Download Olympus C-5050 Reference Manual

Connecting the camera to the computer
3
Turn the camera on.
Camera with a lens barrier
The power turns on automatically,
with the exception of some models
which require you to press the
(monitor) button.
When the camera is turned on, the
green lamp on the right of the
viewfinder lights up.
Camera with a
mode
Set the mode dial to
. (If
the camera has a power
switch as well as a mode dial,
turn the power switch to ON.)
Lamp
Lens barrier
(monitor) button
Mode dial
Power switch
4
Mode dial
Power
switch
Macintosh
Camera with a
mode
(Camera setup/connection
mode)
Set the mode dial to
to turn
the camera on.
The computer recognizes the
camera as a new device.
The computer recognizes the camera
automatically and an “Untitled” icon
appears on the desktop.
If you cannot find this icon, turn off the camera and connect again.
Mac OS X
When the computer has recognized the camera, the Apple Image
p.29
Capture software automatically launches.
When the camera is connected to the computer, none of the camera buttons
are functional.
25