Transcript
Specifications ® DESCRIPTION • Metal construction with a chrome plated, decorative glacier, LifeShine® polished brass, Platinum, Black Opal™, Classic Gold, or Satine™ finish • Includes adjustable showerhead, arm, and flange OPERATION • Lever style handle with temperature indicator on the escutcheon, pull-on/push-off operation • Temperature operates through an 180° arc of handle travel (full cold to full hot) • Adjustable temperature limit stop to control maximum hot water temperature • Pressure balancing mechanism maintains selected discharge temperature to ± 2° FLOW • Showerhead is limited to 2.5 gpm (9.5 L/min) CARTRIDGE • 1225 cartridge design • Nonmetallic/nonferrous and stainless steel materials • Accommodates back to back installations STANDARDS • Third party certified by CSA to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein and complies with the applicable requirements of ANSI A117.1 WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations ADA MONTICELLO® INSPIRATIONS™ MOENTROL® Single-Handle Pressure Balancing Tub/Shower (Trim Only) Models: T3125, T3125CP, T3125P, T3125W, (Bulk packed 12 per carton) RT3125PM/AT2199PM, RT3125BP/AT2199BP, RT3125CG/AT2199CG, RT3125ST/AT2199ST (Packed 1 per carton) T3124, T3124CP, T3124P, T3124W, 82221 (Packed 1 per carton) NOTE: See reverse side for illustrated parts and optional handle inserts FINISHED WALL LINE H/A/F 1-15/16"(49mm) MIN. 2-9/16" (65mm) MAX. 7" (178mm) ESCUTCHEON DIAMETER ESCUTCHEON 1" (25mm) 1-1/4" (32mm) 5-1/2" (140mm) WALL OPENING HOT INLET 7-1/2" (191mm) MIN. CL 6'-6" (1981mm) COLD INLET LEVER HANDLE (Handle inserts not furnished) 45" (1143mm)/ 48" (1219mm)- SHOWER 32" (813MM) - TUB OR TUB SHOWER TUB RIM FLOOR CRITICAL DIMENSIONS (DO NOT SCALE) MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 ADA symbol applies to shower valve control only. Rev. 4/01