Download Nortel Networks 24T User's Manual

Introduction to the BayStack 410-24T Switch
Trunk Configuration Screen for Switch S4
As shown in Figure 1-40, switch S4 is set up with one trunk configuration (T5).
This trunk connects directly to switch S1.
As in the previous screen examples, to set up a trunk configuration choose
MultiLink Trunk Configuration from the MultiLink Trunk Configuration Menu
screen.
Figure 1-45 shows the MultiLink Trunk Configuration screen for switch S4.
MultiLink Trunk Configuration
Trunk
----1
2
3
4
5
6
Trunk Members (Unit/Port)
STP Learning
Trunk Mode
Trunk Status
------------------------------- ------------ --------------- -----------[ /5 ][ /11 ][ /
][ /
] [ Normal
]
Basic
[ Enabled ]
[ /
][ /
][ /
][ /
] [ Normal
]
Basic
[ Disabled ]
[ /
][ /
][ /
][ /
] [ Normal
]
Basic
[ Disabled ]
[ /
][ /
][ /
][ /
] [ Normal
]
Basic
[ Disabled ]
[ /
][ /
][ /
][ /
] [ Normal
]
Basic
[ Disabled ]
[ /
][ /
][ /
][ /
] [ Normal
]
Basic
[ Disabled ]
Trunk
----1
2
3
4
5
6
Trunk Name
-----------------[ S4:T5 to S1 ]
[ Trunk #2 ]
[ Trunk #3 ]
[ Trunk #4 ]
[ Trunk #5 ]
[ Trunk #6 ]
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
Figure 1-45.
309985-B Rev 00
MultiLink Trunk Configuration Screen for Switch S4
1-71