Transcript
Specifications ® DESCRIPTION • Metal construction with chrome plated finish • Pressure balancing cycle valve design with an adjustable temperature limit stop • 1/2" IPS connections • Includes showerhead, arm, flange, and diverter tub spout OPERATION • Lever style handles (Chrome & Porcelain) • LifeShine® polished brass accent or chrome accent • Handle operates counterclockwise through a 270˚ arc with off at 6 o'clock and maximum hot at the 9 o'clock position. Shut off in clockwise direction • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2˚ FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 1222 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified to CSA B-125, ASME A112.18.1M, ANSI A117.1 and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations 2" (51 mm) CC 1-7/8" (48 mm) IPS Max. Wall ADA Single-Handle Tub/Shower Model: L82385 Face of Stud Finished Wall Line 1/2" (13 mm) Min. CC 5/8" (16 mm) Min. IPS 2-1/2" Max. (63 mm) Plaster Ground 6'-6" (1981 mm) 3/6" (typ) (5mm) Nomimal 1-1/2" (38mm) 1-3/8" (35 mm) 3-1/2" (90 mm) CL 1-3/8" (35 mm) 3-1/2" (90 mm) Max. 2-1/4" (57mm) Min. CL Shower 45" (1143 mm)/ 48" (1219 mm) Plastic Tub/Shower Surround Tub/Shower & Tub Only 32" (813 mm) 7" (178 mm) 2-1/4" (57 mm) Floor Line Floor Line THICK WALL APPLICATION THIN WALL APPLICATION ESC. DIAM. CRITICAL DIMENSIONS (DO NOT SCALE) MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 ADA symbol applies to shower valve control only. Rev. 7/04