Download MPI Technologies LAN Brick Eth 10 User's Manual

The perfect solution for migration of coax or twinax
AFP/IPDS printers into an Ethernet network
Print Server
LAN Brick™
! Preserves Existing Investments
The MPI Tech LAN Brick Eth 10 is the only and obvious choice when existing
coax- and twinax attached AFP/IPDS printers should be moved into an
! Supports Coax or Twinax Printers
! True Migration
Ethernet LAN environment.
The solution preserves existing investments into AFP/IPDS printing
! No Changes Nescessary
equipment as well as it removes the need for double cabling systems.
! Supports TCP/IP
The MPI Tech LAN Brick is designed for Ethernet networks and supports
10Base-2 (coax BNC connector) and 10Base-T (RJ45 connector) networks.
The LAN Brick operates with IBM PSF/MVS, IBM PSF/400, IBM PSF/2 and PSF
for AIX Version 2.1 to provide LAN connectivity for IBM compatible midrange
IPDS printers.
Printing and Conversion Solutions
Attachment
Indirect LAN IPDS Printing Requirements
LAN BrickTM Eth 10
S/370 - S/390
Ethernet 10Base-2 (IEEE 802.3) at 10 Mbps
PSF for MVS rel. 2.1 or higher incl. PTFs
Ethernet 10Base -T (IEEE 802.3) at 10 Mbps
Approvals
UL, cUL, CE
Safety
AS/400
AFP/IPDS System Support
OS/400 V3R1 or higher incl. PTFs
EN 60950 with amendments
UL 1950, 3rd edition
IBM S/370-S/390 (MVS)
IBM AS/400
Supported IPDS printers
IBM RS/6000
IBM PS/2
Low Voltage Directive, 73/23/EEC
IBM 3112/3116
IBM 3812/3816
EMC
EMC Directive: 89/336/EEC,
IBM 3912/3916
FCC Part 15 Subpart B Class B,
IBM 3930
AS/NZS 3548 Class B,
S/370-390
IBM 4028 AS1/NS1
EN 55022: 1998 Class B,
PSF MVS ver. 2.2 or higher incl. PTFs
IBM 4230
EN61000-3-2,
TCP/IP for MVS ver. 3.1
IBM 4312/4317/4324
EN61000-3-3,
IBM 6408/6412
EN 55024: 1998
Direct LAN IPDS Printing Requirements
AS/400
MPI Tech coax/twinax IPDS solutions
PSF/400
Other IPDS printers compatible with the
OS/400 V3R1 or higher incl. PTFs
above
Warranty
3 years manufacturing fault warranty
OS/400 V3R6 (RISC) or higher incl. PTFs
Features
RS/6000
PSF/6000 ver. 1.2.0 or higher
Connects IPDS compatible coax/twinax
Size
printers to the LAN
Height: 235 mm
PS/2
Uses routable protocol (TCP/IP)
Width: 165 mm
OS/2+PSF/2 ver. 1.10 incl. CSDs
Both coax and twinax printer connection
Depth: 30 mm
Set-up
via BOOTP
Part Number
968501-x30
Product Name
LAN Brick™ Eth 10
Description
External Ethernet to coax/twinax PrintServer
bridge
Part Number Extension
Additional Feature
Description
-1xx
International version
EU/International Power supply
-2xx
UK version
UK Power supply
-3xx
US version
US Power supply
-5xx
AUS version
Australian Power supply
MPI Tech Offices
France
40, rue du Général Malleret Joinville
BP 88 - 94402 Vitry sur Seine Cedex
Phone:
+33 (0)1 4573 0940
Fax:
+33 (0)1 4680 7071
E-mail:
[email protected]
United Kingdom
Gibbs House, Kennel Ride, Ascot
Berkshire SL5 7 NT
Phone:
+44 (0)1 344 89 10 08
Fax:
+44 (0)1 344 89 09 08
E-mail:
[email protected]
North America - West Coast
4952 Warner Avenue, Suite 301
Huntington Beach, CA 92649-5506
Phone:
+1 (714) 840 8077
Fax:
+1 (714) 840 2176
E-mail:
[email protected]
Denmark
Vadstrupvej 35
DK-2880 Bagsvaerd
Phone:
+45 4436 6000
Fax:
+45 4436 6111
E-mail:
[email protected]
Germany
Poccistrasse 7
D-80336 Muenchen
Phone:
+49 (0)89 35 4762 20
Fax:
+49 (0)89 35 4762 11
E-mail:
[email protected]
North America - East Coast
901 North Stuart Street, Suite 1105
Arlington, VA 22203
Phone:
+1 (703) 243-3322
Fax:
+1 (703) 243-3305
E-mail:
[email protected]
D16110-002 Company and product names mentioned in this text are trademarks or registered trademarks of their respective owners. MPI Tech A/S cannot be held responsible
for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification.