Download Locke FP User's Manual
Transcript
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) 493-1300 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 50017492 Hydraulic Cylinder (Rear) 70015 Gearbox Assembly Deck Drive 70833 Divider Gearbox 76644 Driveshaft, Wing 76678 Driveshaft, Center 93063 C.v. Driveshaft (Input) 99564 Wing Lift Hydraulic Cylinder Base Frame & Shielding Blade Spindle (MP) Blade Spinde (FP) Blades, Belts & Pulleys (MP) Blades, Belts & Pulleys (FP) Caster Arm & Wheel Assemblies Hydraulic Assembly Mainframe & Related Parts Rear Arm Assembly Roller Assembly Shielding, Center Transfer Gearbox Transport Latching Parts Transport Wheel, Tire & Spindle 7-1 3-1 3-2 4-2 4-1 4-3 7-2 1-1 2-3 2-4 2-1 2-2 5-1 6-1 1-2 1-3 5-3 3-3 1-4 5-2 20 22 22 22 5 5 17 22 22 4 16 21 7 21 19 18 22 9 22 15 12 10 5 13 11 14 6 8 15 MP3132 3 FP3132 2 23 13 14 13 14 24 1 Base Frame & Shielding REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. QTY 50026138 500033 50012616 99498 50012615 98082 89477 15165 50021133 83105 82619 20414 15916 1 1 2 1 3 2 1 3 1 1 1 4 4 DESCRIPTION REF. NO. Deck w/Decals Decal, Locke (Large) Decal, Danger R.H. Shield w/Decals Decal, Warning Decal. Belt Installation Decal, Warranty HHCS 5/8” x 1-3/4” Gearbox Stand w/Decal Decal, Warning Decal, Danger Locknut, Flange 5/8” Flatwasher 1/2” 14 15 16 17 18 19 20 21 22 23 24 1-1 PART NO. QTY 1056 19518 98253 98174 44215 44311 99499 50014067 98284 50100010 50100006 500034 4 4 1 1 4 4 1 2 7 1 1 2 DESCRIPTION HHCS 1/2” x 1-1/4” Gr.5 Locknut, Flange 1/2” Shield Mount Bracket Shield w/Decal HHCS M8 x 1.25 x 15mm Lockwasher M8 L.H. Shield w/Decals Cap Swell Latch Decal, Model (MP Series) Decal, Model (FP Series) Decal, Locke (Small) 34 37 42 49 45 46 40 37 35 33 32 7 30 14 6 50 31 47 28 65 16 17 48 13 39 43 36 49 41 36 42 42 44 34 33 4 25 3 9 12 64 58, 59, 60 57 63 Mainframe and Related Parts REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 PART NO. 97143 20923 19486 15509 50024783 24D25128 50024784 50024785 44204 20567 15474 50018633 50031214 53315 50020352 83343 500033 82683 87317 87340 60873 20766 146 44704 44008 50020226 50017147 50017140 50017145 20237 50021164 20376 15474 50021120 QTY 1 2 4 4 1 1 1 1 2 2 2 1 2 2 4 2 2 1 1 1 1 2 2 2 2 2 2 1 1 2 2 2 4 4 2 23 24 19 21 1 11 26 15 66 10 3 25 48 26 36 51 17 16 8 31 30 DESCRIPTION Hitch Weldment HHCS 5/8” x 6” Gr.5 Lockwasher 5/8” Hex Nut 5/8” Tongue w/Decals Jackstand Assembly Wing Assembly, L.H. Wing Assembly, R.H. HHCS M12 x 1.75 x 25 Gr.8 Flatwasher 1-1/4” Cotter Pin 1/4” x 1-3/4” Frame Weldment Reflector, Red Reflector, Amber Spring Bushing 1-1/2” x 1-1/4” x 3/4” Decal, Warning Decal, Locke Decal, Warning Decal, Drawbar Decal, Important Decal, Caution HHCS 3/4” x 7-1/2” Lockwasher 3/4” Hex Nut 3/4” HHCS 5/8” x 2-1/4” Pivot Pin Lockwasher M12 Swivel Weldment, LH Swivel Weldment, RH\ Collar Roll Pin 3/8” x 2-1/2” Pin Flatwasher 1” SAE Cotter Pin 1/4” x 1-3/4” Deck Roll Bracket 1-2 REF. NO. 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 3 65 4 14 13 34 33 47 47 36 40 42 41 40 PART NO. 50020221 44040 20496 9161600 44513 98725 15829 15806 8151600 15519 44357 50021149 50020353 50020350 91091 50024992 50024991 98298 8150600 16040600 98284 50024988 20084 8151200 15812 44721 99459 50024989 50026940 50029494 37 32 34 39 35 49 62 53, 54, 55 60, 61 59, 60, 61 43 42 43 44 39 4 29 15 43 56 52 48 27 3 5 22 4 38 24 23 2 48 39 43 44 43 42 41 40 11 20 15 47 43 10 18 41 42 49 43 33 42 44 38 QTY DESCRIPTION 4 4 4 4 4 4 8 8 4 2 2 4 4 4 1 1 1 1 4 4 4 1 1 2 4 6 4 1 1 1 2 1 Bushing Flatwasher, Belleville HHCS 1/2” x 5-1/2” Gr.5 Locknut 1/2” HHCS 1/2” x 2” Gr.5 Limit Spacer Flatwasher 1/2” Lockwasher 1/2” Hex Nut 1/2” Jam Nut 1/2” Setscrew 1/2” x 1-3/4” Spring Bushing 1.0” ID x 1.5” Spring Bushing 1.25” ID x 1.5” Spring Bushing .75” ID x 1.75” Safety Tow Chain Toolbox Assembly (52-64) Box Weldment Top Weldment Pan Head Screw #10 x 1/2” Hex Nut #10 Lockwasher #10 Swell Latch Bracket Weld., Upper Mtg. HHCS 3/8” x 3/4” Hex Nut 3/8” Lockwasher 3/8” HHCS 3/8” x 3/4” Strap Bracket, Lower Mtg. Hair Pin Decal, Float Information Decal, Lube 6 10 17 18 17 16 15 11 8 12 24 24 23 16 34 9 7 1 30 34 5 4 3 2 31 11 8 32 25 26 25 26 22 29 28 35 16 17 10 18 17 21 20 19 14 33 15 16 17 18 27 10 17 16 34 13 18 17 21 20 19 Rear Arm Assembly REF. NO. PART NO. QTY 1 50023270 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 50021320 15554 20864 15093 15804 15508 20496 50020217 9161600 44040 50021135 50020221 20110 94281 15916 15806 1 2 2 4 4 4 1 1 4 4 1 2 2 2 6 5 DESCRIPTION REF. NO. Rear Arm Assembly (Includes swivel assembly & related fasteners, bushings) Spindle & Hub Assy. Locknut 1/2” HHCS 1/2” x 3” Gr.5 HHCS 1/2” x 1-1/2” Gr.5 Lockwasher 1/2” Hex Nut 1/2” HHCS 1/2” x 5-1/2” Bushing Locknut 1/2” Flatwasher, Belleville Cradle Weldment Bushing HHCS 1/2” x 2” Gr.8 Limit Spacer Flatwasher 1/2” Lockwasher 1/2” 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 1-3 PART NO. QTY 8151600 44153 98725 15906 94360 94359 1160806 15905 15531 20034 15812 8151200 50028252 50026940 50020219 20580 50020350 50021050 2 2 2 2 1 1 2 2 2 2 2 2 1 1 1 1 7 2 DESCRIPTION Hex Nut 1/2” HHCS 1/2” x 2” Gr.8 Limit Spacer Flatwasher 1/2” SMV Sign Bracket SMV Placard HHCS 1/4” x 3/4” Lockwasher 1/4” Hex Nut 1/4” HHCS 3/8” x 1” Lockwasher 3/8” Hex Nut 3/8” Swivel Assembly Decal, Float Information Bushing HHCS 1/2” x 6-1/2” Gr.5 Spring Bushing (1.75” Long) Spring Bushing (1.25” Long) 5 8 18 10 9 13 11 10 9 19 3 1 12 13 6 9 20 7 2 14 6 1 10 16 15 17 Transport Latching Parts 7 4 3 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1-4 PART NO. QTY 94375 50018541 50018540 15675 94331 50017303 84672 1273 20881 8151200 15812 50018562 50024037 94862 5121222 50018623 44174 10151200 15915 1161212 94374 2 1 1 2 1 1 3 3 1 7 5 1 1 2 2 2 2 2 1 2 2 DESCRIPTION Spring Wing Lock Weldment, LH Wing Lock Weldment, RH Cotter Pin 5/32 x 1-1/2” Pin Chain w/ Sleeve Wing Lock Pin Hair Pin HHCS 3/8” x 1-1/2” Hex Nut 3/8” Lockwasher 3/8” Handle Weldment Hook Spring Snap Carriage Bolt 3/8” x 2-1/4” Gr.5 Pin HHCS 3/8” x 1-3/4” Jam Nut 3/8” Flatwasher 3/8” HHCS 3/8” x 1-1/4” Pin 8 2 5 6 14 3 10 11 4 56 12 15 13 37 Upper Belt Lower Belt 54 12 19 51 20 38 22 12 9 40 7 17 12 46 44 45 45 44 11 42 9 47 42 12 50 48 5 47 36 7 49 48 5 12 43 56 4 39 52 58 46 40 57 43 1 41 14 15 59 21 16 39 35 23 18 NOTE: 34 Items 31, 32 & 34 are Available in kit form: 31 32 33 Kit 88161 Contains: (20) 527747 counterClockwise rotation blades. 30 31 33 32 34 29 27 28 24 Kit 88162 Contains: (40) 527745 blade bolts (40) 527495 blade bolts 55 25 26 Blades, Belts & Pulleys MP REF. NO. 1 2 3 4 5 6 7 8 9 10 PART NO. 20034 15812 96800 1161212 15915 95807 96997 20314 6050133 96801 QTY 4 9 1 1 1 1 2 1 4 2 DESCRIPTION HHCS 3/8” x 1” Lockwasher 3/8” Adjustment Rod Weldment HHCS 3/8” x 1-1/4” Flatwasher 3/8” Bushing Threaded Rod Carriage Bolt 5/8” x 3” Flatwasher 5/8” Special Spacer 2-1 53 REF. PART NO. QTY 11 12 13 14 15 16 88663 20414 96813 96649 50014112 98773 2 6 1 2 2 3 17 18 19 20 21 22 23 24 25 26 27 28 29 96165 96161 9162000 20748 88753 95752 50017379 50034015 44040 44506 95782 19100 82323 50029157 50017381 527747 527745 1 1 1 1 1 1 3 3 12 3 12 12 3 3 3 12 12 12 12 9 9 1 1 2 2 1 2 2 2 2 4 11 4 1 1 1 1 1 1 A/R 2 1 1 1 1 NO. 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 527495 5161614 15806 96815 96814 15666 97111 44498 15916 96816 95818 95827 15519 8151600 8151200 96996 95803 94906 70287 70286 70288 97658 20748 97920 97921 44226 97043 DESCRIPTION Idler, Flat Locknut, Flanged 5/8” Pivot Bolt Idler Arm Weldment Pivot Sleeve Spindle & Pulley Assembly (Items 16-22) Sheave, Lower Carrier, Blade Locknut, 5/8” Flatwasher 5/8” Woodruff Key #606 Sheave, Upper Blade Bushing Washer, Shaft Washer, Heavy Duty HHCS 1/2”-20 UNF x 1-3/4” Washer, Belleville HHCS 3/8”-16 UNF x 3/4” Blade, Clockwise 17” Blade, Mulching, 17” Disc Weldment Blade, Counterclockwise HHCS Flange Flatwasher Blade Nut HHCS 1/2” x 1-1/2” Lockwasher 1/2” Lower Belt 101” Upper Belt 115” Carriage Bolt 5/8” x 2-1/2” V-Idler Pulley, 5.5” Dia. Carriage Bolt 5/8” x 4-1/2” Flatwasher 1/2” Pivot Mount Weldment Pivot Weldment Spring Jam Hex Nut 1/2” Hex Nut 1/2” Hex Nut 3/8” Angle Pivot Weldment Bushing Sheave Nut M30 x 2 Lockwasher M30 Key, Square Spacer Flatwasher 5/8” Spacer (long) Spacer (short) Carriage Bolt 5/8” x 2” “V”-Idler Pulley, 4.7” Dia. 7 4 5 6 11 3 8 35 2 21 10 24 33 30 9 13 14 16 37 26 28 32 31 7 Blades, Belts & Pulleys FP 1 22 28 REF. 12 NO. 38 36 29 27 1 5 2 25 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 4 36 21 17 34 20 18 19 REF. NO. PART NO. QTY 24 DESCRIPTION 25 Spacer Flatwasher 5/8” Spindle & Pulley Assembly See Page 10 Pivot Weldment Spring V-Idler Pulley, 5.5” Dia 27 28 29 30 31 32 33 26 34 35 36 97658 20748 98773 A/R 2 3 36 37 38 95818 95827 97111 1 1 1 2-2 PART NO. QTY DESCRIPTION 15519 15812 96800 1161212 15915 95807 20314 96801 88663 96813 96649 50017112 9162000 20748 88753 95752 50034015 44040 44506 82323 5161614 15806 2 1 1 1 1 1 1 2 2 1 2 2 1 1 1 1 3 1 1 3 4 4 Jam Hex Nut 1/2” Lockwasher 3/8” Adjustment Rod Weldment HHCS 3/8” x 1-1/4” Flatwasher3/8” Bushing Carriage Bolt 5/8” x 3” Spacer Idler, Flat Pivot Bolt Idler Arm Weldment Pivot Sleeve Locknut, 5/8” Flatwasher 5/8” Woodruff Key #606 Sheave, Upper Washer, Shaft Washer, Heavy Duty HHCS 1/2”-20 UNF x 1-3/4” Blade, Clockwise 17” Carriage Bolt, 1/2” x 1-1/2” Lockwasher 1/2” 96814 44498 15916 96816 8151600 8151200 91906 70287 70286 70288 1 1 2 2 1 1 1 1 1 1 Upper Belt 115” Carriage Bolt 5/8” x 4-1/2” Flatwasher 1/2” Pivot Mount Weldment Hex Nut 1/2” Hex Nut 3/8” Sheave Nut M30 x 2 Lockwasher M30 Key, Square 1 2 Blade Spindle MP 3 REF. NO. PART NO. QTY DESCRIPTION 4 5 6 7 8 9 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 10 98773 1 9162000 20748 95752 96165 95764 95757 88753 94953 96162 92924 96161 44040 44506 50026133 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 Replacement Spindle Assy. (Items 1-13) Lock Nut 5/8” Flatwasher 5/8” Upper Sheave Lower Sheave Bearing, Inner Shaft Shaft, Inner Woodruff Key 606 Bearing, Outer Shaft Shaft, Outer Hub, Machined Blade Carrier Washer, Heavy Duty HHCS 1/2”-20 UNF x 1-3/4” Bearing Kit 3 2 3 4 4 8 5 11 12 13 REF. NO. 1 2 3 4 2-3 PART NO. QTY 50026084 50026086 44174 15915 1 1 2 2 DESCRIPTION Wrench Weldment Sheave Wrench Weld. HHCS 3/8” x 1-3/4” Gr.5 Flatwasher 3/8” 1 2 3 4 REF. NO. 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 6 7 8 9 5 4 10 11 12 13 Blade Reinforcement Washer Rotated 180° For Clarity 2 14 2-4 PART NO. QTY 9162000 20748 95752 97685 95764 50100001 449 20593 95757 50100049 50034015 82323 50100045 44506 1 2 1 2 2 1 1 1 1 1 1 1 1 1 DESCRIPTION Lock Nut 5/8” Flatwasher 5/8” Upper Sheave Snap Ring Bearing, Inner Shaft Machined Housing Weldment Grease Fitting Woodruff Key Shaft, Inner Blade Bushing Washer, Heavy Duty Blade Washer, Heavy Duty HHCS 1/2”-20 UNF x 1-3/4” 9 10 13 11 1 12 14 7 1 15 27 16 8 4 2 3 1 26 25 24 6 5 17 12 18 19 20 Gearbox Assembly Deck Drive REF. NO. 21 22 23 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 *27 MP and FP REF. NO. 1 2 3 4 5 6 7 8 9 10 PART NO. 70329 70330 70331 70332 70107 70133 70279 70226 70281 70110 70094 70326 70092 QTY A/R A/R A/R A/R 1 1 1 1 1 2 1 4 1 DESCRIPTION Shim .3mm Shim .4mm Shim .5mm Shim 1.3mm Bearing Retaining Ring Cap Key M10 x 8 x 30 Shaft Outside Retaining Ring Gear 26 Teeth HHCS M8 x 16 Top Plate PART NO. 70282 70082 70393 N/A 70129 70283 70284 70081 70285 70080 70079 70286 70287 70288 70290 70291 70152 QTY 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION Pinion 12 Teeth Bearing Vent Plug Serial Number Plate Bearing Housing Spacer Ring Gasket Bushing Seal Shoulder Ring Spring Washer Hex Nut Key 6 x 6 x 30 mm Seal Retaining Ring Gasket * Silicone Sealer may be used in place of gasket. 3-1 14 4 15 12 3 5 2 1 16 7 2 13 1 19 12 17 18 14 17 7 11 2 13 10 10 9 8 6 9 4 Divider Gearbox REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. 70229 F7502875 70108 70921 70110 70292 70797 70922 70923 70449 70924 70698 70249 70113 80538 70132 70261 F7502730 F7502867 QTY 3 5 2 2 2 1 3 1 2 2 1 2 3 12 1 2 3 1 1 3-2 DESCRIPTION Bearing Shim Oil Seal 35 x 72 x 10 Shaft Snap Ring Plug Taper Bearing Set Casing Screw, Hex Socket M12 x 40 Blank Washer Shaft Oil Seal Gear 18 Tooth HHCS M12 x 25 Plug, Breather Extension Housing Gasket Cover Shim 13 2 7 17 16 14 1 2 5 3 9 10 6 5 5 7 3 1 8 2 4 Shielding, Center Transfer Gearbox MP and FP REF. NO. 1 2 3 4 5 6 7 8 9 10 PART NO. QTY 44394 70925 50024786 50018614 50012615 82617 82618 44200 20054 15806 4 1 1 1 2 1 1 4 2 2 3-3 DESCRIPTION HHCS M12 x 1.75 x 30 Plug Shield w/ Decals Shield Mount Weldment Decal, Warning Decal, Warning Decal, Warning Lockwasher, M12 HHCS 1/2” x 1” Lockwasher 1/2” 25 26 1 29 2 3 17 12 13 7 4 28 5 27 24 6 8 9 15 13 11 10 2 22 18 23 21 30 19 20 14 16 76678 Driveshaft, Center 540 RPM - 1-3/8”-6 Spline Manufactured by Comer REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 76801 64610 63956 66112 66869 76072 76847 76848 66110 66109 76616 87995 87992 87993 64814 QTY 1 2 2 1 1 1 1 1 1 1 1 1 6 1 2 DESCRIPTION REF. NO. Complete Collar Yoke Cross Journal Set Grease Nipple Outer Yoke Roll Pin For Outer Tube Bushing with Grease Nipple Complete Outer Tube Inner Tube Roll Pin for Inner Tube Inner Yoke Complete Shear Bolt Collar for Outer Tube Bolt Collar for Inner Tube Safety Chain 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 4-1 PART NO. 76849 76282 76618 76202 76062 76619 44525 63946 76850 76851 76852 76786 78608 50017480 44342 QTY 1 3 1 23 1 1 6 1 1 1 1 1 1 1 1 DESCRIPTION Complete Shield Ball 1/2” Yoke Ball Push Pin Set 1-3/8” Hub HHCS M10 x 1.5 x 55 Grease Fitting Male Tube Yoke w/ Roll Pin Half Female Shaft w/ Shield Half Male Shaft w/ Shield Decal, Danger, Outer Tube Decal, Danger, Outer Shield Tube Ball Collar Kit 1-3/8” Hex Nut M10 15 16 1 19 2 6 3 10 11 18 4 5 2 17 13 7 11 8 12 14 76644 Driveshaft, Wing Manufactured by Comer REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. QTY 76711 64694 63956 78571 78577 76712 76713 78578 78570 76192 87992 76191 64814 76714 76715 76716 78786 78608 50017480 2 2 2 1 1 2 1 1 1 1 6 1 2 1 1 1 1 1 1 4-2 DESCRIPTION Complete Collar Yoke Cross Journal Set Grease Nipple Outer Yoke Roll Pin for Outer Tube Complete Outer Tube Inner Tube Roll Pin for Outertube Inner Yoke Guard Retaining Collar, Outer Bolt Guard Retaining Collar, Inner Safety Chain Complete Shield Half Female Shaft w/ Shield Half Male Shaft w/ Shield Danger Decal, Outer Tube Danger Decal, Outer Shield Ball Collar Kit 1-3/8” 3 1 1 2 4 5 6 6 7 8 11 7 9 10 12 15 13 18 17 16 7 14 22 25 19 20 21 22 23 24 3 93063 C.V. Driveshaft (Input) 540 RPM Manufactured by EG REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. QTY 76521 76522 76514 50017505 50017480 76420 63956 76421 76471 66866 76474 78786 76056 1 1 1 1 1 2 3 1 1 1 1 1 1 DESCRIPTION REF. NO. Tractor Half Assy. Implement Half Assy. Complete Shield Assy. Yoke Assy. w/ Collar Collar Kit Cross Bearing Kit Grease Fitting Double Yoke Assy. Outer Yoke Roll Pin Outer Tube Assy. Decal, Danger Outer Yoke, & Pin Assy. 14 15 16 17 18 19 20 21 22 23 24 25 4-3 PART NO. 76064 64663 66870 66869 76475 76362 76423 76057 87992 78608 64814 76059 QTY 1 1 1 1 1 6 1 1 6 1 3 1 DESCRIPTION Taper Pin Kit Cross Bearing Kit Inner Yoke Roll Pin Inner Tube Screw Bearing Ring Outer Bearing Shield Bolt Danger Decal Safety Chain Inner Bearing 8 9 10 8 9 10 11 5 1 14 6 13 1 7 2 7 16 6 5 6 5 15 5 2 5 4 7 1 6 6 12 1 7 7 7 3 6 12 5 6 6 7 12 6 18 7 7 5 19 17 6 1 18 12 12 1 11 12 7 12 12 1 7 6 1 7 6 5 5 Caster Arm & Wheel Assemblies MP and FP REF. NO. PART NO. QTY 1 50021071 8 2 98293 2 3 50023311 1 4 50023312 1 5 6 7 8 9 10 11 44107 19486 15563 50017304 99292 99291 99290 24 24 24 12 24 24 24 DESCRIPTION REF. NO. Arm Weldment (Round Hole, Curved) Arm Weldment (Hex Hole, Straight) Arm Weldment, RH (Hex Hole, Curved) Arm Weldment, LH (Hex Hole, Curved) HHCS 5/8” x 3-1/2” Lockwasher 5/8” Hex Nut 5/8” Lynch Pin Spacer 1/4”, Round/ Hex Hole Spacer 1/2”, Round/ Hex Hole Spacer 1”, Round/ Hex Hole 12 50021066 13 50020433 50024400 16 8 4 1 1 14 50020434 50024401 1 1 15 16 17 20776 15554 97948 1 1 1 18 19 98342 50021519 2 1 5-1 PART NO. QTY DESCRIPTION Bushing Bronze Fork & Tire Assy. (Round Shaft) Fork & Tire Assy. (Hex Shaft) Caster Weldment (Round Shaft) Extended Caster Weldment (Round Shaft) Caster Weldment (Hex Shaft) Extended Caster Weldment (Hex Shaft) HHCS 1/2” x 6” Locknut 1/2” Tire Assembly (410/350 x 4 Pnuematic Tire) Bearing Spacer, Wheel 5 17 18 6 7 2 8 9 3 15 4 16 14 10 11 12 13 Transport Wheel, Tire & Spindle REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. QTY 50024407 50024406 94378 50001181 50021320 50021317 15675 50021318 50000115 50076 20571 20429 3750021 50021319 50000113 14-6-197 20775 15515 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 6 6 1 DESCRIPTION Tire & Wheel Assy. Tire Wheel Valve Stem Spindle & Hub Assy. Spindle Cotter Pin, 5/32” x 1-1/2” Rear Seal Bearing Cone (Inner) Bearing Cone (Outer) Flatwasher 7/8” Castle Nut 7/8” Hub Cap Hub w/ Cups & Bolts Inner Bearing Cup Outer Bearing Cup Lug Bolt 1/2” x 1-7/8” Lug Nut 1/2” x 20 UNF 5-2 4 14 9 8 2 11 20 10 9 8 12 1 15 Roller Assembly MP and FP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 6 3 9 8 7 13 5 13 REF. NO. 7 PART NO. QTY 95415 50021173 79057 20580 50021168 50021169 20034 15812 15830 50021171 1161212 8151200 9161600 50021170 50020073 44109 15830 15812 8151200 50021172 1 1 1 1 1 1 4 8 8 2 4 4 2 1 2 8 8 8 8 1 DESCRIPTION Roller Assembly (Under) Roller Shaft (Under) Roller Assembly (Front) HHCS 1/2” x 6-1/2” Right Hand Roller Mount Left Hand Roller Mount HHCS 3/8” x 1” Lockwasher 3/8 Flatwasher 3/8” Roller Bracket HHCS 3/8” x 1-1/4” Hex Nut 3/8” Locknut 1/2” Sleeve Baffle Carriage Bolt 3/8” x 1” Flatwasher 3/8” Lockwasher 3/8” Hex Nut 3/8” Sleeve 9 8 12 19 18 17 15 5-3 10 13 16 10 2 11 3 12 13 12 13 9 7 4 6 3 31 5 30 5 29 5 17 18 1 5 22 33 32 17 15 14 16 19 17 15 23 20 28 24 27 25 26 21 5 30 29 8 24 25 26 31 Hydraulic Assembly MP and FP REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. QTY 50017830 25H42303 53340 50017834 14-40-98 53341 62006 97666 50017007 15918 1 1 6 1 7 1 3 1 1 2 2 2 2 1 2 1 15905 15531 25D25683 25H43870 61469 DESCRIPTION REF. NO. Valve Body O-Ring Plug Straight Thread Adaptor Check Valve Elbow 90° Straight Thread Adaptor Plug Assembly Bracket, Valve Shield Weldment Flatwasher 1/4” HHCS 1/4” x 2-3/4” Lockwasher 1/4” Hex Nut 1/4” Adaptor Coupler Hydraulic Hose 72” 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 6-1 PART NO. QTY 53329 25H41710 25H46123 94878 62430 25H41146 24-6-434 20947 19486 15509 15925 12031 95425 63633 99564 50017492 50015044 3 1 1 1 1 1 1 2 2 2 1 1 2 4 2 1 1 DESCRIPTION Hydraulic Hose 72” Hydraulic Hose 21” Hydraulic Hose 37” Safety Tag Hydraulic Hose 48” Hydraulic Hose 31” Straight Adaptor HHCS 5/8” x 2” Lockwasher 5/8” Hex Nut 5/8” Flatwasher 5/8” Hose Holder Clevis Pin Hair Pin Hydraulic Cylinder, Wing Hydraulic Cylinder, Rear Restrictor Union 9/16”-18 JIC M/F 14 8 1 12 13 7 3 Cylinder Assembly Part Number Stamped Here 15 6 5 2 12 4 9 16 10 50017492 Hydraulic Cylinder (Rear) Mfd. by Monarch 2” Bore x 8” Stroke 1.125” Rod Dia. 3/4”-16 ORB Ports REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. QTY 95458 92457 95460 95459 95454 95455 95425 21020614 95433 95456 95422 8151200 95452 95435 95423 50017620 1 1 1 1 1 4 2 4 1 1 1 8 1 1 1 1 11 DESCRIPTION Clevis Cap Rod Cap Piston Rod 1.125” Dia. Cylinder Tube Tie Rod Pin 1” Dia. Cotter Pin 3/16” x 1-1/2” Thread Lock Rod Clevis 1.125” x 1” Set Screw 3/8” x 1/2” Knurled Hex Nut 3/8” Hex Nut 3/4” UNF Plug 3/4” Caution Decal Seal Kit 7-1 7 8 14 8 1 12 13 7 3 Cylinder Assembly Part Number Stamped Here 15 6 5 2 12 4 9 16 10 99564 Wing Lift Hydraulic Cylinder Mfd. by Monarch 2” Bore x 8” Stroke 1.125” Rod Dia. 3/4”-16 ORB Ports REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. QTY 95458 92457 95460 95459 95454 95455 95425 21020614 95433 95456 95422 8151200 95452 95435 95423 50017620 1 1 1 1 1 4 2 4 1 1 1 8 1 1 1 1 11 DESCRIPTION Clevis Cap Rod Cap Piston Rod 1.125” Dia. Cylinder Tube Tie Rod Pin 1” Dia. Cotter Pin 3/16” x 1-1/2” Thread Lock Rod Clevis 1.125” x 1” Set Screw 3/8” x 1/2” Knurled Hex Nut 3/8” Hex Nut 3/4” UNF Plug 3/4” Caution Decal Seal Kit 7-2 7 8 NOTES: Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) 493-1300