () is moved to EXECUTE and the JOG dial button is pressed, “No?” appears. When the dial button is turned, “Yes?” appears. When the dial button is pressed while “Yes?” is displayed, the selected operation is executed. Conversely, when it is pressed while “No?” is displayed, the selected operation is canceled. 39
