Download NEC Express5800/320Fd User Setup Information

Windows Setup 4-3
SETUP FLOW
0
This flow chart illustrates the flow of the setup
procedures for the NEC Express5800/320Fd-MR.
Step 1 Start the OS reinstallation setup procedure
Step 2 Prepare the OS reinstallation setup
Step 3 Disable OS Boot Monitoring Function
Windows Server 2003 x64 Editions (Manual Setup)
Step 4B
Windows Server 2003 (Express Setup)
Step 4A
Express Setup
Set [NEC EXPRESSBUILDER] DVD
Manual Setup
Create [OEM-Disk]
Specify the size of the partition for OS installation
Set OS (Windows) CD-ROM
Prepare for Windows Server 2003 R2 32-bit Enterprise
Editions installation and ft Server Control Software
installation
Install driver in [OEM-Disk]
Start the OS installation
Set Windows Server 2003 R2 32-bit Enterprise Edition
CD-ROM
Apply [Update the system]
Install ft Server Control Softwareand
NEC ESMPRO/ServerAgent
Step 5
Install Windows Server 2003
Service Pack
Step 6
Set Dual LAN Configuration
Step 7
Set Dual Disk Configuration
Step 8
Update Software
Step 9
Connect and Configure Options
Step 10
Create Volume
Step 11
Set Network for NEC ESMPRO
Step 12
Enable OS Boot Monitoring
Step 13
Make Settings for Failure
Step 14
: Entered or selected by the user
: Proceeds automatically
Automatic installation of following software:
Windows Server 2003 R2 32-bit Enterprise Edition
ft Server Control Software, ESMPRO
Server/Agent
Back up System Information
Completion