Download NEC Express5800/320Ma Technical Reference Guide

ftSMC Component Actions
Table 3-2. ftSMC System Inventory Component Actions (Continued)
Action
Description
Set Rdr Lun Load
Balancing
Sets read load balancing for RDR virtual disks to on or off.
Set Resync Priority
Sets the resynchronization priority for individual RDR disks.
Start Slot
Identification
Causes the LEDs on the disk in the slot to flash so that you can physically
locate a disk that is experiencing a problem.
Stop Slot
Identification
Stops the LEDs on the disk from flashing. See Start Slot Identification.
Stop Verify
Stops the RDR disk verification operation.
Synchronize SEL
date and time with
System
Assigns the current system date and time to the SELTime property.
Update BMC
Firmware
Updates the BMC firmware. See the Express5800/320Ma: Software
Installation and Configuration Guide for details.
Update Firmware
Updates a device’s firmware (for example, the BIOS in the CPU element, or
the firmware for storage enclosures or VTMs). Prompts you to enter the path
of the file containing the updated firmware and copies the file to the
appropriate location. This action may be unavailable if the device is online.
See the Express5800/320Ma: Software Installation and Configuration Guide
for details.
Update ID Prom
Updates the IDPROM information. See IDPROM in Table 3-1 for IDPROM
information. When you finish, click Apply. A dialog box displays the status of
the operation.
Update Network
Settings
Updates the VTM network settings.
Verify RDR Virtual
Disk
Verifies the integrity of RDR disk mirrors.
ftSMC Component Properties and Actions
3-27